Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum Technical Corner Jetting
Re:Am I in the ballpark?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Am I in the ballpark?
#38576
Musky (User)
Platinum Boarder
Posts: 15137
graphgraph
User Offline Click here to see the profile of this user
Gender: Male
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Hey Chief

Every bike is different. Your bike will let you know what it wants And sure will let you know when it ain't happy Hope you got her dialed in. Check the mileage through 3 or 4 tanks and see how it is. Here is a thread from the RSR that talks about the pilot hole. Might clear things up. Or it might confuse things more

http://forums.delphiforums.com/1602/messages?msg=136131.1
 
Logged Logged  
 
  The administrator has disabled public write access.
#38579
Frankallen (User)
Senior Boarder
Posts: 208
graphgraph
User Offline Click here to see the profile of this user
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Big Bear....Not far from you!!! I'm in North Alabama!!! Maybe one day we can "Ride" together!!

Frank from Bama
 
Logged Logged  
 
  The administrator has disabled public write access.
#38594
Chief Hans (User)
Fresh Boarder
Posts: 24
graphgraph
User Offline Click here to see the profile of this user
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Thanks Musky. I went for a ride with my wife tonight and she rode like a charm. The bike didn't do to bad either. Yep they are both dialed in. Ride safe!
 
Logged Logged  
 
2007 Midnight Silverado
BAK
Baron\'s Ported Manifold
Dyna 3000 (34A/5000 rpm)
V&H pipes
#170 main
#35 pilot
clip @ 4th position
PMS @ 3.5+
Sea Level
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"Down shifting to pass? Then you must not be riding a Road Star.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
  The administrator has disabled public write access.
#38640
Big Bear (Moderator)
Who loves you , Baby?
Moderator
Posts: 7000
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Douglasville, Ga.
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Frankallen wrote:
Big Bear....Not far from you!!! I'm in North Alabama!!! Maybe one day we can "Ride" together!!

Frank from Bama

Where You at Frank? BB
 
Logged Logged  
 
  The administrator has disabled public write access.
#38654
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17997
graph
User Online Now Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Am I in the ballpark? 5 Years, 9 Months ago  
2007 Midnight Silverado
BAK
Baron's Ported Manifold
Dyna 3000 (34A/5000 rpm)
V&H pipes
#172.5 main
#35 pilot
clip @ 4th position
PMS @ 3.25
Sea Level

I would suggest that you're probably still to rich on the main. Try the WOT test, swith out the main and try it again. You will probably find that you will not notice a difference.

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#38656
Chief Hans (User)
Fresh Boarder
Posts: 24
graphgraph
User Offline Click here to see the profile of this user
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Doc , even at Sea Level? Big Bear is in ATL approx. 1,000 ft above where I am and he is running a #170 main. I trust you and will try a #170 main and see how it goes. I will post on the results asap. Thanks!
 
Logged Logged  
 
2007 Midnight Silverado
BAK
Baron\'s Ported Manifold
Dyna 3000 (34A/5000 rpm)
V&H pipes
#170 main
#35 pilot
clip @ 4th position
PMS @ 3.5+
Sea Level
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"Down shifting to pass? Then you must not be riding a Road Star.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
  The administrator has disabled public write access.
#38658
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17997
graph
User Online Now Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Chief Hans wrote:
Doc , even at Sea Level? Big Bear is in ATL approx. 1,000 ft above where I am and he is running a #170 main. I trust you and will try a #170 main and see how it goes. I will post on the results asap. Thanks!

.... I'm at 50' and run a 167.5.

Two bikes in the same area can have different jettings but each can be optimized. What we give you is a starting point. From there you need to tweak it a bit here and there.

Part of doing the WOT test is being able to notice a difference. I'm not suggesting you don't know what you're doing but that you'll be able to convince yourself that 'yes' there is or 'no' there isn't a definite difference between the two mains.

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#38659
Chief Hans (User)
Fresh Boarder
Posts: 24
graphgraph
User Offline Click here to see the profile of this user
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Cool Doc, and you have similar settings? I'm going to try the the #170 and then the #167.5 to see what kind of results I get on WOT. I will post asap.
 
Logged Logged  
 
2007 Midnight Silverado
BAK
Baron\'s Ported Manifold
Dyna 3000 (34A/5000 rpm)
V&H pipes
#170 main
#35 pilot
clip @ 4th position
PMS @ 3.5+
Sea Level
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"Down shifting to pass? Then you must not be riding a Road Star.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
  The administrator has disabled public write access.
#38661
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17997
graph
User Online Now Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Am I in the ballpark? 5 Years, 9 Months ago  
Yours on the left with mine on the right .....

