Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum Technical Corner Technical Discussions
EFI Module Recommendations for 08 Star
Go to bottom Post Reply Favoured: 0
TOPIC: EFI Module Recommendations for 08 Star
#108472
jdwintx (User)
Fresh Boarder
Posts: 39
graphgraph
User Offline Click here to see the profile of this user
EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
OK, this may be for a limited audience but here goes. I'm trying to determine what EFI Module can be used on my 08, so far the choices are pretty limited to PowerCommander III. I was looking for something more along the lines of the ThunderMax or TuneBoy. Am I stuck???? Any thoughts or help would be appreciated.
 
Logged Logged  
  The administrator has disabled public write access.
#108482
lionRstar06 (User)
Fresh Boarder
Posts: 86
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Roseville, CA Birthdate: 1965-08-19
Re:EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
Hey Jdwintx
I think you better hold on with the stuff about the EFI system for roadies. We all don't know much infortation on the 08 system and other stuff . Give it a time and their will be an inforation , but we don't know how long will have the best inforation comes out 08 EFI . WE all know the inforation of 07 and older model . Just bear with the stock for now what you have ok pal . As long your happy to have 08 . EFI is a awesome to have it . I know alot with harley stuff becuz I have been study many diffrent things like motor EFI frame tires rim etc . But for the roadstar I know pretty little of it . I regret not have EFI for my roadies . I should have got harley with EFI frist place But if roadie has build EFI before 06 then I ll be so happy with it . Just to let you know with 02 cents
Bill
 
Logged Logged  
  The administrator has disabled public write access.
#108485
Factoryphoto (User)
Junior Boarder
Posts: 135
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Factoryphoto.com Location: Yuba City CA Birthdate: 1970-12-17
Re:EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
cobra makes one called a f2000r it comes preset to the bike.. Its on cobras website. And just to let you know speedstar makes a pipe for the bike now that has the 02 sensors installed.
Hoss
 
Logged Logged  
 

www.factoryphoto.com
  The administrator has disabled public write access.
#108533
RangerDan (User)
racin the wind, chasin the sun
Expert Boarder
Posts: 461
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Calgary, AB
Re:EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
Another option is the Techlusion TFI... cheaper, allows you pretty much to tune an EFI bike like a carb. Check it out if you want http://techlusion.com/ That's the way I'm thinking of going because you can tune it again as you add/remove things, and.. well you tune it like a carb. Handy. This is the way I'm thinking of going, the downside is I don't think it'll actually take fuel away at certain points on the map so I'm not sure what it'll do to your fuel economy.

Dan
 
Logged Logged  
 


\"When I looked at this thread, I was thinking to myself; I sure hope I get to see an image that will burn itself into my brain and spend the rest of my life trying to repress it. I think I threw up in my mouth a little.\"
  The administrator has disabled public write access.
#108839
jdwintx (User)
Fresh Boarder
Posts: 39
graphgraph
User Offline Click here to see the profile of this user
Re:EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
Thanks guys, I'm still researching and will post what I find out between these and other products.
 
Logged Logged  
  The administrator has disabled public write access.
#108925
slyguy (User)
What happens in the garage stays in the garage.
Platinum Boarder
Posts: 1869
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Arizona
Re:EFI Module Recommendations for 08 Star 3 Years, 9 Months ago  
Factoryphoto wrote:
cobra makes one called a f2000r it comes preset to the bike.. Its on cobras website. And just to let you know speedstar makes a pipe for the bike now that has the 02 sensors installed.
Hoss

http://www.fi2000r.com/page.php?page=64

Its says for V-Star 1300, Raider and the part numbers for the two are different for the O2 version. The R version has it for Warrior, Road/Strato-Liner, V-Star 1300 and Raider.

Did you find a link that has the part # for the R*?
 
