Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Clutch setup???
#21809
dbranco (Visitor)
Posts: 0
graphgraph
User Offline Click here to see the profile of this user
Birthdate:
Clutch setup??? 5 Years, 1 Month ago  
I have 45,000 miles on the bike and the clutch is slipping like crazy..
I spent a couple of hours reading thru previous clutch threads.

Now which one is better the retrofit Barnnet Plate with 6 springs and stock fibers and stock plates or.... I am 280 and yes do replace the rear wheel every year. So the clutch takes lots of punishment. I also do not want a much heavier clutch pull. I need to order parts this week so let me know what you guys think.

Dan
 
Logged Logged  
  The administrator has disabled public write access.
#21810
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17615
graph
User Offline Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Clutch setup??? 5 Years, 1 Month ago  
The Barnett springs with the OEM plates are the best. Yamaha plates are better than most aftermarket brands but the stock spring sucks and that the cause of most slipping issues.

The Barnett springs will give you a much heavier pull than the stock. If you want something in-between the you can install the Warrior or Speedstar spring.

If you're 'rough' on the clutch then go with the Barnett. The Barnett coil spring setup is better than the Yamaha plate spring.

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#21811
dbranco (Visitor)
Posts: 0
graphgraph
User Offline Click here to see the profile of this user
Birthdate:
Re:Clutch setup??? 5 Years, 1 Month ago  
Between the warrior and speedstar which would you rec?

So the spring for the warrior or speedstar will fit with no modifications?
Should I order the same year? I went to the dealer last week for the parts and they wanted around 300 for plates, fibers and new springs that nuts. Do you have any where online where I can buy the kit instead of piece mealing it?

Thanks
You guys have been a gigantic help...
 
Logged Logged  
  The administrator has disabled public write access.
#21832
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17615
graph
User Offline Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Clutch setup??? 5 Years, 1 Month ago  
dbranco wrote:
Between the warrior and speedstar which would you rec?

Never had both in hand so I don't know the difference. There are two different Speedstar springs and I don't know which one is equivalent to the Warrior.

So the spring for the warrior or speedstar will fit with no modifications? Should I order the same year?

Yes. Yes.

I went to the dealer last week for the parts and they wanted around 300 for plates, fibers and new springs that nuts. Do you have any where online where I can buy the kit instead of piece mealing it?

There is no kit. You just buy the parts you need.

Check here for parts .... http://www.hellrisercustoms.com/selector.php?group=1&category=Performance&subcat=Clutch+kit&title=Performance%20products%20for%20RoadStar
http://www.phatperformanceparts.com/merchant2/merchant.mvc
http://www.bulldogscustomcycle.com/servlet/the-Road-Star/Categories

You will also need a gasket for the clutch housing.

Doc
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#21863
Curt (Moderator)
Never to old to ride!
Moderator
Posts: 12504
graphgraph
User Online Now Click here to see the profile of this user
Gender: Male BlackIce
Re:Clutch setup??? 5 Years, 1 Month ago  
Here is the best place I have found for OEM parts. They are a lot cheaper than any dealer I have found.