2007 Midnight Silverado vs 2000
BAK vs Bak
Baron's Ported Manifold vs Nemesis
Dyna 3000 (34A/5000 rpm) vs Dyna at 34A
V&H pipes vs Baron's Nasties
#172.5 main vs 167.5
#35 pilot vs 35
clip @ 4th position vs 4th postion
PMS @ 3.25 vs MaxPMS at 1.25
Sea Level vs 50'

... and I'm still rich on the low end.

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#38666
Big Bear (Moderator)
Who loves you , Baby?
Moderator
Posts: 7000
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Douglasville, Ga.
Re:Am I in the ballpark? 5 Years, 9 Months ago  
We're just going to chalk that up to you being Canadian , Doc! BB
 
Logged Logged  
 
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Non Motorcycle Topics, 5/25/2013, 22 replies
Subject: Memorial Day for the Clinic
Curt: The wife made this for the Clinic for Memorial Day.
Latest reply, 5/26/2013
25bagger: talented!:)Memorial Day for the Clinic
23 posts, last by:
25bagger
In: Jetting, 5/25/2013, 8 replies
Subject: Popping on deceleration
Caraholic86: I just bought a 2004 road star 1700 with what I think is a Barron's air intake and hard krome pipes. The bike wouldn't run unless the choke was on so I cleaned the carb today and found the pilot jet stopped ...
Latest reply, 5/26/2013
Edge51: :welcome: from B.C. CanadaPopping on deceleration
9 posts, last by:
Edge51
In: Miscellaneous, 5/26/2013
Subject: i smell a $2000 roadie???
25bagger: http://okaloosa.craigslist.org/mcy/3784761808.html need money...won't crank...$3000 obo...2K might get'er.
i smell a $2000 roadie???
new topic by:
25bagger
In: Pics of My Ride, 5/22/2013, 17 replies
Subject: She's done for now
BlackRain: Thought I just share some pictures on my 2004 Honda Shadow Saber 1100 before and after pictures. She's done for now. Before: After:
Latest reply, 5/26/2013
t0rqed: All topics are welcome as long as you add pics :biglove:She's done for now
18 posts, last by:
t0rqed
In: Bolt Ons, 5/25/2013, 4 replies
Subject: Mutazu bags mounting question
T_rum: I haven't posted here in a long time, but still lurk the forum quite often. I've got my bke up and running (need to update profile pic) and have started going on long enough rides to warrant getting saddle ...
Latest reply, 5/26/2013
tankerman14: I've got the RS bags mounted on stock silverado mounts with Geno's lowering brackets.Mutazu bags mounting question
5 posts, last by:
tankerman14
In: Bike Talk, 5/25/2013, 19 replies
Subject: Broke my cylinder head breather fitting
Signguy: Broke my cylinder head breather fitting...now what? I plugged it but will this do damage? How do I get it out to change it?
Latest reply, 5/26/2013
Ricohoc: :)Broke my cylinder head breather fitting
20 posts, last by:
Ricohoc
In: Introductions, 5/24/2013, 21 replies
Subject: South Texas
St.Ranger: How's it going everybody?! My name is Noel and I live in Edcouch, Texas. I've been lurking around this site for about 2 and a half months now and decided to join. I've had my star for about 2 months ...
Latest reply, 5/26/2013
stinger: :welcome: from Burlington, NCSouth Texas
22 posts, last by:
stinger
In: Bike Talk, 5/25/2013, 12 replies
Subject: Stupid seat!
Roadstarcountryboy: Hey guys my damn seat won't come off tried all the tricks I read on here and nothing works. Went to install my new back off brake light flasher but couldn't get the seat off to save my life. Anyone have ...
Latest reply, 5/26/2013
Ricohoc: Stupid seat!
13 posts, last by:
Ricohoc
In: Body/Frame, 4/28/2013, 46 replies
Subject: Fatboy wheels in Progress
DAVECS1: Well It did not go as smooth as I was hoping but it is moving forward. Probably should of found a lathe for drilling the bushings. The steel was hard and it was a bit of a chore. They seem to fit ok there ...
Latest reply, 5/26/2013
JakePaes: Dude I like it and I bet it's the only Roadstar like it got now. See once you start something it gives ...Fatboy wheels in Progress
47 posts, last by:
JakePaes
In: Rides, Meets, Events, 5/21/2013, 24 replies
Subject: Bikes, Blues, & BBQ
Mudball: New event this weekend in Elizabethtown, KY and I'm stuck on the side lines. I had knee replacement 6 weeks ago and it's most likely be another six week before I'll be able to get back on the bike. If ...
Latest reply, 5/26/2013
