I have yet to find a supplier, where do you get these intakes? Got an 01 RS. Thanks Jason.

Here's the fella that makes them http://forums.delphiforums.com/1602/messages?msg=133748.1.

Don't know if you go to the RSR's forum but that's where he can be found. I highly recommend you sign up if you don't belong there. Lots of good info there.

Ya I have signed up there, just never found it I guess. Thanks for the link. Jason.

He also sells them on e-bay .......

http://cgi.ebay.ca/NEMESIS-intake-manifold-for-99-03-Road-Star-NEW_W0QQitemZ190119841470QQihZ009QQcategoryZ35597QQrdZ1QQcmdZViewItem

Doc

Being your talking about Nemesis were can I find there coils

Here the post that discusses Nemesis .....

http://roadstarclinic.com/component/option,com_simpleboard/Itemid,/func,view/catid,49/id,26050/#26050


Doc

http://tidyville.roadstarclinic.com/dkcoatings1.html

OOPS. Guess I shoulda looked. You have plenty of links already Oh well, now you have another. <br><br>Post edited by: Musky, at: 2007/06/05 19:09

Nemesis' performance manifolds, coils and plug wires may be found by inquiring at DK Powdercoating on the web, or by checking the posts over on the RSR forum. Bear in mind that the Nemesis manifold extends out further than the stock manifold by about an inch, so your airkit is going to stick out further.

You may also want to check out Ben Herr's Chariot manifolds on the RSR forum. Ben's manifolds are available in Standard and Extended length. The Standard manifold sticks out no further than the stock manifold. The Extended model sticks out about the same as the Nemesis. These manifolds are being forged as we speak. 50 manifolds are supposed to be ready by the end of June, with another 50 being made available in July, at Star Days in Tennessee!

Good luck!<br><br>Post edited by: 06MidnightStar, at: 2007/06/06 12:45

JK

As far as I know you should have no problem getting a Nemisis for your 01. It's the manifolds for the 1700's that aren't ready yet.

Musky:

I believe that the available 99-03 Nemesis manifolds are of the old design stock. One of the reasons that Nemesis re-designed both versions (99-03 and 04-up) was to tighten the tolerances around the bolt holes.

If that's not right, please let me know and I'll edit my post. Unfortunately, I can't get there from here (employer network blocks &quot;forums&quot.

Thanks, Musky.
Ray