Re:Gremlin Discovered ! AIS / manifold Air leak. - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Jetting

Re:Gremlin Discovered ! AIS / manifold Air leak.

Favoured: 0

TOPIC: Re:Gremlin Discovered ! AIS / manifold Air leak.

Forum Tools

#216071

sailrider (User)

Senior Boarder

Posts: 281

Gremlin Discovered ! AIS / manifold Air leak. 2 Years, 9 Months ago

Removed my AIS last winter and Closed of the Vacum spigot on the Manifold with a rubber Vacum cap as sold at any automotive place . Started having strange Fuel economy , lean running, Bacfireing and Carb Coughing / Idle tuneing Issues a week or so ago and looked for advise here .....got lots of good advise as usual and thanks to those folks. Decided to re jet once more to sort some things out and discovered the Top of the Rubber plug litteraly blown off . ( that must have been the first Backfire ) This time I threaded it and installed a Stainless bolt with some RTV sealant . Fuel economy is Back and Running Perfectly . 182.5 mikuni Main jet , 37.5 Pilot jet ,PMS 3.25 turns out ,Kuryakyn Needle at second clip , went back to stock .100 Idle Air bleed . Bike has Never run better in my opinion . 41 us MPG 50 Canadian MPG loaded 2 up with all Bags . ( some town but mostly Road Driving )

Logged

The administrator has disabled public write access.

#216097

fern5407 (User)

Fresh Boarder

Posts: 45

Re:Gremlin Discovered ! AIS / manifold Air leak. 2 Years, 9 Months ago
Sailrider So the actual fix was ensuring the manifold port was properly closed up? reason i ask is that I also have the AIS system removed and have noticed a significant amount of backfiring lately coupled with poor MPG. I'll check out the maifold port and get back to you. Thanks

Logged

Last Edit: 2009/08/05 16:06 By fern5407.

Juan C Fernandez
Pembroke Pines, Fl
2003 Roadstar Midnight

The administrator has disabled public write access.

#216128

Curt (Moderator)

Never to old to ride!

Moderator

Posts: 12504

Re:Gremlin Discovered ! AIS / manifold Air leak. 2 Years, 9 Months ago
I soldered mine closed if I ever want to put a VOES on I canjust unsolder it or drill it out. I get 50 mpg highway.

Logged

My Site

Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?

The administrator has disabled public write access.

#216137

sailrider (User)

Senior Boarder

Posts: 281

Re:Gremlin Discovered ! AIS / manifold Air leak. 2 Years, 9 Months ago
Jeez Curt , That is far better MPG than the Yamaha Estimates for the R* , Im doing a good long trip to the Gaspe Peninsula this next week so Ill have a Better Sense of my Highway mileadge after that . , Oh by the way I did install the Iridium Plugs as well.........all in a Quest for your MPG !! Alweays enjoy your observations . Sailrider .

Logged

The administrator has disabled public write access.

#216140

Curt (Moderator)

Never to old to ride!

Moderator

Posts: 12504

Re:Gremlin Discovered ! AIS / manifold Air leak. 2 Years, 9 Months ago

Thanks sailrider I have worked long and hard to get mine running right and tuned right. Think I have done 4 dyno runs and been in the carb heck knows how many times. Some of the old guys on here will tell ya I was the butt of the joke for a long time because of my jetting. I got it down at the end I could rejet in 15 minutes. I haven't been in the carb in about two years now. Once ya get it right you can leave it alone.

Logged

My Site

Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?

The administrator has disabled public write access.