Logged Logged  
 
2004 Road Star Silverado (original owner), over 55K mostly trouble-free miles
Patriot Guard Rider, IBA Member, Star Touring & Riding
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Miscellaneous, 5/26/2012
Subject: RoadHog75 you have a private message.
gfolkert: You have a private message from me. Thanks.
RoadHog75 you have a private message.
new topic by:
gfolkert
In: Introductions, 5/26/2012, 14 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/26/2012
tarcon: Welcome from Northeast Pennsylvania Hello from the Region
15 posts, last by:
tarcon
In: Electrical/Electronics, 5/25/2012, 16 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...
Latest reply, 5/26/2012
FF56: Justed posted pics in the thread My project under Bike talk.Rear tail/brake light lens
17 posts, last by:
FF56
In: Rides, Meets, Events, 3/1/2012, 133 replies
Subject: Memorial Day Weekend Gathering Arundel Maine
drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ...
Latest reply, 5/26/2012
Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine
134 posts, last by:
Questcap
In: Miscellaneous, 5/24/2012, 40 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...
Latest reply, 5/26/2012
Bronson: Ozarkpreacher , yes it's the Rifle cruise tour , I really like it !!Opinion about studs
41 posts, last by:
Bronson
In: Tech Tips, 5/26/2012
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...
Engine teardown video
new topic by:
gearjammer
In: Bolt Ons, 5/26/2012, 12 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/26/2012
greyphart: We have a winner! Good idea Paul.Flag mounts for 6"x9"
13 posts, last by:
greyphart
In: Bike Talk, 5/26/2012, 4 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/26/2012
fireman922: Flask of liqueur, bottle of pills and a pocket full of singles. And a change of underwear.Road trip tool kit
5 posts, last by:
fireman922
In: Bike Talk, 5/8/2012, 34 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...
Latest reply, 5/26/2012
FF56: Front lightsMy Project
35 posts, last by:
FF56
In: Maintenance, 5/25/2012, 14 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!
Latest reply, 5/26/2012
FF56: Here's the pic Brake pads
15 posts, last by:
FF56
In: Miscellaneous, 4/19/2012, 3 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/26/2012
brown91redcam: To much drama not enough bike stuff,been watching it but not impressedHey Stevie...
4 posts, last by:
brown91redcam
In: Miscellaneous, 5/26/2012, 9 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
tibadoe: That just blows :dry:Let the summer begin...(not quite)
10 posts, last by:
tibadoe
In: Electrical/Electronics, 5/26/2012, 8 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/26/2012
brown91redcam: If they are only single intesity leds you will only be able to use the turn signal circuit and disconnect ...So much for simple
9 posts, last by:
brown91redcam
In: Bolt Ons, 5/25/2012, 24 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...
Latest reply, 5/26/2012
Erbman02: It fits. Grumpy (Jay) from rsr forum has it on his 1700. been running it for a while.Front Pulley Question - XV1600 vs XV1700
25 posts, last by:
Erbman02
In: Bike Talk, 5/26/2012, 12 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
BC1955: Yes. Takes bump much better and bike seems more stable. I did not have to adjust the shock pre-load. ...Changing the shock spring
13 posts, last by:
BC1955
In: Rides, Meets, Events, 4/9/2012, 229 replies
Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ...
Latest reply, 5/26/2012
Darn: Tilted Kilt... bring the sunglasses :innocent: :whistle: :evil:B)HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
230 posts, last by:
Darn
In: Bike Talk, 5/26/2012, 1 reply
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...
Latest reply, 5/26/2012
USAFRETIRED: One clamp mount on upper part of upright tube One clamp mount on bottom frame down by floorboard One ...Side Car mounting
2 posts, last by:
USAFRETIRED
In: Rides, Meets, Events, 3/16/2012, 98 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/26/2012
greyphart: I forgot they got menu's. :whistle:Central M&G, 2012 June 29,30, and July 1
99 posts, last by:
greyphart
In: Introductions, 5/24/2012, 34 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
Planet42: :welcome: from NY Mine's an '09 Silverado SHello from Kentucky
35 posts, last by:
Planet42
In: Bike Talk, 5/25/2012, 9 replies
Subject: Road Star Versus Warrior
Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars?
Latest reply, 5/26/2012
MidStar07: The V-rod of Raodstars? Yeah, that's a pretty good description. I've ridden one and I liked it a lot. ...Road Star Versus Warrior
10 posts, last by:
MidStar07
In: Bolt Ons, 5/21/2012, 45 replies
Subject: Freedom Duals Are Ready!
moreland4: Well Ray at AAA Exhaust emailed me recently to inform me that the NEW Freedom True-Duals for the Road Star are ready for order/delivery. It's now decision time for me. Do I like the new 4" cans or would ...
Latest reply, 5/26/2012
smokescreens: they are brand spanking new. moreland ordered them and should have them in about 2 weeks. and he ...Freedom Duals Are Ready!
46 posts, last by:
smokescreens
In: Maintenance, 5/25/2012, 11 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
espressodude: It had been serviced at the dealership, I don't know what they had in it. All I know it that it had a ...I messed up the Barnett conversion some how
12 posts, last by:
espressodude
In: Bike Talk, 5/21/2012, 39 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/26/2012
Georgeherrin: Thanks Darn, I just ordered my Austone tire. Now to find Dyna beads thanks so much.I have gone to the Darkside...
40 posts, last by:
Georgeherrin
In: Bolt Ons, 5/24/2012, 12 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James
Latest reply, 5/26/2012
Plumbwader: Pull only here. Seems like i fight the spring a little more now but i like the way it cleans it up without ...Do I really need push & pull cables?
13 posts, last by:
Plumbwader
In: Miscellaneous, 5/26/2012, 2 replies
Subject: WTB Fairing
Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc.
Latest reply, 5/26/2012
Just Dave: Yeah, I know they are not really that expensive but cheaper is always better if you can get a clean used ...WTB Fairing
3 posts, last by:
Just Dave
In: Introductions, 5/25/2012, 30 replies
Subject: Hello to all
texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ...
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello to all
31 posts, last by:
About_Time
In: Introductions, 5/24/2012, 35 replies
Subject: Long time fan, finally a member!!
RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioLong time fan, finally a member!!
36 posts, last by:
About_Time
In: Bike Talk, 5/26/2012, 6 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/26/2012
mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated.
7 posts, last by:
mkayx
In: Tech Tips, 5/26/2012, 2 replies
Subject: fouled plugs
Fooyun: Guys Can a dirty air filter cause the plugs to foul out at low speeds 0 to 30?
Latest reply, 5/26/2012
scottw: . ========================================================================================= It ...fouled plugs
3 posts, last by:
scottw
In: Maintenance, 5/15/2012, 17 replies
Subject: Recommended bike stand that won't break budget??
Raindog: Hey fellas...question... Getting ready to change the rear brake pads for the first time (for me) on my '05 Roadstar Silverado, and I did some forum research to make sure I was armed with all of the ...
Latest reply, 5/26/2012
donelam304: my wife would soooo kick my ass. lol....Recommended bike stand that won't break budget??
18 posts, last by:
donelam304




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.