Just how sensitive is the pms screw on your bike..?? It is said to turn it in until the engine stumbles,but mine goes in all the way and does not respond..it usually runs at 1/2 to 3/4 turn out..if i try to go back to the stock 35 pilot jet the bike wont run..i have the 37.5 that came with my cobra jet kit in and it fires right up..the common practice is 2-3 turns out..backing out makes the mixture rich..mine is rich enough at 1/2 turn out..the float level is right,would the slide needle adjustment affect on the pms screw..??Adjusting automotive carbs you can hear the rpm change..i cant notice any change going in or out 3 turns on the pms screw..its a brand new barons screw so i know its not worn or faulty..even with the stock pms it did the same thing..would the cobra jet kit make the carb act this way..the bike usually runs great but the pms is way in..