Forum List

Technical Corner

Jetting

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bolt Ons, 5/21/2012, 43 replies Subject: Freedom Duals Are Ready! moreland4: Well Ray at AAA Exhaust emailed me recently to inform me that the NEW Freedom True-Duals for the Road Star are ready for order/delivery. It's now decision time for me. Do I like the new 4" cans or would ... Latest reply, 5/26/2012 Plumbwader: Those are the baddest pipes on the planet. I was gonna do what rphazen did with his exhaust but its ...Freedom Duals Are Ready! 44 posts, last by: Plumbwader In: Miscellaneous, 5/26/2012, 2 replies Subject: WTB Fairing Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc. Latest reply, 5/26/2012 Just Dave: Yeah, I know they are not really that expensive but cheaper is always better if you can get a clean used ...WTB Fairing 3 posts, last by: Just Dave In: Rides, Meets, Events, 4/9/2012, 227 replies Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1 fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ... Latest reply, 5/26/2012 massagemick@yahoo.com: It'd be fun to crash that party, but I probably won't...see, I was thinking it was a planning meeting ...HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1 228 posts, last by: massagemick@yahoo.com In: Bike Talk, 5/26/2012, 9 replies Subject: Changing the shock spring Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press? Latest reply, 5/26/2012 scottw: ===================== Pasted below is the link Baron's spring compressor that fits the R's rear ...Changing the shock spring 10 posts, last by: scottw In: Introductions, 5/26/2012, 10 replies Subject: Hello from the Region kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it. Latest reply, 5/26/2012 brown91redcam: :welcome:from MichiganHello from the Region 11 posts, last by: brown91redcam In: Introductions, 5/24/2012, 33 replies Subject: Hello from Kentucky myxlr: nice to be here i ride a 2008 silverado Latest reply, 5/26/2012 About_Time: :welcome: From OntarioHello from Kentucky 34 posts, last by: About_Time In: Introductions, 5/25/2012, 30 replies Subject: Hello to all texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ... Latest reply, 5/26/2012 About_Time: :welcome: From OntarioHello to all 31 posts, last by: About_Time In: Introductions, 5/24/2012, 35 replies Subject: Long time fan, finally a member!! RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony Latest reply, 5/26/2012 About_Time: :welcome: From OntarioLong time fan, finally a member!! 36 posts, last by: About_Time In: Bike Talk, 5/26/2012, 6 replies Subject: Confused and a little frustrated. BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ... Latest reply, 5/26/2012 mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated. 7 posts, last by: mkayx In: Tech Tips, 5/26/2012, 2 replies Subject: fouled plugs Fooyun: Guys Can a dirty air filter cause the plugs to foul out at low speeds 0 to 30? Latest reply, 5/26/2012 scottw: . ========================================================================================= It ...fouled plugs 3 posts, last by: scottw In: Maintenance, 5/25/2012, 10 replies Subject: I messed up the Barnett conversion some how espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ... Latest reply, 5/26/2012 scottw: =================== Just wondering,since you said the Amsoil 20-50 made it run quieter what type ...I messed up the Barnett conversion some how 11 posts, last by: scottw In: Maintenance, 5/15/2012, 17 replies Subject: Recommended bike stand that won't break budget?? Raindog: Hey fellas...question... Getting ready to change the rear brake pads for the first time (for me) on my '05 Roadstar Silverado, and I did some forum research to make sure I was armed with all of the ... Latest reply, 5/26/2012 donelam304: my wife would soooo kick my ass. lol....Recommended bike stand that won't break budget?? 18 posts, last by: donelam304 In: Non Motorcycle Topics, 5/25/2012, 21 replies Subject: I'm Torn Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ... Latest reply, 5/26/2012 Stevie: LOL that is so true When I was buying my last one I called my insurance guy and told him I bought ...I'm Torn 22 posts, last by: Stevie In: Electrical/Electronics, 5/26/2012, 7 replies Subject: So much for simple bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ... Latest reply, 5/26/2012 bencadenbach: Well I just tried reversing the wires on the one that was working and it did not work at all with ...So much for simple 8 posts, last by: bencadenbach In: Miscellaneous, 5/25/2012, 6 replies Subject: STOP!!! Part II Erbman02: I figured what the heck!, lets see how much more I can stir up, really gets the juices going. So any way, drum roll please!!!...........................................................................................................................................................................................................................................................................................................................................................>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PART ... Latest reply, 5/26/2012 huskerbob: http://youtu.be/KCSA7kKNu2YSTOP!!! Part II 7 posts, last by: huskerbob In: Miscellaneous, 5/26/2012, 6 replies Subject: Let the summer begin...(not quite) h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ... Latest reply, 5/26/2012 Roger7886: Thinking he should shave some off the bill for loss of companionship, inconvenience, extra cost of ...Let the summer begin...