Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Jetting
#10650
vegasdave (User)
Platinum Boarder
Posts: 1158
graphgraph
User Offline Click here to see the profile of this user
Re:Jetting 5 Years, 7 Months ago  
Sclbates wrote:
WOT test shows to be just right on the main jet. I is running great at moment with the pms screw set out at 3/4 turn out. As for the Pilot jet being to rich I agree, but it will not run with the stock pilot 35A . I think the high flow air breather will not allow it suck fuel from the 35A pilot jet, only the 50 pilot jet. What do you think?

What kinda needle ya got in there Bro? The only time ever had anything bigger than the stock 35 was a 40 and the stock yamaha hog log.When I 1st jetted with the DynoJet kit put in the 37.5 and that was to rich. Are you using
the baron`s kit or yamaha`s speedstar kit?
 
Logged Logged  
 

If Your Not Moving Forwards,Your Moving Backwards
Live To Ride,Ride To Live 06 Road Star Candy Red
SMOKIN!!!!
  The administrator has disabled public write access.
#10675
Sclbates (User)
Fresh Boarder
Posts: 4
graphgraph
User Offline Click here to see the profile of this user
Re:Jetting 5 Years, 7 Months ago  
Yamaha speedstar kit
 
Logged Logged  
  The administrator has disabled public write access.
#10703
vegasdave (User)
Platinum Boarder
Posts: 1158
graphgraph
User Offline Click here to see the profile of this user
Re:Jetting 5 Years, 7 Months ago  
Sclbates wrote:
Yamaha speedstar kit
You might want to go with a Baron`s or DynoJet kit,when the dealer did my rejetting he left in the stock needle and put in a 40 pilot.Seems that`s the what Dealer`s call rejetting .Ran like crap till I redid it myself.BUT I`d find out exactly what in your carb.Or maybe find you a rice rocket shop that don`t mind working on a cruiser.They also usually have Dyno`s in THEIR Shops. Hope this helps Sclbates keet at it.I Love My Bike Man!!
 
Logged Logged  
 

If Your Not Moving Forwards,Your Moving Backwards
Live To Ride,Ride To Live 06 Road Star Candy Red
SMOKIN!!!!
  The administrator has disabled public write access.
#10706
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17615
graph
User Online Now Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Jetting 5 Years, 7 Months ago  
Sclbates wrote:
WOT test shows to be just right on the main jet. I is running great at moment with the pms screw set out at 3/4 turn out. As for the Pilot jet being to rich I agree, but it will not run with the stock pilot 35A . I think the high flow air breather will not allow it suck fuel from the 35A pilot jet, only the 50 pilot jet. What do you think?

Something's not right. You have a very rich pilot and lean PMS.

The fuel gets 'sucked up' from the fuel bowl due to the pressure differential across the carb. The pilot jet meters the amount of fuel that the carb receives. High flow means greater pressure differential and more fuel.

Have you checked your float level?

Has the carb been cleaned lately?

