Road Star Clinic Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

TOPIC: Re:Jetting & setup Forum Tools Post New Topic Show latest posts Rules

#79393 George (User) Fresh Boarder Posts: 80 Jetting & setup 8 Months, 2 Weeks ago   Hi I have a 99 road* i am seeking advice on the appropriate jetting & set up. i have just fitted bub chambermaids, & have a Nemisis manifold to fit & a max-air, aircleaner which came with a jet kit, i also bought a knurled mixture screw from max-air, i intend to fit these items on the weekend & would appreciate any input, i do by the way reside in Australia & our gas is 95 octane for regular unleaded, thank you in advance! regards George   Logged     The administrator has disabled public write access. #79413 BigBoyinMS (User) BigBoy. BigBike. Expert Boarder Posts: 483 Re:Jetting & setup 8 Months, 2 Weeks ago   My advice would be to go to the Tech Articles and read up on it there. I'm doing pretty much the same this weekend and all the info I needed was there. Good Luck!   Logged     2006 Midnight. Roland, The Roadie   The administrator has disabled public write access. #79414 Musky (Moderator) Doc took Grams beer Moderator Posts: 13482 Re:Jetting & setup 8 Months, 2 Weeks ago   I think Maxaire comes with Dynojet jets. Right? If so you could try the 175 main. Put the clip in the 5th groove from the blunt end of the needle. If it's the new maxmix PMS set it between 2 and 3 turns out. If it's the old maxmix cut that in half. Leave the pilot jet alone. Do the WOT. If the main is OK put the clip in the 4th groove from the blunt end and tweak the needle and PMS from there. These are just suggestions. Your bike will tell you what it wants.   Logged       The administrator has disabled public write access. #79442 CoachDan (User) I'm Mechanically Inclined, I Screw Up Everything. Gold Boarder Posts: 637 Re:Jetting & setup 8 Months, 2 Weeks ago   Hey George I have the MaxAir on my 1700. Not sure of the brand of jets with kit, but kit came with a 185 and 190 main jets. Mine used the 190, but yours, the 1600 uses the 185. Yours does use the stock main, but mine used the 37.5. You can try the 175 like Musky suggested, you'll probably get better fuel milege. Mine runs great, but my fuel milege sucks.   Logged     CoachDans Bikes   The administrator has disabled public write access.

Forum List Technical Corner Jetting

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->