Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum Technical Corner Technical Discussions
Re:Clutch Re-build, with Clifford's help! (1 viewing) (1) Guest
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Clutch Re-build, with Clifford's help!
#207592
DKLAZ (User)
of COURSE I need a second bike dear!!!
Expert Boarder
Posts: 493
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Mesa, AZ Birthdate: 1969-08-18
Clutch Re-build, with Clifford's help! 2 Years, 7 Months ago  
Hey guys...
Just had to jump on here and give props where due! I piosted a couple times last month looking for advice on rebuilding my clutch on my '02 R*. It turns out that all I really need to do is replace my pressure plate and springs (according to some good advice I got right here).

Clifford offered to get me the parts at a significant discount, and they are scheduled to arrive tomorrow. I am EXCITED!!!

More than anything I have to extend my thanks to Clifford for getting the parts for me, and to HardOneToGet for the advice on the replace/rebuild.

What a great place to hang out! I'll be following the Tech Article VERY closely so that I don't mess it up, and I'll post the results when I get it done. I am open to advice from anyone that's done it recently, so I know of any snags that I might run into.

This place is THE BEST!!!

DKLAZ
 
Logged Logged  
 
  The administrator has disabled public write access.
#207613
cartersta (User)
jackncoke summer coolant, winter antifreeze
Platinum Boarder
Posts: 1536
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: screamer alabama Birthdate: 1956-10-04
Re:Clutch Re-build, with Clifford's help! 2 Years, 7 Months ago  
good luck dk, keith
 
