Road Star Clinic Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

TOPIC: Re:Need jetting advice... Forum Tools Post New Topic Show latest posts Rules

#5994 jackson (User) Fresh Boarder Posts: 4 Need jetting advice... 2 Years, 7 Months ago   Hello, I have a 01' R* Midnight withe the following: 1. AIS romoved 2. DJ jet kit also bought a few extra jets that were not in the kit, DJ180 and a DJ178.7 (these were the closest to the Mikuni 167.7) 3. BUB Chambermaids w/baffles 4. K&amp;N air kit (not just the filter in the stock air box) 5. I noticed the durations screw is all the way in w/ the nut on the backside and I know they don't come this was stock.. I need to know wich main jet, needle setup, and PMS setting to get me started.. also if I should adjust the accelerator pump screw.. Sorry this is so long... Thanks for any input   Logged     The administrator has disabled public write access. #5996 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 11027 Re:Need jetting advice... 2 Years, 7 Months ago   I'd start off with the DJ 180, needle on the third groove and PMS out 3 turns. Check out the Tech Tips section on how to test the main .... http://roadstarclinic.com/content/view/94/96/ Once you have the main set up then you can move to the other circuits. You can leave the duration screw as is. I still have mine at stock setup and don't have any problems unless I get 'twist-wrist' happy. (different strokes .... ) Doc   Logged     My Bike Website   The administrator has disabled public write access. #6025 jackson (User) Fresh Boarder Posts: 4 Re:Need jetting advice... 2 Years, 7 Months ago   Thanks Doc.. Do you happen to remember the needle set up? What order? c-clip, washer, ect... I have been reading so many differant things, all the way from no washers to extra washers and in all kinds of differant orders,, What clip, washer set up should I start with? Thanks again..   Logged     The administrator has disabled public write access. #6033 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 11027 Re:Need jetting advice... 2 Years, 7 Months ago   Yea, it's confusing. From the blunt end (the top) it's: - washer (the spring sits on this) - clip (fits in one of the grooves) - white plastic retainer - silver washer You can fine tune the clip settings by adding an additional washer under the bottom washer or replacing the bottom washer with a thicker one. They come in different colours - silver (same thickness as the groove), purple (1.5 grooves). If you have to add more that two silver then change the clip. Doc<br><br>Post edited by: DocShadow, at: 2006/05/27 09:19   Logged     My Bike Website   The administrator has disabled public write access.

Forum List Technical Corner Jetting

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->