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Rides, Meets, Events, 4/9/2012, 227 replies
Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ...
Latest reply, 5/26/2012
massagemick@yahoo.com: It'd be fun to crash that party, but I probably won't...see, I was thinking it was a planning meeting ...HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
228 posts, last by:
massagemick@yahoo.com
In: Bike Talk, 5/26/2012, 9 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
scottw: ===================== Pasted below is the link Baron's spring compressor that fits the R*'s rear ...Changing the shock spring
10 posts, last by:
scottw
In: Introductions, 5/26/2012, 10 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/26/2012
brown91redcam: :welcome:from MichiganHello from the Region
11 posts, last by:
brown91redcam
In: Introductions, 5/24/2012, 33 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello from Kentucky
34 posts, last by:
About_Time
In: Introductions, 5/25/2012, 30 replies
Subject: Hello to all
texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ...
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello to all
31 posts, last by:
About_Time
In: Introductions, 5/24/2012, 35 replies
Subject: Long time fan, finally a member!!
RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioLong time fan, finally a member!!
36 posts, last by:
About_Time
In: Bike Talk, 5/26/2012, 6 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/26/2012
mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated.
7 posts, last by:
mkayx
In: Tech Tips, 5/26/2012, 2 replies
Subject: fouled plugs
Fooyun: Guys Can a dirty air filter cause the plugs to foul out at low speeds 0 to 30?
Latest reply, 5/26/2012
scottw: . ========================================================================================= It ...fouled plugs
3 posts, last by:
scottw
In: Maintenance, 5/25/2012, 10 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
scottw: =================== Just wondering,since you said the Amsoil 20-50 made it run quieter what type ...I messed up the Barnett conversion some how
11 posts, last by:
scottw
In: Maintenance, 5/15/2012, 17 replies
Subject: Recommended bike stand that won't break budget??
Raindog: Hey fellas...question... Getting ready to change the rear brake pads for the first time (for me) on my '05 Roadstar Silverado, and I did some forum research to make sure I was armed with all of the ...
Latest reply, 5/26/2012
donelam304: my wife would soooo kick my ass. lol....Recommended bike stand that won't break budget??
18 posts, last by:
donelam304
In: Miscellaneous, 5/26/2012, 1 reply
Subject: WTB Fairing
Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc.
Latest reply, 5/26/2012
donelam304: how much are you looking to spend. you can pick up some new fairings pretty cheap without a radio or ...WTB Fairing
2 posts, last by:
donelam304
In: Non Motorcycle Topics, 5/25/2012, 21 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/26/2012
Stevie: LOL that is so true When I was buying my last one I called my insurance guy and told him I bought ...I'm Torn
22 posts, last by:
Stevie
In: Electrical/Electronics, 5/26/2012, 7 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/26/2012
bencadenbach: Well I just tried reversing the wires on the one that was working and it did not work at all with ...So much for simple
8 posts, last by:
bencadenbach
In: Miscellaneous, 5/25/2012, 6 replies
Subject: STOP!!! Part II
Erbman02: I figured what the heck!, lets see how much more I can stir up, really gets the juices going. So any way, drum roll please!!!...........................................................................................................................................................................................................................................................................................................................................................>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PART ...
Latest reply, 5/26/2012
huskerbob: http://youtu.be/KCSA7kKNu2YSTOP!!! Part II
7 posts, last by:
huskerbob
In: Miscellaneous, 5/26/2012, 6 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
Roger7886: Thinking he should shave some off the bill for loss of companionship, inconvenience, extra cost of ...Let the summer begin...(not quite)
7 posts, last by:
Roger7886
In: Maintenance, 5/26/2012, 21 replies
Subject: So I changed my oil... durrr
GNR10: ... went with Mobil 1 V-Twin stuff. Drained, new filter, added oil, went to start, not happening. Noticed the neg bat terminal was loose, tightened, tried again, nothing. I feel like a tool changing ...
Latest reply, 5/26/2012
Roger7886: Does your wife talk to my wife??:dry: :blink: :laugh: Probably... I like it most of the time, ...So I changed my oil... durrr
22 posts, last by:
Roger7886
In: Bolt Ons, 5/25/2012, 23 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...
Latest reply, 5/26/2012
Vic1: Curt: The teeth don't mesh properly as the 1600 belt rolls over the 1700 front pulley. Sometimes, ...Front Pulley Question - XV1600 vs XV1700