Logged Logged  
 
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Bike Talk, 2/11/2012, 1 reply
Subject: Anyone familiar with this drivers backrest?
Doc_V: Saw this on Amazon for $145. Anyone know anything about them? On ...
Latest reply, 2/11/2012
pigpen: This is a great design for the Roadie. It's design is taken from the bak-up backrest design. this design ...Anyone familiar with this drivers backrest?
2 posts, last by:
pigpen
In: Bike Talk, 2/5/2012, 9 replies
Subject: WTB: Landon's Grab Bar
major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ...
Latest reply, 2/11/2012
major443: Thanks for the info, hopefully he'll see this post if he's still making them, cheers.....Major WTB: Landon's Grab Bar
10 posts, last by:
major443
In: Introductions, 1/30/2012, 33 replies
Subject: My First R*
LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ...
Latest reply, 2/11/2012
Ricohoc: My First R*
34 posts, last by:
Ricohoc
In: Bike Talk, 2/11/2012
Subject: new apes coming
tristate: just ordered new pc apes, after alot of looking found these guys, ROAD-6 customs. All good reveiws, all "good ol boys" doing the work...
new apes coming
new topic by:
tristate
In: Electrical/Electronics, 2/11/2012, 2 replies
Subject: new key switch help
250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ...
Latest reply, 2/11/2012
250WIDE: so i guess i put the red to b- battery. then the brown/blue wire to a-assesoy then just connect the ...new key switch help
3 posts, last by:
250WIDE
In: Bike Talk, 2/11/2012, 6 replies
Subject: Solo Seats- Narrowing down the list, want opinions
Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ...
Latest reply, 2/11/2012
rphazen: Boy,......didn't see that one coming!!! :whistle: :PSolo Seats- Narrowing down the list, want opinions
7 posts, last by:
rphazen
In: Bike Talk, 2/11/2012, 4 replies
Subject: This tachometer?
dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ...
Latest reply, 2/11/2012
dingodango88: Ahh heck Ill just buy the second one then! I dont mind if it is off set to the right a little.This tachometer?
5 posts, last by:
dingodango88
In: Body/Frame, 2/11/2012, 1 reply
Subject: Stock heel/toe shifter…..
ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ...
Latest reply, 2/11/2012
BigCountry: RG: you're not alone! I had a Honda shadow with cobra floorboards but because I have pontoons for feet, ...Stock heel/toe shifter…..
2 posts, last by:
BigCountry
In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: New family member
greyphart: Names Reggie. 4 1/2 year old Golden ...
Latest reply, 2/11/2012
tarcon: I have a Doberman and an Irish Setter. the Irish Setter goes balistic when I just go to get on my bike. ...New family member
4 posts, last by:
tarcon
In: Pics of My Ride, 6/27/2011, 51 replies
Subject: Posting Pics Step By Step!!!
CPORetired: I know alot of people are having trouble with the posting of pics so since I am bored to death today I thought I would try to help. First the programs I use are all available online and do NOT cost anything. ...
Latest reply, 2/11/2012
HotRodRStar: Can anyone tell me how to re-size my Sig pic? I made it to the file and pixel size required by RSC but ...Posting Pics Step By Step!!!
52 posts, last by:
HotRodRStar
In: Bolt Ons, 2/11/2012, 1 reply
Subject: Decals
moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. (some Yamaha ones on the bottom of page ...
Latest reply, 2/11/2012
Tug: Here are some more http://home.comcast.net/~tpbiker1/Motorcycle.html http://www.motorcycledecalgraphics.com/ http://www.jamesdeancreations.com/yamaha_decals.htmDecals
2 posts, last by:
Tug
In: Bike Talk, 2/6/2012, 8 replies
Subject: lost drive... where to buy?
masterhermit: yeah... ok i found the cause...... thanks to RSC members, drive pulley got no teeth.....:( i posted a pic in the thread in tech. now the problem i have is finding a replacement, according to Yamaha and ...
Latest reply, 2/11/2012
HotRodRStar: I just found a pulley that recently came up on Ebay if you are still in the market ... Rodlost drive... where to buy?
9 posts, last by:
HotRodRStar
In: Maintenance, 2/10/2012, 10 replies
Subject: Throtle return rate
espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ...
Latest reply, 2/11/2012
espressodude: Thanks guys I adjusted the cable at the bars and works good now. I think my carb is leaking but it ...Throtle return rate
11 posts, last by:
espressodude
In: Non Motorcycle Topics, 2/10/2012, 5 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...
Latest reply, 2/11/2012
Big Dawg: Don't why you're worried about the HD boots, John. I know that there are some here that are (almost ...Got my new boots!
6 posts, last by:
Big Dawg
In: Bolt Ons, 2/10/2012, 4 replies
Subject: Floorboard Extensions
Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob
Latest reply, 2/11/2012
chrisxv1600al: Rob, Thats exactly what I was thinking when I made my spacers. My bike has the Kuryakyn twin Velocity ...Floorboard Extensions
5 posts, last by:
chrisxv1600al
In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: Lets go flying
saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152
Latest reply, 2/11/2012
Tug: well... hold on to the bike and not the windshield :laugh: :laugh: :laugh:Lets go flying
4 posts, last by:
Tug
In: Bike Talk, 2/10/2012, 23 replies
Subject: this road star is to cool!!!
smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow
Latest reply, 2/11/2012
Big Dawg: Very nice ride! BDthis road star is to cool!!!
24 posts, last by:
Big Dawg
In: Bolt Ons, 2/9/2012, 9 replies
Subject: Front wheel ring
signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers.
Latest reply, 2/11/2012
chico: We like to call them "pie plates", and Ultrastarmakes them and does a fantastic job on them ! I have ...Front wheel ring
10 posts, last by:
chico
In: Non Motorcycle Topics, 2/11/2012, 2 replies
Subject: Growing old, kicking and screaming
mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ...
Latest reply, 2/11/2012
Tug: :laugh: :laugh: :laugh:Growing old, kicking and screaming
3 posts, last by:
Tug
In: Bike Talk, 2/11/2012, 1 reply
Subject: rear suspension adjustment for 2004 midnight star
sundance: I see the adjustment for the rear suspension in the manual, I have just started riding 2 up and need more suspension in the rear. It seems to bottom out sooner. Which way do I need to make the adjustment ...
Latest reply, 2/11/2012
Erbman02: here ya go http://dl.dropbox.com/u/127455/RoadStar_User_Manual.pdf pg 3-15 and 3-16 note where ...rear suspension adjustment for 2004 midnight star
2 posts, last by:
Erbman02
In: Electrical/Electronics, 2/11/2012, 4 replies
Subject: Extending wires for inside the bars...
goodnamesaretook: Anyone out there have any idea how much length should need to be added to the stock wiring to be able to run the wires inside a set of 16" apes with stock risers. I've got the bars on order and would ...
Latest reply, 2/11/2012
nightrider: About a foot, as mentioned above. Just remember to stagger your splices.B)Extending wires for inside the bars...
5 posts, last by:
nightrider
In: Maintenance, 2/10/2012, 20 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...
Latest reply, 2/11/2012
BEAMS123: Pita=breezeIgnition switch and battery ????
21 posts, last by:
BEAMS123
In: Maintenance, 2/11/2012, 9 replies
Subject: What should I do?
azbto: Ok, a little long but need to lay the ground work. Picked up an '05 1700 Midnight from a small dealership a couple months ago, only has 1500 miles on her. Well first thing I noticed was the tires were ...
Latest reply, 2/11/2012
davej: If you still have the stock airbox you might want to think about doing a poormans Bak. and use the jetting ...What should I do?
10 posts, last by:
davej
In: Bike Talk, 2/11/2012, 1 reply
Subject: Greate Website
NorThai: Have a look... :)
Latest reply, 2/11/2012
XXX Custom Cycles: Greate Website
2 posts, last by:
XXX Custom Cycles
In: Bike Talk, 2/10/2012, 9 replies
Subject: Waht Tires do you ride???
ear3:
Latest reply, 2/11/2012
MikelJay: Metzler ME880's front and rear Like ROADGRABBER said, made a world of difference in the handling of ...Waht Tires do you ride???
10 posts, last by:
MikelJay
In: Miscellaneous, 2/10/2012, 3 replies
Subject: selling my 07 cast wheels...help
ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market?
Latest reply, 2/11/2012
stanag: I too am in search of wheels. send a photo and lets talk price Stanselling my 07 cast wheels...help
4 posts, last by:
stanag
In: Maintenance, 2/10/2012, 10 replies
Subject: Lithium Soap?
About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ...
Latest reply, 2/11/2012
Erbman02: Lithium soap? I used it one time, but could never get that greasy feeling off my body no matter how ...Lithium Soap?
11 posts, last by:
Erbman02
In: Electrical/Electronics, 2/10/2012, 5 replies
Subject: Led turn signals
fetasigma: I have an led taillight and was thinking of putting in led turn signals as well. Wich is better putting in load resistors or just changing out the flasher relay for one that is led compatible. Also is ...
Latest reply, 2/11/2012
texasscott1: They should unless someone has changed something. You can test the self cancel function by turning ...Led turn signals
6 posts, last by:
texasscott1
In: Bike Talk, 2/10/2012, 7 replies
Subject: Fairing and tour trunk ideas
Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom
Latest reply, 2/11/2012
davej: I went with the HD fairing with no regrets. Like was already said you can install tunes and gauges and ...Fairing and tour trunk ideas
8 posts, last by:
davej
In: Electrical/Electronics, 2/1/2012, 11 replies
Subject: starter problems
Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear
Latest reply, 2/11/2012
rphazen: Now, with what you've saved on fixing it your self you are entitled to spend that on CHROME!!! :woohoo:starter problems
12 posts, last by:
rphazen




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.