Re:Where do these hoses go? - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Jetting

Re:Where do these hoses go?

Favoured: 0

Page:
<< Start < Prev 1 2 Next > End >>

TOPIC: Re:Where do these hoses go?

Forum Tools

#461946

texasscott1 (User)

Two of a kind

Platinum Boarder

Posts: 2486

Re:Where do these hoses go? 1 Year, 2 Months ago

Doc_V wrote:
Green one goes somewhere else, that's what's got me stumped. There's another one, not shown in these photos, that goes to the boot. The other end of the green one goes toward the fuel pump, just above the choke, next to the fuel line, but cant see exactly where.

Also, what about this line in red below? Should it be on the carb if I'm using a Hyper Charger with the AIS removed?

I asked myself, what are ya doing Scott, get of your lazy bum and go look at the shop manual.LOL It is as I thought, the green hose goes from the little vent at the top front of the carb to the California emissions solenoid toward the front of the bike, like in the diagram shown. And the opening at the bottom rear of the carb is connected directly to the charcoal canister.

Logged

My 99 Standard Test Mule
Scott B.

The administrator has disabled public write access.

#461948

moreland4 (User)

Chrome ain't for sissies

Platinum Boarder

Posts: 1770

Re:Where do these hoses go? 1 Year, 2 Months ago
Those poor Cali bikes. Sure looks like a whole lot of

Logged

2004 Road Star Midnight

The administrator has disabled public write access.

#461959

texasscott1 (User)

Two of a kind

Platinum Boarder

Posts: 2486

Re:Where do these hoses go? 1 Year, 2 Months ago
Oh, and there'll also be a hose connecting the solenoid to the back of the air filter. Sorry, forgot that. That way when the solenoid opens to purge the charcoal canister it's drawing in filtered air. The tank vent is also connected to the charcoal canister through a rollover valve.

Logged

My 99 Standard Test Mule
Scott B.

The administrator has disabled public write access.

#461979

Lucky1 (User)

I kill bugs, with my face

Platinum Boarder

Posts: 1187

Re:Where do these hoses go? 1 Year, 2 Months ago
I had the same problem. If I don't put it back together the same day I took it a part, I'm screwed. Must be the beer.

Logged

The administrator has disabled public write access.