http://www.powerpartsplus.com/pages/parts/viewbybrand/2/yamaha.aspx
 
Logged Logged  
 
My Site

Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Bike Talk, 5/26/2012, 11 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
Stevie: Big difference?Changing the shock spring
12 posts, last by:
Stevie
In: Bolt Ons, 5/26/2012, 7 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/26/2012
Rev.: I am going to fab mine up next week for my 6"x9" flags also for PGR going to mount then off the license ...Flag mounts for 6"x9"
8 posts, last by:
Rev.
In: Rides, Meets, Events, 4/9/2012, 229 replies
Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ...
Latest reply, 5/26/2012
Darn: Tilted Kilt... bring the sunglasses :innocent: :whistle: :evil:B)HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
230 posts, last by:
Darn
In: Miscellaneous, 4/19/2012, 1 reply
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/26/2012
Stevie: hey man! sorry I just saw this guess by now you already saw the show lol laffing devils mc? I ...Hey Stevie...
2 posts, last by:
Stevie
In: Introductions, 5/26/2012, 12 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/26/2012
roadiemort: :welcome: Hello from the Region
13 posts, last by:
roadiemort
In: Bike Talk, 5/26/2012, 1 reply
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...
Latest reply, 5/26/2012
USAFRETIRED: One clamp mount on upper part of upright tube One clamp mount on bottom frame down by floorboard One ...Side Car mounting
2 posts, last by:
USAFRETIRED
In: Rides, Meets, Events, 3/16/2012, 98 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/26/2012
greyphart: I forgot they got menu's. :whistle:Central M&G, 2012 June 29,30, and July 1
99 posts, last by:
greyphart
In: Bike Talk, 5/26/2012, 2 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/26/2012
greyphart: Empty credit card and a charged cell phone. Road trip tool kit
3 posts, last by:
greyphart
In: Introductions, 5/24/2012, 34 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
Planet42: :welcome: from NY Mine's an '09 Silverado SHello from Kentucky
35 posts, last by:
Planet42
In: Bike Talk, 5/25/2012, 9 replies
Subject: Road Star Versus Warrior
Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars?
Latest reply, 5/26/2012
MidStar07: The V-rod of Raodstars? Yeah, that's a pretty good description. I've ridden one and I liked it a lot. ...Road Star Versus Warrior
10 posts, last by:
MidStar07
In: Bolt Ons, 5/21/2012, 45 replies
Subject: Freedom Duals Are Ready!
moreland4: Well Ray at AAA Exhaust emailed me recently to inform me that the NEW Freedom True-Duals for the Road Star are ready for order/delivery. It's now decision time for me. Do I like the new 4" cans or would ...
Latest reply, 5/26/2012
smokescreens: they are brand spanking new. moreland ordered them and should have them in about 2 weeks. and he ...Freedom Duals Are Ready!
46 posts, last by:
smokescreens
In: Maintenance, 5/25/2012, 11 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
espressodude: It had been serviced at the dealership, I don't know what they had in it. All I know it that it had a ...I messed up the Barnett conversion some how
12 posts, last by:
espressodude
In: Bike Talk, 5/21/2012, 39 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/26/2012
Georgeherrin: Thanks Darn, I just ordered my Austone tire. Now to find Dyna beads thanks so much.I have gone to the Darkside...
40 posts, last by:
Georgeherrin
In: Bolt Ons, 5/24/2012, 12 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James
Latest reply, 5/26/2012
Plumbwader: Pull only here. Seems like i fight the spring a little more now but i like the way it cleans it up without ...Do I really need push & pull cables?
13 posts, last by:
Plumbwader
In: Miscellaneous, 5/26/2012, 2 replies
Subject: WTB Fairing
Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc.
Latest reply, 5/26/2012
Just Dave: Yeah, I know they are not really that expensive but cheaper is always better if you can get a clean used ...WTB Fairing
3 posts, last by:
Just Dave
In: Introductions, 5/25/2012, 30 replies
Subject: Hello to all
texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ...
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello to all
31 posts, last by:
About_Time
In: Introductions, 5/24/2012, 35 replies
Subject: Long time fan, finally a member!!
RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioLong time fan, finally a member!!
36 posts, last by:
About_Time
In: Bike Talk, 5/26/2012, 6 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/26/2012
mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated.
7 posts, last by:
mkayx
In: Tech Tips, 5/26/2012, 2 replies
Subject: fouled plugs
Fooyun: Guys Can a dirty air filter cause the plugs to foul out at low speeds 0 to 30?
Latest reply, 5/26/2012
