I wire-tied the toggle switch under the RH part of the seat. I can reach it, but you can't see it. I don't think I've used it in a while. Just there as a backup. No need to drill a hole or get elaborate.

What you guys might want to consider are the following.

1. Air Pressure Sensor. (120lbs $20.00 on Ebay). Tricky, correct me if I'm wrong. But, 150lbs is the max, correct?
.
You can wire it to the blue wire that controls the rear tail light. If you turn the key on, the sensor kicks on the compressor and brings it back up to ride height @ 120lbs. It'll only kick on at or < 90lbs.

2. If you're a little more creative, you can add a 2CH-4CH remote control ($20.00 on Ebay). One button kicks the solenoid to drain the system and bring it to the ground at 100ft.. The other button kicks on the air pressure sensor to bring it back up on command.


Also, you might want to consider a real brass tee. Tricky, we love ya man. But, those push in connectors are ok as long as you don't have to pull it apart. I ruined a couple just getting the system the way I wanted it.


Do it once
Do it right



Rich