USAFretired: Warden, I left my phone plugged in at the house and did not realize it until we got there. So I had no ...Bikes, Blues, & BBQ
25 posts, last by:
USAFretired
In: Vendors and Dealers, 5/25/2013, 8 replies
Subject: long ride shields
sctnmart: just wondering if anybody that has a Reckless fairing (or any fairing) that has gone for their windshield to a long ride windshield. wondering if it's worth the extra money ($40). I would like to go to ...
Latest reply, 5/25/2013
JakePaes: Well I road just shy of 700 miles in one day a couple of weeks ago with the 5" reckless shield and went ...long ride shields
9 posts, last by:
JakePaes
In: Bike Talk, 5/25/2013, 3 replies
Subject: Changing a few parts
jd750ace: Well, got my seat swapped out. Cody's ED set is mounted now. (Thanks bud!) Tall passenger backrest is mounted (Thanks Pfuller) Rear disc with 3200 miles on it (Thanks E-bay/hurricane flood) to replace ...
Latest reply, 5/25/2013
JimH: Got it,burn a few gallons if you can!Changing a few parts
4 posts, last by:
JimH
In: Non Motorcycle Topics, 5/25/2013, 37 replies
Subject: Its Saturday (corrected) Night Tunes time again!
phuturepharmd: http://youtu.be/9a8Pkw9VBR8
Latest reply, 5/25/2013
Sonny: Awesome, starts slow and builds, well worth a listenIts Saturday (corrected) Night Tunes time again!
38 posts, last by:
Sonny
In: Non Motorcycle Topics, 5/25/2013, 8 replies
Subject: smoking
sappermech: Slow smoking some pork loin and beef roast dry rubbed with my own blend of spices and applewood smoked with michelobe light to keep it moist gonna be a good dinner tomorrow.:)
Latest reply, 5/25/2013
sappermech: Well here is the end result :Psmoking
9 posts, last by:
sappermech
In: Bike Talk, 5/25/2013, 7 replies
Subject: Sorry but another Tire question
Edge51: My son has an 03 with a Bridgestone on the front. rear is flat and he's about 750 miles from home...his option is to mount aq 150 Metzler on the rear. Any comments? Yes or definitely NO? input is ...
Latest reply, 5/25/2013
JakePaes: I have had different brands on front and back many times with no problem either. When you are ...Sorry but another Tire question
8 posts, last by:
JakePaes
In: Bike Talk, 5/25/2013, 7 replies
Subject: HD Sportster vs Yamaha Bolt drag race
greyphart: http://www.youtube.com/watch?v=PQw_uNp2vHk
Latest reply, 5/25/2013
Doc_V: No question, the Bolt is faster and left some nice burnouts on take off, but i'd still rather have the ...HD Sportster vs Yamaha Bolt drag race
8 posts, last by:
Doc_V
In: Bike Talk, 5/25/2013, 9 replies
Subject: Plasti-dip....yes or no?
Roadstarcountryboy: Hey guys got an 07 r* and already have the Harley batwing fairing for it but it still needs painted. My brother suggested we use the plasti-dip and repaint the entire bike and fairing to save on money ...
Latest reply, 5/25/2013
Deedot: I'm in the process of Plasti-Dipping (is that a verb, now?) my R*. I have a slightly different reason, ...Plasti-dip....yes or no?
10 posts, last by:
Deedot
In: Non Motorcycle Topics, 5/24/2013, 8 replies
Subject: Memorial Day weekend music
ultrastar: This was written in 1965 it's a little redneck but still it's a great song
Latest reply, 5/25/2013
DoZZ: My older brother sent me a link to this a year or so back. He served USAF in SOS and AT command for ...Memorial Day weekend music
9 posts, last by:
DoZZ
In: Bike Talk, 5/25/2013
Subject: Good deal on low mi.R*
JimH: http://dallas.craigslist.org/ndf/mcy/3800803972.html Looks like a sweet deal to me.
Good deal on low mi.R*
new topic by:
JimH
In: Bike Talk, 5/25/2013, 15 replies
Subject: offer on my bike
texanrebel82: so on the way home from work and I stop a little store to get some dip, and meet a guy outside looking at my bike. We start talking about it and tell him all the stuff I have done to it.....and then he ...
Latest reply, 5/25/2013
JimH: I know that when you find a R* at a really low price you have to act quick,they disappear in a big hurry!offer on my bike
16 posts, last by:
JimH
In: Miscellaneous, 5/23/2013, 23 replies
Subject: Memorial Day Weekend Rides in Texas?
pastornj: Alright all you Texas Roadie riders B) The weather should be fine Sat-Mon 5/25-27/13 :) :) I intend to do some more riding B) in the great state of Texas before we pack up to go back to North Carolina ...
