Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: AIS plug whistle
#4158
chevmec (User)
Fresh Boarder
Posts: 5
graphgraph
User Offline Click here to see the profile of this user
AIS plug whistle 6 Years, 4 Months ago  
After removing my AIS system and installing the two AIS plugs, a whistle noise is heard when decelerating. I belive I have seen this complaint before on a forum. Just curious if anyone might have a fix for this problem.
My bike is a 00 Roadstar with a Vance and Hines 2 into 1, Kurk air induction and the carb is jetted, also the AIS plugs were bought from NOPORK.com.
Any help is appreciated.
 
Logged Logged  
  The administrator has disabled public write access.
#4159
Big Al (User)
Junior Boarder
Posts: 129
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Miami Birthdate: 1959-12-09
Re:AIS plug whistle 6 Years, 4 Months ago  
My ride is also a 2000 but my ais plugs are Barons. Did you seat them all the way? I have not experienced any noise from mine since. The plugs are a friction fit, try to drive them in some more if you think that they did not seat completely.
 
Logged Logged  
 
Keep on ridin, Semper Fi
  The administrator has disabled public write access.
#4169
muffandjohn (User)
Fresh Boarder
Posts: 6
graphgraph
User Offline Click here to see the profile of this user
Re:AIS plug whistle 6 Years, 4 Months ago  
I used two small block chevy oil plugs,the ones that are in the back of the block.Get them at any auto parts store cheap.I have had them in for two years,no promblems.Hope this helps.
muffandjohn
 
Logged Logged  
  The administrator has disabled public write access.
#4257
jcp (User)
Fresh Boarder
Posts: 10
graphgraph
User Offline Click here to see the profile of this user
Re:AIS plug whistle 6 Years, 3 Months ago  
SemperFi
What brand of exhaust pipes on your bike?
JCP
 
Logged Logged  
  The administrator has disabled public write access.
#4258
Big Al (User)
Junior Boarder
Posts: 129
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Miami Birthdate: 1959-12-09
Re:AIS plug whistle 6 Years, 3 Months ago  
Bub Stubbies.
 