Page:
<< Start < Prev 1 2 Next > End >>

Forum List

Technical Corner

Jetting

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bike Talk, 5/20/2013 Subject: stock studded seats Roadie_Shane: im looking to sale(+ship) or trade these, just show me what you got. look brand new! will be cleaned before shipped just for you! thanks! send me pm or leave a post. i will update once gone! stock studded seats new topic by: Roadie_Shane In: Maintenance, 5/16/2013, 29 replies Subject: Front end feeling rox: Went for a ride on the 04 RS tonight and experienced a front end issue. At most any speed if I sway the bike from side to side I feel what I describe as a grind. It happens both left and right sway. I ... Latest reply, 5/20/2013 blue_star: Pretty simple to tighten up the steering head and it will make it feel much better. We will be here if ...Front end feeling 30 posts, last by: blue_star In: Miscellaneous, 5/20/2013, 3 replies Subject: Rain Gear and trip accessories RoadiesRock05: I am taking a trip this weekend to Duluth, MN. I am leaving Wednesday and returning Monday. The forecast calls for rain :( Any opinions about what is the best rain gear to get for a good price? I would ... Latest reply, 5/20/2013 blue_star: I agree with JD about not changing anything right before a trip. A power outlet should be pretty safe ...Rain Gear and trip accessories 4 posts, last by: blue_star In: Bike Talk, 5/20/2013, 1 reply Subject: Shinko 777 Recommended PSI MartyN8677: Went to their website and emailed them this question. Here is the response I received: Hi Marty, Maximum recommended pressure for most all 777 tires is 42 psi. I would run around 38 psi for all around ... Latest reply, 5/20/2013 chiefriceburner: Thanks for sharing :)Shinko 777 Recommended PSI 2 posts, last by: chiefriceburner In: Rides, Meets, Events, 7/8/2012, 796 replies Subject: 2013 Spring M&G - Green Bay - June 7, 8 and 9 Darn: OK folks, I talked it over with Scootergirl, I think we can throw an awesome M&G here in Green Bay with a day ride up to and around Door County including some awesome rustic roads along lake Michigan (probably ... Latest reply, 5/20/2013 Darn: Need to kick this into high gear if we are going to hit 1000 posts2013 Spring M&G - Green Bay - June 7, 8 and 9 797 posts, last by: Darn In: Body/Frame, 5/20/2013, 1 reply Subject: Question for audio guys samw: Getting ready to mount the stereo in my fairing and I was wondering since I have a marine stereo is it necessary to use a cover? The bike stays in the shop at night unless I'm traveling,but I do ride in ... Latest reply, 5/20/2013 chiefriceburner: Marine does not mean 100% waterproof so if you can use a cover you should.Question for audio guys 2 posts, last by: chiefriceburner In: Non Motorcycle Topics, 5/20/2013, 7 replies Subject: suburban Oklahoma city getting hammered right now. Blackroadie: 5 pm news (eastern time) talking about a suburban Oklahoma city ( moore) just got hit with a tornado.... 2 elementary schools in the direct path as schools in session.....homes and business's destroyed ... Latest reply, 5/20/2013 Sparks500: These storms seem like they're developing faster and are more intense.suburban Oklahoma city getting hammered right now. 8 posts, last by: Sparks500 In: Pics of My Ride, 5/19/2013, 15 replies Subject: Winter mods before and after take 2 RoadiesRock05: Here is my attempt to upload my pics with photobucket. Latest reply, 5/20/2013 RoadiesRock05: Thanks, I like the blue.Winter mods before and after take 2 16 posts, last by: RoadiesRock05 In: Non Motorcycle Topics, 5/20/2013, 16 replies Subject: I'm gonna be a grandfather Claymeister: Its has officially been announced today. Of course I have known for a couple weeks... My daughter(24y) is going to be a mommy. That makes me going to be : A Grandfather ! Yea. She is due in mid ... Latest reply, 5/20/2013 ultrastar: Congrats ClayI'm gonna be a grandfather 17 posts, last by: ultrastar In: Miscellaneous, 5/13/2013, 21 replies Subject: cleaning Sparks500: Out the garage. One set stock exhaust drilled to stage 3. Free, Chicago area pickup only One set stock exhaust. Free, Chicago area pickup only. Stock seats. The drivers seat was experimented ... Latest reply, 5/20/2013 Sparks500: Happy you're happy. I'm happy to give them a good home, wife's happy they're out of the garage. Everybody ...cleaning 22 posts, last by: Sparks500 In: Bike Talk, 5/20/2013, 22 replies Subject: Two different worlds Deerkiller: So, yesterday, me and a buddy took a long ride on our sportbikes. Me on my R1, he on his Ducati 848. Found a nice twisty road along the Maumee River. The farther away we got from the city, the less traffic ... Latest reply, 5/20/2013 Doc_V: Yah, there's an art to setting up the suspension on modern sport bikes. There's a guy out here called ...Two different worlds 23 posts, last by: Doc_V In: Bike Talk, 5/20/2013, 1 reply Subject: V&H pro pipe carb setting Sparks500: Just put on the pro pipe and now I could use some suggestions for the carb settings. When I got the bike, it had v&h long shots on it, and it has a jet kit. Which one i have no idea. I'm getting some popping ... Latest reply, 5/20/2013 davej: If you look to see what jetting you currently have it might be a good indicator as to what jet kit you ...V&H pro pipe carb setting 2 posts, last by: davej In: Miscellaneous, 3/13/2013, 394 replies Subject: RSC Pay it Forward Thread GreenMachine: Hey guys. Greyphart recently sent me a fuel pump cover free of charge, and only asked that I pay it forward. Thanks greyphart! :) In the spirit of generosity so often found around here I had what I ... Latest reply, 5/20/2013 Jonathan: If anyone has the left stock windshield mounting hardware, mine is cracked.RSC Pay it Forward Thread 395 posts, last by: Jonathan In: Bolt Ons, 5/20/2013, 1 reply Subject: Extra Part Free tarcon: Any one need a stock backrest? Latest reply, 5/20/2013 MountainCruiser: That would be awesome! PM sent.Extra Part Free 2 posts, last by: MountainCruiser In: Bolt Ons, 5/2/2013, 17 replies Subject: trailer hitch template arrived HEAVY METAL: I want to give a special thanks to grayphart for going the extra distance and sending me a template for making trailer hitch for my 03' road. the template arrived today and the wifey told me to get me ... Latest reply, 5/20/2013 Martorious: +1trailer hitch template arrived 18 posts, last by: Martorious In: Miscellaneous, 5/20/2013, 1 reply Subject: tornado seminole_bob: 2nd day of severe weather here. Man i'm tired of this. Guess it's time to install a storm shelter. Shawnee Oklahoma hit yesterday by a tornado lots of people lost homes and some lives. Today it hit south ... Latest reply, 5/20/2013 Curt: Oklahoma and Texas always get it this time of year and there are going to be more severe weather tomorrow ...tornado 2 posts, last by: Curt In: Miscellaneous, 5/20/2013, 7 replies Subject: Paying it forward The Sheepdog: 1 new stock R spring 1 840lb Goldwing spring(Gone) Free to good homes I also have a Kury Twin velocity. This is the Jona Model. Went from him and has changed hands a few times I think. It ... Latest reply, 5/20/2013 blue_star: Bump for the Sheepdog. :)Paying it forward 8 posts, last by: blue_star In: Maintenance, 5/20/2013, 7 replies Subject: "Clanking"/metallic rattle on pull away & cruising Schweeet Daddy T: Ok so on pull away and when coasting or cruising with very little throttle there is this metal like clanking sound from what sounds like the front part of the engine to the left side. If I had to describe ... Latest reply, 5/20/2013 Stocked: The m2c means (my 2 cents) so he was just saying to check the front pulley. You can pull the cover ..."Clanking"/metallic rattle on pull away & cruising 8 posts, last by: Stocked In: Introductions, 5/17/2013, 22 replies Subject: Hello from the Great Lakes State! wadepiehl91: I was looking for web sites that would help me to find out how to modify my stock exhausts when I stumbled upon this site. After reading a few how to's , I can say I'm excited to be a part of the community ... Latest reply, 5/20/2013 Sparks500: Welcome fom the Chicago area! If you get down ths way, I'll give you a set of stock pipes already ...Hello from the Great Lakes State! 