Road Star Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 2

Page: << Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>

TOPIC: Re:Jetting the 1700 Question..... Forum Tools Post New Topic Show latest posts Rules

#42167 Roadkill1962 (User) ΜΟΛΩΝ ΛΑΒΕ Platinum Boarder Posts: 3213 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   dbachman-- First, welcome to the Clinic! I've got an '04 and am at 7,100 feet...brought it up from Phoenix (900 ft), so I've had to do a lot of leaning out to get it to run right at altitude. My setup is: DJ 175 main stock 35 pilot clip on 4th groove from the blunt end of the needle PMS @ 2.5 Accel pump nut flipped and all the way in Ported manifold SAK (Speedstar Air Kit) HK 3" Big Straights No fuel pump Vented gas cap With that setup, I'm finally to the point where the back spark plugs are not all sooty. I went too lean for a little while (170 main, needle on 3rd clip, PMS at 2) but lost a lot of power, so I'm happy with the current setup. Hope some or any of that helps! RK   Logged     “To compel a man to subsidize with his taxes the propagation of ideas which he disbelieves and abhors is sinful and tyrannical.” - Thomas Jefferson   The administrator has disabled public write access. #42275 dbachman (User) Fresh Boarder Posts: 9 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Hi Muskie, I took the bowl off of my carb and found a 175 main jet and the pilot jet just says "F" on it. What does the F mean? Thanks,   Logged     The administrator has disabled public write access. #42276 Musky (User) Platinum Boarder Posts: 15137 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   dbachman wrote: Hi Muskie, I took the bowl off of my carb and found a 175 main jet and the pilot jet just says "F" on it Hey db Are there any other markings on the main? Who makes the jet is important. For example a: 175 Mikuni is equal to about a 187 Dynojet 175 Dynojet is equal to a 164 Mikuni   Logged       The administrator has disabled public write access. #42278 dbachman (User) Fresh Boarder Posts: 9 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   I'll go pull it. My plugs were black and sooty after a 60 mph ride. maybe 1/8 - 1/4 throttle. Back in a minute   Logged     The administrator has disabled public write access. #42279 dbachman (User) Fresh Boarder Posts: 9 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Hi Muskie, It just has a 175 stamped on the top of it - no other markings.   Logged     The administrator has disabled public write access. #42282 Roadkill1962 (User) ΜΟΛΩΝ ΛΑΒΕ Platinum Boarder Posts: 3213 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Sounds like a Dynojet...don't all the Mikunis have that little square mark thingie stamped on top like the stock one? RK   Logged     “To compel a man to subsidize with his taxes the propagation of ideas which he disbelieves and abhors is sinful and tyrannical.” - Thomas Jefferson   The administrator has disabled public write access. #42283 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 17615 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Yes, a Mikuni has a square on it. Its a DJ. Where's the clip on the needle? Doc   Logged     My Bike Website   The administrator has disabled public write access. #42289 Musky (User) Platinum Boarder Posts: 15137 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Hey db I see RK and Doc alreray got you covered on the main. Need to know what the needle is set at like Doc said. And do you know if your manifold has been ported or if you have an aftermarket manifold.   Logged       The administrator has disabled public write access. #42293 Cougar (User) Platinum Boarder Posts: 3210 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   The Mikuni has a square within a square the smaller square inside the square being in the lower left hand corner the DJ is stamped size on the head nothing else..not being anal just remember how nuts it drove me trying to figure if I had Pro jets ..Coug   Logged       The administrator has disabled public write access. #42294 Musky (User) Platinum Boarder Posts: 15137 Re:Jetting the 1700 Question..... 4 Years, 8 Months ago   Cougar wrote: just remember how nuts it drove me trying to figure if I had Pro jets ..Coug I rememebr that Factory Pro weren't they? Marked on the side?   Logged     Last Edit: 2007/09/21 19:26 By Musky.     The administrator has disabled public write access.

Page: << Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>

Forum List Technical Corner Jetting

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->