Road Star Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

TOPIC: Re:Cobra 2 into 1 Baffle removal Forum Tools Post New Topic Show latest posts Rules

#57027 Helmut (User) If you can't be young be immature Expert Boarder Posts: 421 Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   I would like to remove my baffle to add some packing as ther is NONE. I would expect to see some but none there no wonder it is so loud. Problem is I removed the 2 bolts that hold it in but cannot move the baffle. I tugged on it pretty hard but no movement. Do I have to use a slide hammer some how? Please suggest alternate methods.   Logged       The administrator has disabled public write access. #57061 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 17615 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   Spray some lubricant between the baffle and the can. If you don't have a slide hammer, bend the tip of a nail 90 degrees, insert it into one of the baffle holes and start tugging. Before wrapping the baffle material around the baffle, wrap the baffle with a couple of turns of metal door screening then wrap the baffle (each layer will provide a quieter muffler) and finish off with a turn of the screening. The screening keeps the baffle wrap in place longer. All of this can be kept in place with wire. Helps if you have more than two hands. Doc   Logged     My Bike Website   The administrator has disabled public write access. #57086 Curt (Moderator) Never to old to ride! Moderator Posts: 12507 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   Another method of removal is if you can screw a bolt into the baffle from the inside. Screw it in just enough to engage all the threads get a long boxend wrench and fasten a pair of vise grips to one end. Place the other end over the bolt that you screwed in and tap the vice grips with a hammer until the baffle comes out. In other words make a jerry rig slide hammer. Don't laugh it works good!   Logged     My Site Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?   The administrator has disabled public write access. #57274 Helmut (User) If you can't be young be immature Expert Boarder Posts: 421 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   DocShadow wrote: Spray some lubricant between the baffle and the can. If you don't have a slide hammer, bend the tip of a nail 90 degrees, insert it into one of the baffle holes and start tugging. Before wrapping the baffle material around the baffle, wrap the baffle with a couple of turns of metal door screening then wrap the baffle (each layer will provide a quieter muffler) and finish off with a turn of the screening. The screening keeps the baffle wrap in place longer. All of this can be kept in place with wire. Helps if you have more than two hands. Doc Doc i'll give that a go but I can't help but wonder if the packing will clog up and leave me stranded somewhere. Is that likely to happen? Also what will the packing do to the performance?   Logged       The administrator has disabled public write access. #57283 Big Bear (Moderator) Who loves you , Baby? Moderator Posts: 6997 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   Helmut, the way Doc is describing to set your baffle up is not too different than how V/H does the propipe baffle. You should not have any issues with the way Doc told you, for your peace of mind. BB   Logged       The administrator has disabled public write access. #57310 Helmut (User) If you can't be young be immature Expert Boarder Posts: 421 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   finally got the baffle out. Problem is that there is about a 2" wide band of packing on it near the end and that is all that can be put on. The rest of the baffle is covered with a steel cone that is welded in place. I cannot understand what effect the packing would have wear it is. Can someone expain this to me please. If I can't solve this roar at high speed the wife won't ride with me anymore(no jokes please) I actually enjoy having her along.   Logged       The administrator has disabled public write access. #57337 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 17615 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   Can you post a pic? Doc   Logged     My Bike Website   The administrator has disabled public write access. #57386 Big Bear (Moderator) Who loves you , Baby? Moderator Posts: 6997 Re:Cobra 2 into 1 Baffle removal 4 Years, 4 Months ago   Sounds Exactly how the propipe baffle is built. The packing is at the end of the baffle (about 2 inches worth), and there is about a 5 inch long steel cone area that is drilled around the perimeter. I've been told you can wrap that area with packing using the screen to prevent blow out of the packing to quite things down. Mine does not make nearly the noise level you are complaining of. Are you sure it doesn't just need fresh packing? Just a thought, as mine makes herself known when it's time to repack. BB   Logged       The administrator has disabled public write access.

Forum List Technical Corner Technical Discussions

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->