23 posts, last by: Sparks500 In: Electrical/Electronics, 5/20/2013, 1 reply Subject: HELP! How do you open the wire bundle clip? Doc_V: I'm trying to replace my speed sensor and can't even figure out how to open the plastic clip, that holds the bundle of wires together, located under the side cover. It's not like the other clips used for ... Latest reply, 5/20/2013 GNR10: I think you have to mash it sideways (well to make it comealoose). Seems when I put Erb Wires in I just ...HELP! How do you open the wire bundle clip? 2 posts, last by: GNR10 In: Miscellaneous, 5/20/2013, 2 replies Subject: Hey KAI.. VikingWarhorse: You ended this vid about 50 yards from my old house!!! http://www.youtube.com/watch?v=uykKGZTid8I&list=UUJMgBYkhCDNNuZM9buYDOvg Latest reply, 5/20/2013 Kaidallac: Wow, that was kewl Viking!!! I'm always up there riding around. KaiHey KAI.. 3 posts, last by: Kaidallac In: Bike Talk, 5/20/2013, 17 replies Subject: Intervention Needed MartyN8677: Hi, my name is Marty, and I can't stop spending money on accessories for my Roadstar. I really thought I got a great deal purchasing my bike. But, it was all stock. Since then, I have added an ED ... Latest reply, 5/20/2013 Kaidallac: FYI Smokes is one the the ones I end up spending money looking at. DAMN IT. Yup +1 :laugh:Intervention Needed 18 posts, last by: Kaidallac In: Bolt Ons, 5/14/2013, 15 replies Subject: Fitment - What fits what ? SoCali Rider: I've tried searching past threads looking for answers to some of my questions as to what will fit what, and I realize you can make anything fit with a little effort ! My reasoning is that I like changing ... Latest reply, 5/20/2013 Tug: It's simple, ghost brackets and easy brackets don't give any support to the bottom of the bags like the ...Fitment - What fits what ? 16 posts, last by: Tug In: Bike Talk, 5/19/2013, 28 replies Subject: carb guru's / dyno need some advice SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ... Latest reply, 5/20/2013 SMOKINJOE: Just want to thank everyone for their contribution. this has been a real eye opener to air/fuel ratio's. ...carb guru's / dyno need some advice 29 posts, last by: SMOKINJOE In: Bike Talk, 5/20/2013, 4 replies Subject: Will these fit roadie ? Ashley: Wondering if thses will fit my fender http://charlotte.craigslist.org/mcy/3780516413.html Latest reply, 5/20/2013 Scooter76: Oh well . Scooter , here is some chrome :rolleyes: :rolleyes: http://charlotte.craigslist.org/mcy/3780516413.html ...Will these fit roadie ? 5 posts, last by: Scooter76 In: Jetting, 5/18/2013, 35 replies Subject: Very Heavy Fuel Consumption Schweeet Daddy T: My fuel consumption is ridiculous... 17mpg and this with no mods on the bike except a half of stage one gutting of the stock pipes. I say half because I only removed the rear cone and drilled through ... Latest reply, 5/20/2013 BubbaKahuna: What octane fuel are you running? If your bike is stock you should be running 87 octane regular, that's ...Very Heavy Fuel Consumption 36 posts, last by: BubbaKahuna In: Miscellaneous, 5/20/2013, 2 replies Subject: Studding non studded bags Jonathan: Is there an easy way to add studs to a new bag set I'm getting? Latest reply, 5/20/2013 blue_star: The easy way would be to pay someone else to put them on. :P Don't think I would really want to do that ...Studding non studded bags 3 posts, last by: blue_star In: Body/Frame, 5/20/2013, 5 replies Subject: To those that have removed the rear fender support Dvox: I have an 02 project bobber I'm working on. The previous owner has removed the rear fender support. I'm trying to get ideas for welding on or bolting on a "bobbed" rear fender that goes to about the center ... Latest reply, 5/20/2013 blue_star: You could do something similar to what Curt did on his. His fender is mounted to the swingarm. To those that have removed the rear fender support 6 posts, last by: blue_star In: Technical Discussions, 5/20/2013, 8 replies Subject: why are the teeth on my rear pulley so worn? smokescreens: Last night i was looking at my new pulley and figuring out what i needed to do about a spacer and i noticed the teeth on my old pulley are worn pretty well. I noticed my belt has been making alittle noise ... Latest reply, 5/20/2013 Erbman02: If it is a aluminum, then belt tension. The aluminum pulleys, whether front or rear are more prone to ...why are the teeth on my rear pulley so worn? 9 posts, last by: Erbman02 In: Rides, Meets, Events, 5/20/2013, 8 replies Subject: Throttle Fest Chicago in June Signalman68: Anyone planning on riding to Chicago in June for Throttlefest? Would love to see a bunch of Roadstars up there. I'll be riding with about six Harleys, showing them the way of course on Friday and Saturday. ... Latest reply, 5/20/2013 BubbaKahuna: I thought the 'Non Motorcycle Topics' forum was for whining about politics. :pinch: On topic: I've ...Throttle Fest Chicago in June 9 posts, last by: BubbaKahuna

