Doc , just wanted to thank you and the team for giving me the courage to rejet my own Carb.Found a few differances in what you were saying and adapted.
You said DJ 180 main,2 1/2 turns everything else stock for a starting point.
The DynoJet Kit for the 1700 does`nt have a 180 main.They go as follows.
165,170,175,190,195,200,210,and aDPJM037 pilot jet,Fuel needle.
DynoJet said 170 or 175 for stage 1,195 or 200 for stage 2 all with the new
pilot jet and PMS at 3 turns,needle groove 4 from the top.With all that I`ve read could have let it con fuse me ,but screw that! .
So started in the middle,DJ190 main jet,installed the DPJM037 pilot jet,set
needle in middle groove,3 turns on PMS.
What a differance I`m doing all my own work from now on!!! .
Power WAS the leap I expected.Took it to 110mph and ran out of room,still more left to go.No hesitation,throttle crisp as Granny Smith Apple and agood Idle.
Took half the time to warm up.Granted won`t know how rich I am till I log afew miles then do the calculations.Holy smoke does she Git.
Thanks and will keep you guys posted.

Glad it worked out.

Sometimes you just gotta do it; jump in with both feet.

Now that you have a starting point you can refine it based on the mileage or other observations.

You need the choke to start it up?

Doc

I choked it to startn it but,thats been My normal proceedure on start up.
I`ll try it with out and see what happpens and let ya know.Thanks

vegasdave wrote:
I choked it to startn it but,thats been My normal proceedure on start up.
I`ll try it with out and see what happpens and let ya know.Thanks

What is your mileage like?

I just put in a DynaJet Kit last night. DJ175, stock main, Needle on 4th clip, spacer, 2 x washer. PMS 2 out. Accel 2 out.

I am waiting for the wife to get home so I can take it out and finish the tank.

JDoza wrote:
vegasdave wrote:
I choked it to startn it but,thats been My normal proceedure on start up.
I`ll try it with out and see what happpens and let ya know.Thanks

What is your mileage like?

I just put in a DynaJet Kit last night. DJ175, stock main, Needle on 4th clip, spacer, 2 x washer. PMS 2 out. Accel 2 out.

I am waiting for the wife to get home so I can take it out and finish the tank.
I`m running DJ190main,DJneedle 3rd clip,stock 37 pilot,PMS at 2 with me alone I
get around 43 to 45 MPG,with Wife and me 39 mpg.I have the tallest windshield Yamaha makes,easy brakets plus bags,plus assorted other acc.I figure were at close to 500lbs loaded for fun Had my bike Dyno`ed,68.3HP and 97.1 FT.lbs of torque.Said my nubers as far at co were right on Anything and anytime here to help