Logged Logged  
 
Keep on ridin, Semper Fi
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Bolt Ons, 5/26/2012, 16 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/26/2012
ozarkpreacher: If you have a hard bags or a trunk these can be adapted to work. They are made to clip over a car window ...Flag mounts for 6"x9"
17 posts, last by:
ozarkpreacher
In: Non Motorcycle Topics, 5/26/2012, 1 reply
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served.
Latest reply, 5/26/2012
Stevie: thank you too... for all you doThank you, all who served.
2 posts, last by:
Stevie
In: Tech Tips, 5/26/2012, 2 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...
Latest reply, 5/26/2012
Blackroadie: Engine teardown video
3 posts, last by:
Blackroadie
In: Bike Talk, 5/21/2012, 40 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/26/2012
samw: Welcome to the clinic! Don't feel bad, I ride to work about everyday too and I blew through a Shinko ...I have gone to the Darkside...
41 posts, last by:
samw
In: Non Motorcycle Topics, 5/25/2012, 22 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/26/2012
smokeymtnbill: Your Ins man sounds like a smart feller;) Me not so smart I guess, have owned and sold:silly: to many ...I'm Torn
23 posts, last by:
smokeymtnbill
In: Miscellaneous, 5/24/2012, 41 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...
Latest reply, 5/26/2012
ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs
42 posts, last by:
ozarkpreacher
In: Introductions, 5/26/2012, 15 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/26/2012
ozarkpreacher: :welcome:Hello from the Region
16 posts, last by:
ozarkpreacher
In: Miscellaneous, 5/26/2012
Subject: RoadHog75 you have a private message.
gfolkert: You have a private message from me. Thanks.
RoadHog75 you have a private message.
new topic by:
gfolkert
In: Electrical/Electronics, 5/25/2012, 16 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...
Latest reply, 5/26/2012
FF56: Justed posted pics in the thread My project under Bike talk.Rear tail/brake light lens
17 posts, last by:
FF56
In: Rides, Meets, Events, 3/1/2012, 133 replies
Subject: Memorial Day Weekend Gathering Arundel Maine
drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ...
Latest reply, 5/26/2012
Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine
134 posts, last by:
Questcap
In: Bike Talk, 5/26/2012, 4 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/26/2012
fireman922: Flask of liqueur, bottle of pills and a pocket full of singles. And a change of underwear.Road trip tool kit
5 posts, last by:
fireman922
In: Bike Talk, 5/8/2012, 34 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...
Latest reply, 5/26/2012
FF56: Front lightsMy Project
35 posts, last by:
FF56
In: Maintenance, 5/25/2012, 14 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!
Latest reply, 5/26/2012
FF56: Here's the pic Brake pads
15 posts, last by:
FF56
In: Miscellaneous, 4/19/2012, 3 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/26/2012
brown91redcam: To much drama not enough bike stuff,been watching it but not impressedHey Stevie...
4 posts, last by:
brown91redcam
In: Miscellaneous, 5/26/2012, 9 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
tibadoe: That just blows :dry:Let the summer begin...(not quite)
10 posts, last by:
tibadoe
In: Electrical/Electronics, 5/26/2012, 8 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/26/2012
brown91redcam: If they are only single intesity leds you will only be able to use the turn signal circuit and disconnect ...So much for simple
9 posts, last by:
brown91redcam
In: Bolt Ons, 5/25/2012, 24 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...
Latest reply, 5/26/2012
Erbman02: It fits. Grumpy (Jay) from rsr forum has it on his 1700. been running it for a while.Front Pulley Question - XV1600 vs XV1700
25 posts, last by:
Erbman02
In: Bike Talk, 5/26/2012, 12 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
BC1955: Yes. Takes bump much better and bike seems more stable. I did not have to adjust the shock pre-load. ...Changing the shock spring
13 posts, last by:
BC1955
In: Rides, Meets, Events, 4/9/2012, 229 replies
Subject: HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
fastjohnny: Ok guys & gals, here it is: Maquoketa Inn & Suites 1019 West Platt Maquoketa, IA 52060 Phone: 563-652-6888 Room rate is $62.10 + tax per night which puts it just under $70. I was able to secure ...
Latest reply, 5/26/2012
Darn: Tilted Kilt... bring the sunglasses :innocent: :whistle: :evil:B)HOTEL FOR CENTRAL M&G - JUNE 29, 30, JULY1
230 posts, last by:
Darn
In: Bike Talk, 5/26/2012, 1 reply
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...
Latest reply, 5/26/2012
USAFRETIRED: One clamp mount on upper part of upright tube One clamp mount on bottom frame down by floorboard One ...Side Car mounting
2 posts, last by:
USAFRETIRED
In: Rides, Meets, Events, 3/16/2012, 98 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/26/2012
greyphart: I forgot they got menu's. :whistle:Central M&G, 2012 June 29,30, and July 1
99 posts, last by:
greyphart
In: Introductions, 5/24/2012, 34 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
Planet42: :welcome: from NY Mine's an '09 Silverado SHello from Kentucky
35 posts, last by:
Planet42
In: Bike Talk, 5/25/2012, 9 replies
Subject: Road Star Versus Warrior
Stevie: What do you think? Are they similar in price... accessories? are they like the VRODS of Road Stars?
Latest reply, 5/26/2012
MidStar07: The V-rod of Raodstars? Yeah, that's a pretty good description. I've ridden one and I liked it a lot. ...Road Star Versus Warrior
10 posts, last by:
MidStar07
In: Bolt Ons, 5/21/2012, 45 replies
Subject: Freedom Duals Are Ready!
moreland4: Well Ray at AAA Exhaust emailed me recently to inform me that the NEW Freedom True-Duals for the Road Star are ready for order/delivery. It's now decision time for me. Do I like the new 4" cans or would ...
Latest reply, 5/26/2012
smokescreens: they are brand spanking new. moreland ordered them and should have them in about 2 weeks. and he ...Freedom Duals Are Ready!
46 posts, last by:
smokescreens
In: Maintenance, 5/25/2012, 11 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
espressodude: It had been serviced at the dealership, I don't know what they had in it. All I know it that it had a ...I messed up the Barnett conversion some how
12 posts, last by:
espressodude
In: Bolt Ons, 5/24/2012, 12 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James
Latest reply, 5/26/2012
Plumbwader: Pull only here. Seems like i fight the spring a little more now but i like the way it cleans it up without ...Do I really need push & pull cables?
13 posts, last by:
Plumbwader
In: Miscellaneous, 5/26/2012, 2 replies
Subject: WTB Fairing
Just Dave: Anybody have a fairing laying around that is already set up for a RoadStar? Prefer Black but will will consider others depending on price, condition, etc.
Latest reply, 5/26/2012
Just Dave: Yeah, I know they are not really that expensive but cheaper is always better if you can get a clean used ...WTB Fairing
3 posts, last by:
Just Dave
In: Introductions, 5/25/2012, 30 replies
Subject: Hello to all
texican: I decided to join because I have gotten so much information from the clinic that has helped me. I have a 2000 and right now in the process of converting it to a trike. Kit should be delivered next week. ...
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioHello to all
31 posts, last by:
About_Time
In: Introductions, 5/24/2012, 35 replies
Subject: Long time fan, finally a member!!
RealFknClassy: Hi all, just bought a 2000 Roadstar 1600 in mid-April. Had a V Star 1100, loved it, but wanted a bigger bike. I'll post some pics when I get home. Tony
Latest reply, 5/26/2012
About_Time: :welcome: From OntarioLong time fan, finally a member!!
36 posts, last by:
About_Time
In: Bike Talk, 5/26/2012, 6 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/26/2012
mkayx: if it is a cobra you can buy just one light http://www.cobrausa.com/access_detail.php?model_id=40&make_id=6&category_id=15&product_id=584&model=Road ...Confused and a little frustrated.
7 posts, last by:
mkayx




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.