New Forum Posts

In: Bike Talk, 5/20/2013
Subject: stock studded seats
Roadie_Shane: im looking to sale(+ship) or trade these, just show me what you got. look brand new! will be cleaned before shipped just for you! thanks! send me pm or leave a post. i will update once gone!
stock studded seats

new topic by:

Roadie_Shane

In: Maintenance, 5/16/2013, 29 replies
Subject: Front end feeling
rox: Went for a ride on the 04 RS tonight and experienced a front end issue. At most any speed if I sway the bike from side to side I feel what I describe as a grind. It happens both left and right sway. I ...

Latest reply, 5/20/2013
blue_star: Pretty simple to tighten up the steering head and it will make it feel much better. We will be here if ...Front end feeling

30 posts, last by:

blue_star

In: Miscellaneous, 5/20/2013, 3 replies
Subject: Rain Gear and trip accessories
RoadiesRock05: I am taking a trip this weekend to Duluth, MN. I am leaving Wednesday and returning Monday. The forecast calls for rain :( Any opinions about what is the best rain gear to get for a good price? I would ...

Latest reply, 5/20/2013
blue_star: I agree with JD about not changing anything right before a trip. A power outlet should be pretty safe ...Rain Gear and trip accessories

4 posts, last by:

blue_star

In: Bike Talk, 5/20/2013, 1 reply
Subject: Shinko 777 Recommended PSI
MartyN8677: Went to their website and emailed them this question. Here is the response I received: Hi Marty, Maximum recommended pressure for most all 777 tires is 42 psi. I would run around 38 psi for all around ...

Latest reply, 5/20/2013
chiefriceburner: Thanks for sharing :)Shinko 777 Recommended PSI

2 posts, last by:

chiefriceburner

In: Rides, Meets, Events, 7/8/2012, 796 replies
Subject: 2013 Spring M&G - Green Bay - June 7, 8 and 9
Darn: OK folks, I talked it over with Scootergirl, I think we can throw an awesome M&G here in Green Bay with a day ride up to and around Door County including some awesome rustic roads along lake Michigan (probably ...

Latest reply, 5/20/2013
Darn: Need to kick this into high gear if we are going to hit 1000 posts2013 Spring M&G - Green Bay - June 7, 8 and 9

797 posts, last by:

Darn

In: Body/Frame, 5/20/2013, 1 reply
Subject: Question for audio guys
samw: Getting ready to mount the stereo in my fairing and I was wondering since I have a marine stereo is it necessary to use a cover? The bike stays in the shop at night unless I'm traveling,but I do ride in ...

Latest reply, 5/20/2013
chiefriceburner: Marine does not mean 100% waterproof so if you can use a cover you should.Question for audio guys

2 posts, last by:

chiefriceburner

In: Non Motorcycle Topics, 5/20/2013, 7 replies
Subject: suburban Oklahoma city getting hammered right now.
Blackroadie: 5 pm news (eastern time) talking about a suburban Oklahoma city ( moore) just got hit with a tornado.... 2 elementary schools in the direct path as schools in session.....homes and business's destroyed ...

Latest reply, 5/20/2013
Sparks500: These storms seem like they're developing faster and are more intense.suburban Oklahoma city getting hammered right now.

8 posts, last by:

Sparks500

In: Pics of My Ride, 5/19/2013, 15 replies
Subject: Winter mods before and after take 2
RoadiesRock05: Here is my attempt to upload my pics with photobucket.

Latest reply, 5/20/2013
RoadiesRock05: Thanks, I like the blue.Winter mods before and after take 2

16 posts, last by:

RoadiesRock05

In: Non Motorcycle Topics, 5/20/2013, 16 replies
Subject: I'm gonna be a grandfather
Claymeister: Its has officially been announced today. Of course I have known for a couple weeks... My daughter(24y) is going to be a mommy. That makes me going to be : A Grandfather ! Yea. She is due in mid ...

Latest reply, 5/20/2013
ultrastar: Congrats ClayI'm gonna be a grandfather

17 posts, last by:

ultrastar

In: Miscellaneous, 5/13/2013, 21 replies
Subject: cleaning
Sparks500: Out the garage. One set stock exhaust drilled to stage 3. Free, Chicago area pickup only One set stock exhaust. Free, Chicago area pickup only. Stock seats. The drivers seat was experimented ...

Latest reply, 5/20/2013
Sparks500: Happy you're happy. I'm happy to give them a good home, wife's happy they're out of the garage. Everybody ...cleaning

22 posts, last by:

Sparks500

In: Bike Talk, 5/20/2013, 22 replies
Subject: Two different worlds
Deerkiller: So, yesterday, me and a buddy took a long ride on our sportbikes. Me on my R1, he on his Ducati 848. Found a nice twisty road along the Maumee River. The farther away we got from the city, the less traffic ...

Latest reply, 5/20/2013
Doc_V: Yah, there's an art to setting up the suspension on modern sport bikes. There's a guy out here called ...Two different worlds

23 posts, last by:

Doc_V

In: Bike Talk, 5/20/2013, 1 reply
Subject: V&H pro pipe carb setting
Sparks500: Just put on the pro pipe and now I could use some suggestions for the carb settings. When I got the bike, it had v&h long shots on it, and it has a jet kit. Which one i have no idea. I'm getting some popping ...