(not quite) 7 posts, last by: Roger7886 In: Maintenance, 5/26/2012, 21 replies Subject: So I changed my oil... durrr GNR10: ... went with Mobil 1 V-Twin stuff. Drained, new filter, added oil, went to start, not happening. Noticed the neg bat terminal was loose, tightened, tried again, nothing. I feel like a tool changing ... Latest reply, 5/26/2012 Roger7886: Does your wife talk to my wife??:dry: :blink: :laugh: Probably... I like it most of the time, ...So I changed my oil... durrr 22 posts, last by: Roger7886 In: Bolt Ons, 5/25/2012, 23 replies Subject: Front Pulley Question - XV1600 vs XV1700 TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ... Latest reply, 5/26/2012 Vic1: Curt: The teeth don't mesh properly as the 1600 belt rolls over the 1700 front pulley. Sometimes, ...Front Pulley Question - XV1600 vs XV1700 24 posts, last by: Vic1 In: Tech Tips, 5/26/2012, 8 replies Subject: Risers for Reckless Fairings donelam304: Does anyone have a list of parts numbers for the venture ones. I have an 08 R and need to get some risers for mine before i put my Reckless on. And if y'all know of a good place to get them from. Please ... Latest reply, 5/26/2012 signal20k9: I'm sure those would fit. Others have said the Barons DT risers will work but they're exspensive. For ...Risers for Reckless Fairings 9 posts, last by: signal20k9 In: Bike Talk, 5/25/2012, 8 replies Subject: Road Star Versus Warrior Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars? Latest reply, 5/26/2012 signal20k9: My cousin has a Warrior, great bike! Fast and nimble and love the fuel injection. But as others have ...Road Star Versus Warrior 9 posts, last by: signal20k9 In: Bolt Ons, 5/25/2012, 21 replies Subject: if i was to sell my duals whats a fair price??? smokescreens: freedom performance 3.5" cans with black tips. overall in good shape but as anyone with freedom dual will tell youyour guna drag them in tiht turns so the right pipe has a drag mark on it (but you only ... Latest reply, 5/26/2012 saab9k: Anything is only worth what someone are willing to pay. Guide in the real world; New price today, ...if i was to sell my duals whats a fair price??? 22 posts, last by: saab9k In: Technical Discussions, 5/19/2012, 13 replies Subject: air filter housing massagemick@yahoo.com: Ok, I'm sure I'll the prize for the stupid question of the week....but how does the air filter housing come off? I've searched the forum, and I looked in the service manual.....it seems as if all I need ... Latest reply, 5/26/2012 bthomas: That will prolly work if not I have the one that came off my pony its got holes drilled in it ...air filter housing 14 posts, last by: bthomas In: Bike Talk, 5/21/2012, 37 replies Subject: I have gone to the Darkside... TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ... Latest reply, 5/26/2012 Georgeherrin: YUP it was cupped pretty good too. And yup I checked pressures everytime I got on it. But even at 10,000 ...I have gone to the Darkside... 38 posts, last by: Georgeherrin In: Rides, Meets, Events, 4/25/2012, 41 replies Subject: TEE SHIRT ORDER FORM 2012 CENTRAL M&G fastjohnny: I atached the Tee Shirt order form for the M&G for 2012. All the tee shirts are black just like last year. The men's are pocket tees and the women's are not. You can also order rockers on the same form. If ... Latest reply, 5/26/2012 Deedot: I'm coming, and my check's going in the mail today! B)TEE SHIRT ORDER FORM 2012 CENTRAL M&G 42 posts, last by: Deedot In: Rides, Meets, Events, 3/16/2012, 94 replies Subject: Central M&G, 2012 June 29,30, and July 1 fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ... Latest reply, 5/26/2012 jeckes: ;) Not sure but I know they have bibs for the drool :evil:Central M&G, 2012 June 29,30, and July 1 95 posts, last by: jeckes In: Non Motorcycle Topics, 5/25/2012, 8 replies Subject: How To Catch A Bear jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ... Latest reply, 5/26/2012 jeckes: A joke for all climates:laugh:How To Catch A Bear 9 posts, last by: jeckes In: Miscellaneous, 5/24/2012, 39 replies Subject: Opinion about studs rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ... Latest reply, 5/26/2012 Edge51: Studs , I have a Few ...LoL Studs I have a few too...regrets I have none...:woohoo: :woohoo:Opinion about studs 40 posts, last by: Edge51 In: Electrical/Electronics, 5/10/2012, 25 replies Subject: pulled the trigger on the phase 7 led headlight fetasigma: well just ordered the phase 7 led headlight and it should be here in a couple of days, cant wait to hopefully be able to see at night. anybody else running one yet? i know the rest of my led lights make ... Latest reply, 5/26/2012 Booster: Lion what are your impressions on the light so far.pulled the trigger on the phase 7 led headlight 26 posts, last by: Booster In: Maintenance, 5/23/2012, 15 replies Subject: Oil Filter Question Sonny: While changing oil on a Mazda Protege (1.5) I noticed that the filter was the same size threads and rubber gasket as the Super Tech 7317. It is a little shorter though. I bought it at a local independent ... Latest reply, 5/26/2012 grumpyroger: All these oil filters out there, you just want to make sure they assemble it with a steel cap and not ...Oil Filter Question 16 posts, last by: grumpyroger In: Technical Discussions, 5/24/2012, 35 replies Subject: STOP!!!! Erbman02: Stop what you are doing, if it ain't broke, it don't need no fixin. Stop with the anticipation that something is going to break down and you'll do a mod that you read on here to fix a potential issue ... Latest reply, 5/26/2012 Darn: My mileage is down right now too, I think we are still on "Winter" blend gas up here. My only ...STOP!!!! 36 posts, last by: Darn