Latest reply, 5/25/2013
pastornj: Ride leaves my place: 800 Foxwood Lane, Wylie TX 75098 @ 10:00 am Monday morning. Come if you can NJ ...Memorial Day Weekend Rides in Texas?
24 posts, last by:
pastornj
In: Bike Talk, 5/25/2013, 11 replies
Subject: I thnk I'm in love!!
Signguy: http://orangecounty.craigslist.org/mcy/3761716982.html
Latest reply, 5/25/2013
JimH: Good looking ride,It's hard to beat black and chrome:laugh:I thnk I'm in love!!
12 posts, last by:
JimH
In: Jetting, 5/16/2013, 18 replies
Subject: Carb DIAPHRAM...
Vette468: Ive checked for Air leaks and i dont have one can Anybody explain how the Diaphram moves when you Twist the Throttle... Im wondeein if mines ok i cleaned it once and it seemed to Move better "before ...
Latest reply, 5/25/2013
Vette468: Thanks I cleaned it and blew it out.. I will do that in the Morning.. I know when I put the carb ...Carb DIAPHRAM...
19 posts, last by:
Vette468
In: Rides, Meets, Events, 7/8/2012, 858 replies
Subject: 2013 Spring M&G - Green Bay - June 7, 8 and 9
Darn: OK folks, I talked it over with Scootergirl, I think we can throw an awesome M&G here in Green Bay with a day ride up to and around Door County including some awesome rustic roads along lake Michigan (probably ...
Latest reply, 5/25/2013
Deedot: ... In one night?:laugh: :laugh:2013 Spring M&G - Green Bay - June 7, 8 and 9
859 posts, last by:
Deedot
In: Bike Talk, 5/25/2013, 6 replies
Subject: Considering selling
PhatRJ: Seriously considering selling. Would love to swap the bike out for a classic car that would better fit our lifestyle. B) Was thinking about asking $7500 as is sits now. 2005 Midnight edition, 36k, ...
Latest reply, 5/25/2013
Roadstarblue: Thanks for the good words brother. Part of me would hate to sell it too and I love the thing. ...Considering selling
7 posts, last by:
Roadstarblue
In: Miscellaneous, 5/25/2013, 3 replies
Subject: Not RT this year, but did my own today
Papaskispartan: I am unable to ride in RT tomorrow, as my wife planned a block party. So today, I cleaned her up this morning, and went to visit my pops, who is at Arlington. Main reason why I wanted to get stationed ...
Latest reply, 5/25/2013
JakePaes: Proud for ya brother! Sounds like your pops was a great man! Happy Memorial Day brother from one Vet ...Not RT this year, but did my own today
4 posts, last by:
JakePaes
In: Bike Talk, 5/25/2013, 6 replies
Subject: Curt's Lowers Bonus
MartyN8677: So, I picked up my lowers from Curt today, I live about a half hour away. They look great and made a big difference after they were put on. Really enjoyed meeting Curt, seeing his shop, and just visiting ...
Latest reply, 5/25/2013
Curt: They are nice and smooth mind you his is bone stock. It did seem to vibrate more than mine when I got ...Curt's Lowers Bonus
7 posts, last by:
Curt
In: Bike Talk, 5/24/2013, 7 replies
Subject: Got JTD hard lowers in
River: Got the JTD hard lowers in today, they sure don't fit a Roadstar with 1 1/2 Cobra fatty. The one they sent are just for general highway bars. Not much pleased with their roughed out crap for $200.00 ...
Latest reply, 5/25/2013
Edge51: River...I have them too. Before I ordered I called JTD and at their suggestion, I sent a pic of my bars...they ...Got JTD hard lowers in
8 posts, last by:
Edge51
In: Vendors and Dealers, 5/25/2013, 5 replies
Subject: Progressive spring
Sparks500: I'm running stock suspension now, and, after reading about air ride, progressive springs, Barons springs, and the Roadwing conversion, I'm curious as to the advantages. I rarely ride two up, and when I ...
Latest reply, 5/25/2013
jd750ace: As the founder of Race Tech is fond of saying, the best you know is the best you've ridden. Ride a bike ...Progressive spring
6 posts, last by:
jd750ace
In: Bike Talk, 5/24/2013, 35 replies
Subject: Taking the Road Star plunge
DeweyV65: As you can tell from my user name I have a Honda Magna V65 and few of you saw the mean machine at the M&G down in Iowa last year, and know how many problems I had with it. Well I am finally working on ...
Latest reply, 5/25/2013
t0rqed: NICE BIKES MORE PICS :angry: I'll buy the sheep if you throw in the honda :PTaking the Road Star plunge
36 posts, last by:
t0rqed




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.