Latest reply, 5/20/2013
davej: If you look to see what jetting you currently have it might be a good indicator as to what jet kit you ...V&H pro pipe carb setting

2 posts, last by:

davej

In: Miscellaneous, 3/13/2013, 394 replies
Subject: RSC Pay it Forward Thread
GreenMachine: Hey guys. Greyphart recently sent me a fuel pump cover free of charge, and only asked that I pay it forward. Thanks greyphart! :) In the spirit of generosity so often found around here I had what I ...

Latest reply, 5/20/2013
Jonathan: If anyone has the left stock windshield mounting hardware, mine is cracked.RSC Pay it Forward Thread

395 posts, last by:

Jonathan

In: Bolt Ons, 5/20/2013, 1 reply
Subject: Extra Part Free
tarcon: Any one need a stock backrest?

Latest reply, 5/20/2013
MountainCruiser: That would be awesome! PM sent.Extra Part Free

2 posts, last by:

MountainCruiser

In: Bolt Ons, 5/2/2013, 17 replies
Subject: trailer hitch template arrived
HEAVY METAL: I want to give a special thanks to grayphart for going the extra distance and sending me a template for making trailer hitch for my 03' road*. the template arrived today and the wifey told me to get me ...

Latest reply, 5/20/2013
Martorious: +1trailer hitch template arrived

18 posts, last by:

Martorious

In: Miscellaneous, 5/20/2013, 1 reply
Subject: tornado
seminole_bob: 2nd day of severe weather here. Man i'm tired of this. Guess it's time to install a storm shelter. Shawnee Oklahoma hit yesterday by a tornado lots of people lost homes and some lives. Today it hit south ...

Latest reply, 5/20/2013
Curt: Oklahoma and Texas always get it this time of year and there are going to be more severe weather tomorrow ...tornado

2 posts, last by:

Curt

In: Miscellaneous, 5/20/2013, 7 replies
Subject: Paying it forward
The Sheepdog: 1 new stock R* spring 1 840lb Goldwing spring(Gone) Free to good homes I also have a Kury Twin velocity. This is the Jona Model. Went from him and has changed hands a few times I think. It ...

Latest reply, 5/20/2013
blue_star: Bump for the Sheepdog. :)Paying it forward

8 posts, last by:

blue_star

In: Maintenance, 5/20/2013, 7 replies
Subject: "Clanking"/metallic rattle on pull away & cruising
Schweeet Daddy T: Ok so on pull away and when coasting or cruising with very little throttle there is this metal like clanking sound from what sounds like the front part of the engine to the left side. If I had to describe ...

Latest reply, 5/20/2013
Stocked: The m2c means (my 2 cents) so he was just saying to check the front pulley. You can pull the cover ..."Clanking"/metallic rattle on pull away & cruising

8 posts, last by:

Stocked

In: Introductions, 5/17/2013, 22 replies
Subject: Hello from the Great Lakes State!
wadepiehl91: I was looking for web sites that would help me to find out how to modify my stock exhausts when I stumbled upon this site. After reading a few how to's , I can say I'm excited to be a part of the community ...

Latest reply, 5/20/2013
Sparks500: Welcome fom the Chicago area! If you get down ths way, I'll give you a set of stock pipes already ...Hello from the Great Lakes State!

23 posts, last by:

Sparks500

In: Electrical/Electronics, 5/20/2013, 1 reply
Subject: HELP! How do you open the wire bundle clip?
Doc_V: I'm trying to replace my speed sensor and can't even figure out how to open the plastic clip, that holds the bundle of wires together, located under the side cover. It's not like the other clips used for ...

Latest reply, 5/20/2013
GNR10: I think you have to mash it sideways (well to make it comealoose). Seems when I put Erb Wires in I just ...HELP! How do you open the wire bundle clip?

2 posts, last by:

GNR10

In: Miscellaneous, 5/20/2013, 2 replies
Subject: Hey KAI..
VikingWarhorse: You ended this vid about 50 yards from my old house!!! http://www.youtube.com/watch?v=uykKGZTid8I&list=UUJMgBYkhCDNNuZM9buYDOvg

Latest reply, 5/20/2013
Kaidallac: Wow, that was kewl Viking!!! I'm always up there riding around. KaiHey KAI..