New Forum Posts

In: Bolt Ons, 5/21/2012, 43 replies
Subject: Freedom Duals Are Ready!
moreland4: Well Ray at AAA Exhaust emailed me recently to inform me that the NEW Freedom True-Duals for the Road Star are ready for order/delivery. It's now decision time for me. Do I like the new 4" cans or would ...

Latest reply, 5/26/2012
Plumbwader: Those are the baddest pipes on the planet. I was gonna do what rphazen did with his exhaust but its ...Freedom Duals Are Ready!

44 posts, last by:

Plumbwader

In: Miscellaneous, 5/26/2012, 2 replies
Subject: WTB Fairing
Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc.

Latest reply, 5/26/2012
Just Dave: Yeah, I know they are not really that expensive but cheaper is always better if you can get a clean used ...WTB Fairing

3 posts, last by:

Just Dave

In: Rides, Meets, Events, 4/9/2012, 227 replies
Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ...

Latest reply, 5/26/2012
massagemick@yahoo.com: It'd be fun to crash that party, but I probably won't...see, I was thinking it was a planning meeting ...HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1

228 posts, last by:

massagemick@yahoo.com

In: Bike Talk, 5/26/2012, 9 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?

Latest reply, 5/26/2012
scottw: ===================== Pasted below is the link Baron's spring compressor that fits the R*'s rear ...Changing the shock spring

10 posts, last by:

scottw

In: Introductions, 5/26/2012, 10 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/26/2012
brown91redcam: :welcome:from MichiganHello from the Region

11 posts, last by:

brown91redcam

In: Introductions, 5/24/2012, 33 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado

Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello from Kentucky

34 posts, last by:

About_Time

In: Introductions, 5/25/2012, 30 replies
Subject: Hello to all
texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ...

Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello to all

31 posts, last by:

About_Time

In: Introductions, 5/24/2012, 35 replies
Subject: Long time fan, finally a member!!
RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony

Latest reply, 5/26/2012
About_Time: :welcome: From OntarioLong time fan, finally a member!!

36 posts, last by:

About_Time

In: Bike Talk, 5/26/2012, 6 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...

Latest reply, 5/26/2012
mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated.

7 posts, last by:

mkayx

In: Tech Tips, 5/26/2012, 2 replies
Subject: fouled plugs
Fooyun: Guys Can a dirty air filter cause the plugs to foul out at low speeds 0 to 30?

Latest reply, 5/26/2012
scottw: . ========================================================================================= It ...fouled plugs

3 posts, last by:

scottw

In: Maintenance, 5/25/2012, 10 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...

Latest reply, 5/26/2012
scottw: =================== Just wondering,since you said the Amsoil 20-50 made it run quieter what type ...I messed up the Barnett conversion some how

11 posts, last by:

scottw

In: Maintenance, 5/15/2012, 17 replies
Subject: Recommended bike stand that won't break budget??
Raindog: Hey fellas...question... Getting ready to change the rear brake pads for the first time (for me) on my '05 Roadstar Silverado, and I did some forum research to make sure I was armed with all of the ...

Latest reply, 5/26/2012
donelam304: my wife would soooo kick my ass. lol....Recommended bike stand that won't break budget??

18 posts, last by:

donelam304

In: Non Motorcycle Topics, 5/25/2012, 21 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...

Latest reply, 5/26/2012
Stevie: LOL that is so true When I was buying my last one I called my insurance guy and told him I bought ...I'm Torn

22 posts, last by:

Stevie

In: Electrical/Electronics, 5/26/2012, 7 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...

Latest reply, 5/26/2012
bencadenbach: Well I just tried reversing the wires on the one that was working and it did not work at all with ...So much for simple

8 posts, last by:

bencadenbach

Latest reply, 5/26/2012
huskerbob: http://youtu.be/KCSA7kKNu2YSTOP!!! Part II

7 posts, last by:

huskerbob

In: Miscellaneous, 5/26/2012, 6 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...

Latest reply, 5/26/2012
Roger7886: Thinking he should shave some off the bill for loss of companionship, inconvenience, extra cost of ...Let the summer begin...(not quite)

7 posts, last by:

Roger7886

In: Maintenance, 5/26/2012, 21 replies
Subject: So I changed my oil... durrr
GNR10: ... went with Mobil 1 V-Twin stuff. Drained, new filter, added oil, went to start, not happening. Noticed the neg bat terminal was loose, tightened, tried again, nothing. I feel like a tool changing ...

Latest reply, 5/26/2012
Roger7886: Does your wife talk to my wife??:dry: :blink: :laugh: Probably... I like it most of the time, ...So I changed my oil... durrr

22 posts, last by:

Roger7886

In: Bolt Ons, 5/25/2012, 23 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...

Latest reply, 5/26/2012
Vic1: Curt: The teeth don't mesh properly as the 1600 belt rolls over the 1700 front pulley. Sometimes, ...Front Pulley Question - XV1600 vs XV1700

24 posts, last by:

Vic1

In: Tech Tips, 5/26/2012, 8 replies
Subject: Risers for Reckless Fairings
donelam304: Does anyone have a list of parts numbers for the venture ones. I have an 08 R* and need to get some risers for mine before i put my Reckless on. And if y'all know of a good place to get them from. Please ...

Latest reply, 5/26/2012
signal20k9: I'm sure those would fit. Others have said the Barons DT risers will work but they're exspensive. For ...Risers for Reckless Fairings

9 posts, last by:

signal20k9

In: Bike Talk, 5/25/2012, 8 replies
Subject: Road Star Versus Warrior
Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars?