24 posts, last by:
Vic1
In: Tech Tips, 5/26/2012, 8 replies
Subject: Risers for Reckless Fairings
donelam304: Does anyone have a list of parts numbers for the venture ones. I have an 08 R* and need to get some risers for mine before i put my Reckless on. And if y'all know of a good place to get them from. Please ...
Latest reply, 5/26/2012
signal20k9: I'm sure those would fit. Others have said the Barons DT risers will work but they're exspensive. For ...Risers for Reckless Fairings
9 posts, last by:
signal20k9
In: Bike Talk, 5/25/2012, 8 replies
Subject: Road Star Versus Warrior
Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars?
Latest reply, 5/26/2012
signal20k9: My cousin has a Warrior, great bike! Fast and nimble and love the fuel injection. But as others have ...Road Star Versus Warrior
9 posts, last by:
signal20k9
In: Bolt Ons, 5/25/2012, 21 replies
Subject: if i was to sell my duals whats a fair price???
smokescreens: freedom performance 3.5" cans with black tips. overall in good shape but as anyone with freedom dual will tell youyour guna drag them in tiht turns so the right pipe has a drag mark on it (but you only ...
Latest reply, 5/26/2012
saab9k: Anything is only worth what someone are willing to pay. Guide in the real world; New price today, ...if i was to sell my duals whats a fair price???
22 posts, last by:
saab9k
In: Technical Discussions, 5/19/2012, 13 replies
Subject: air filter housing
massagemick@yahoo.com: Ok, I'm sure I'll the prize for the stupid question of the week....but how does the air filter housing come off? I've searched the forum, and I looked in the service manual.....it seems as if all I need ...
Latest reply, 5/26/2012
bthomas: That will prolly work if not I have the one that came off my pony its got holes drilled in it ...air filter housing
14 posts, last by:
bthomas
In: Bike Talk, 5/21/2012, 37 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/26/2012
Georgeherrin: YUP it was cupped pretty good too. And yup I checked pressures everytime I got on it. But even at 10,000 ...I have gone to the Darkside...
38 posts, last by:
Georgeherrin
In: Rides, Meets, Events, 4/25/2012, 41 replies
Subject: TEE SHIRT ORDER FORM 2012 CENTRAL M&G
fastjohnny: I atached the Tee Shirt order form for the M&G for 2012. All the tee shirts are black just like last year. The men's are pocket tees and the women's are not. You can also order rockers on the same form. If ...
Latest reply, 5/26/2012
Deedot: I'm coming, and my check's going in the mail today! B)TEE SHIRT ORDER FORM 2012 CENTRAL M&G
42 posts, last by:
Deedot
In: Rides, Meets, Events, 3/16/2012, 94 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/26/2012
jeckes: ;) Not sure but I know they have bibs for the drool :evil:Central M&G, 2012 June 29,30, and July 1
95 posts, last by:
jeckes
In: Non Motorcycle Topics, 5/25/2012, 8 replies
Subject: How To Catch A Bear
jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ...
Latest reply, 5/26/2012
jeckes: A joke for all climates:laugh:How To Catch A Bear
9 posts, last by:
jeckes
In: Miscellaneous, 5/24/2012, 39 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...
Latest reply, 5/26/2012
Edge51: Studs , I have a Few ...LoL Studs I have a few too...regrets I have none...:woohoo: :woohoo:Opinion about studs
40 posts, last by:
Edge51
In: Electrical/Electronics, 5/10/2012, 25 replies
Subject: pulled the trigger on the phase 7 led headlight
fetasigma: well just ordered the phase 7 led headlight and it should be here in a couple of days, cant wait to hopefully be able to see at night. anybody else running one yet? i know the rest of my led lights make ...
Latest reply, 5/26/2012
Booster: Lion what are your impressions on the light so far.pulled the trigger on the phase 7 led headlight
26 posts, last by:
Booster
In: Maintenance, 5/23/2012, 15 replies
Subject: Oil Filter Question
Sonny: While changing oil on a Mazda Protege (1.5) I noticed that the filter was the same size threads and rubber gasket as the Super Tech 7317. It is a little shorter though. I bought it at a local independent ...
Latest reply, 5/26/2012
grumpyroger: All these oil filters out there, you just want to make sure they assemble it with a steel cap and not ...Oil Filter Question
16 posts, last by:
grumpyroger
In: Technical Discussions, 5/24/2012, 35 replies
Subject: STOP!!!!
Erbman02: Stop what you are doing, if it ain't broke, it don't need no fixin. Stop with the anticipation that something is going to break down and you'll do a mod that you read on here to fix a potential issue ...
Latest reply, 5/26/2012
Darn: My mileage is down right now too, I think we are still on "Winter" blend gas up here. My only ...STOP!!!!
36 posts, last by:
Darn
In: Technical Discussions, 5/26/2012, 1 reply
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...
Latest reply, 5/26/2012
SKWEARpeg: The higher one, that connects to the metal port/nipple, with the shorter hose, hooks to the carb ...where does the hoses go?
2 posts, last by:
SKWEARpeg




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.