3 posts, last by:

Kaidallac

In: Bike Talk, 5/20/2013, 17 replies
Subject: Intervention Needed
MartyN8677: Hi, my name is Marty, and I can't stop spending money on accessories for my Roadstar. I really thought I got a great deal purchasing my bike. But, it was all stock. Since then, I have added an ED ...

Latest reply, 5/20/2013
Kaidallac: FYI Smokes is one the the ones I end up spending money looking at. DAMN IT. Yup +1 :laugh:Intervention Needed

18 posts, last by:

Kaidallac

In: Bolt Ons, 5/14/2013, 15 replies
Subject: Fitment - What fits what ?
SoCali Rider: I've tried searching past threads looking for answers to some of my questions as to what will fit what, and I realize you can make anything fit with a little effort ! My reasoning is that I like changing ...

Latest reply, 5/20/2013
Tug: It's simple, ghost brackets and easy brackets don't give any support to the bottom of the bags like the ...Fitment - What fits what ?

16 posts, last by:

Tug

In: Bike Talk, 5/19/2013, 28 replies
Subject: carb guru's / dyno need some advice
SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ...

Latest reply, 5/20/2013
SMOKINJOE: Just want to thank everyone for their contribution. this has been a real eye opener to air/fuel ratio's. ...carb guru's / dyno need some advice

29 posts, last by:

SMOKINJOE

In: Bike Talk, 5/20/2013, 4 replies
Subject: Will these fit roadie ?
Ashley: Wondering if thses will fit my fender http://charlotte.craigslist.org/mcy/3780516413.html

Latest reply, 5/20/2013
Scooter76: Oh well . Scooter , here is some chrome :rolleyes: :rolleyes: http://charlotte.craigslist.org/mcy/3780516413.html ...Will these fit roadie ?

5 posts, last by:

Scooter76

In: Jetting, 5/18/2013, 35 replies
Subject: Very Heavy Fuel Consumption
Schweeet Daddy T: My fuel consumption is ridiculous... 17mpg and this with no mods on the bike except a half of stage one gutting of the stock pipes. I say half because I only removed the rear cone and drilled through ...

Latest reply, 5/20/2013
BubbaKahuna: What octane fuel are you running? If your bike is stock you should be running 87 octane regular, that's ...Very Heavy Fuel Consumption

36 posts, last by:

BubbaKahuna

In: Miscellaneous, 5/20/2013, 2 replies
Subject: Studding non studded bags
Jonathan: Is there an easy way to add studs to a new bag set I'm getting?

Latest reply, 5/20/2013
blue_star: The easy way would be to pay someone else to put them on. :P Don't think I would really want to do that ...Studding non studded bags

3 posts, last by:

blue_star

In: Body/Frame, 5/20/2013, 5 replies
Subject: To those that have removed the rear fender support
Dvox: I have an 02 project bobber I'm working on. The previous owner has removed the rear fender support. I'm trying to get ideas for welding on or bolting on a "bobbed" rear fender that goes to about the center ...

Latest reply, 5/20/2013
blue_star: You could do something similar to what Curt did on his. His fender is mounted to the swingarm. To those that have removed the rear fender support

6 posts, last by:

blue_star

In: Technical Discussions, 5/20/2013, 8 replies
Subject: why are the teeth on my rear pulley so worn?
smokescreens: Last night i was looking at my new pulley and figuring out what i needed to do about a spacer and i noticed the teeth on my old pulley are worn pretty well. I noticed my belt has been making alittle noise ...

Latest reply, 5/20/2013
Erbman02: If it is a aluminum, then belt tension. The aluminum pulleys, whether front or rear are more prone to ...why are the teeth on my rear pulley so worn?

9 posts, last by:

Erbman02

In: Rides, Meets, Events, 5/20/2013, 8 replies
Subject: Throttle Fest Chicago in June
Signalman68: Anyone planning on riding to Chicago in June for Throttlefest? Would love to see a bunch of Roadstars up there. I'll be riding with about six Harleys, showing them the way of course on Friday and Saturday. ...

Latest reply, 5/20/2013
BubbaKahuna: I thought the 'Non Motorcycle Topics' forum was for whining about politics. :pinch: On topic: I've ...Throttle Fest Chicago in June

9 posts, last by:

BubbaKahuna

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.