Latest reply, 5/26/2012
signal20k9: My cousin has a Warrior, great bike! Fast and nimble and love the fuel injection. But as others have ...Road Star Versus Warrior

9 posts, last by:

signal20k9

In: Bolt Ons, 5/25/2012, 21 replies
Subject: if i was to sell my duals whats a fair price???
smokescreens: freedom performance 3.5" cans with black tips. overall in good shape but as anyone with freedom dual will tell youyour guna drag them in tiht turns so the right pipe has a drag mark on it (but you only ...

Latest reply, 5/26/2012
saab9k: Anything is only worth what someone are willing to pay. Guide in the real world; New price today, ...if i was to sell my duals whats a fair price???

22 posts, last by:

saab9k

In: Technical Discussions, 5/19/2012, 13 replies
Subject: air filter housing
massagemick@yahoo.com: Ok, I'm sure I'll the prize for the stupid question of the week....but how does the air filter housing come off? I've searched the forum, and I looked in the service manual.....it seems as if all I need ...

Latest reply, 5/26/2012
bthomas: That will prolly work if not I have the one that came off my pony its got holes drilled in it ...air filter housing

14 posts, last by:

bthomas

In: Bike Talk, 5/21/2012, 37 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...

Latest reply, 5/26/2012
Georgeherrin: YUP it was cupped pretty good too. And yup I checked pressures everytime I got on it. But even at 10,000 ...I have gone to the Darkside...

38 posts, last by:

Georgeherrin

In: Rides, Meets, Events, 4/25/2012, 41 replies
Subject: TEE SHIRT ORDER FORM 2012 CENTRAL M&G
fastjohnny: I atached the Tee Shirt order form for the M&G for 2012. All the tee shirts are black just like last year. The men's are pocket tees and the women's are not. You can also order rockers on the same form. If ...

Latest reply, 5/26/2012
Deedot: I'm coming, and my check's going in the mail today! B)TEE SHIRT ORDER FORM 2012 CENTRAL M&G

42 posts, last by:

Deedot

In: Rides, Meets, Events, 3/16/2012, 94 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...

Latest reply, 5/26/2012
jeckes: ;) Not sure but I know they have bibs for the drool :evil:Central M&G, 2012 June 29,30, and July 1

95 posts, last by:

jeckes

In: Non Motorcycle Topics, 5/25/2012, 8 replies
Subject: How To Catch A Bear
jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ...

Latest reply, 5/26/2012
jeckes: A joke for all climates:laugh:How To Catch A Bear

9 posts, last by:

jeckes

In: Miscellaneous, 5/24/2012, 39 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...

Latest reply, 5/26/2012
Edge51: Studs , I have a Few ...LoL Studs I have a few too...regrets I have none...:woohoo: :woohoo:Opinion about studs

40 posts, last by:

Edge51

In: Electrical/Electronics, 5/10/2012, 25 replies
Subject: pulled the trigger on the phase 7 led headlight
fetasigma: well just ordered the phase 7 led headlight and it should be here in a couple of days, cant wait to hopefully be able to see at night. anybody else running one yet? i know the rest of my led lights make ...

Latest reply, 5/26/2012
Booster: Lion what are your impressions on the light so far.pulled the trigger on the phase 7 led headlight

26 posts, last by:

Booster

In: Maintenance, 5/23/2012, 15 replies
Subject: Oil Filter Question
Sonny: While changing oil on a Mazda Protege (1.5) I noticed that the filter was the same size threads and rubber gasket as the Super Tech 7317. It is a little shorter though. I bought it at a local independent ...

Latest reply, 5/26/2012
grumpyroger: All these oil filters out there, you just want to make sure they assemble it with a steel cap and not ...Oil Filter Question

16 posts, last by:

grumpyroger

In: Technical Discussions, 5/24/2012, 35 replies
Subject: STOP!!!!
Erbman02: Stop what you are doing, if it ain't broke, it don't need no fixin. Stop with the anticipation that something is going to break down and you'll do a mod that you read on here to fix a potential issue ...

Latest reply, 5/26/2012
Darn: My mileage is down right now too, I think we are still on "Winter" blend gas up here. My only ...STOP!!!!

36 posts, last by:

Darn

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.