scottw: . ========================================================================================= It ...fouled plugs
3 posts, last by:
scottw
In: Maintenance, 5/15/2012, 17 replies
Subject: Recommended bike stand that won't break budget??
Raindog: Hey fellas...question... Getting ready to change the rear brake pads for the first time (for me) on my '05 Roadstar Silverado, and I did some forum research to make sure I was armed with all of the ...
Latest reply, 5/26/2012
donelam304: my wife would soooo kick my ass. lol....Recommended bike stand that won't break budget??
18 posts, last by:
donelam304
In: Non Motorcycle Topics, 5/25/2012, 21 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/26/2012
Stevie: LOL that is so true When I was buying my last one I called my insurance guy and told him I bought ...I'm Torn
22 posts, last by:
Stevie
In: Electrical/Electronics, 5/26/2012, 7 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/26/2012
bencadenbach: Well I just tried reversing the wires on the one that was working and it did not work at all with ...So much for simple
8 posts, last by:
bencadenbach
In: Miscellaneous, 5/25/2012, 6 replies
Subject: STOP!!! Part II
Erbman02: I figured what the heck!, lets see how much more I can stir up, really gets the juices going. So any way, drum roll please!!!...........................................................................................................................................................................................................................................................................................................................................................>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PART ...
Latest reply, 5/26/2012
huskerbob: http://youtu.be/KCSA7kKNu2YSTOP!!! Part II
7 posts, last by:
huskerbob
In: Miscellaneous, 5/26/2012, 6 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
Roger7886: Thinking he should shave some off the bill for loss of companionship, inconvenience, extra cost of ...Let the summer begin...(not quite)
7 posts, last by:
Roger7886
In: Maintenance, 5/26/2012, 21 replies
Subject: So I changed my oil... durrr
GNR10: ... went with Mobil 1 V-Twin stuff. Drained, new filter, added oil, went to start, not happening. Noticed the neg bat terminal was loose, tightened, tried again, nothing. I feel like a tool changing ...
Latest reply, 5/26/2012
Roger7886: Does your wife talk to my wife??:dry: :blink: :laugh: Probably... I like it most of the time, ...So I changed my oil... durrr
22 posts, last by:
Roger7886
In: Bolt Ons, 5/25/2012, 23 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...
Latest reply, 5/26/2012
Vic1: Curt: The teeth don't mesh properly as the 1600 belt rolls over the 1700 front pulley. Sometimes, ...Front Pulley Question - XV1600 vs XV1700
24 posts, last by:
Vic1
In: Tech Tips, 5/26/2012, 8 replies
Subject: Risers for Reckless Fairings
donelam304: Does anyone have a list of parts numbers for the venture ones. I have an 08 R* and need to get some risers for mine before i put my Reckless on. And if y'all know of a good place to get them from. Please ...
Latest reply, 5/26/2012
signal20k9: I'm sure those would fit. Others have said the Barons DT risers will work but they're exspensive. For ...Risers for Reckless Fairings
9 posts, last by:
signal20k9
In: Bolt Ons, 5/25/2012, 21 replies
Subject: if i was to sell my duals whats a fair price???
smokescreens: freedom performance 3.5" cans with black tips. overall in good shape but as anyone with freedom dual will tell youyour guna drag them in tiht turns so the right pipe has a drag mark on it (but you only ...
Latest reply, 5/26/2012
saab9k: Anything is only worth what someone are willing to pay. Guide in the real world; New price today, ...if i was to sell my duals whats a fair price???
22 posts, last by:
saab9k
In: Technical Discussions, 5/19/2012, 13 replies
Subject: air filter housing
massagemick@yahoo.com: Ok, I'm sure I'll the prize for the stupid question of the week....but how does the air filter housing come off? I've searched the forum, and I looked in the service manual.....it seems as if all I need ...
Latest reply, 5/26/2012
bthomas: That will prolly work if not I have the one that came off my pony its got holes drilled in it ...air filter housing
14 posts, last by:
bthomas
In: Rides, Meets, Events, 4/25/2012, 41 replies
Subject: TEE SHIRT ORDER FORM 2012 CENTRAL M&G
fastjohnny: I atached the Tee Shirt order form for the M&G for 2012. All the tee shirts are black just like last year. The men's are pocket tees and the women's are not. You can also order rockers on the same form. If ...
Latest reply, 5/26/2012
Deedot: I'm coming, and my check's going in the mail today! B)TEE SHIRT ORDER FORM 2012 CENTRAL M&G
42 posts, last by:
Deedot




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.