Re:2004 Roadstar Ignitor Unit - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

General

Miscellaneous

Re:2004 Roadstar Ignitor Unit

Favoured: 0

TOPIC: Re:2004 Roadstar Ignitor Unit

Forum Tools

#280507

bluezdawg (User)

Senior Boarder

Posts: 273

2004 Roadstar Ignitor Unit 3 Years, 1 Month ago

Think the ignitor unit on my 2004 Roadstar is on the fritz. The fuel pump will not run. I have power to the red wire on the relay and if I jumper it to 12v it runs fine. I pulled the plug off the ignitor and grounded the fuel pump relay wire and the fuel pump ran fine again. In the heat of battle I also replaced the relay, that didn't fix it. I'm pretty sure it's the ignitor unit but I thought I'd get some other opinions. Seems like with all the treads on this subject this is a problem that happens from time to time, I need some feedback before I go spend $400 at the stealership. Also, does anyone know of a performance replacement part.

Logged

Vietnam Vet, Legion Rider, Patriot Guard Rider

The administrator has disabled public write access.

#280509

bluezdawg (User)

Senior Boarder

Posts: 273

Re:2004 Roadstar Ignitor Unit 3 Years, 1 Month ago
Oh yea, another question.. would there be any harm in by-passing the ignitor unit and running the fuel pump direct? Thx!

Logged

Vietnam Vet, Legion Rider, Patriot Guard Rider

The administrator has disabled public write access.

#280521

SurveyWaters (User)

Lucky-Star

Expert Boarder

Posts: 456

Re:2004 Roadstar Ignitor Unit 3 Years, 1 Month ago
Is this what you need?

Logged

http://s799.photobucket.com/albums/yy279/surveywaters/My%20Bike/

The administrator has disabled public write access.

#280601

bluezdawg (User)

Senior Boarder

Posts: 273

Re:2004 Roadstar Ignitor Unit 3 Years, 1 Month ago
Looks like the right one. Right now I am considering getting a Speedstar CDI, which is on sale for about 250.00 on PowerPartsPlus.com right now. Going to wait to hear a few more comments before deciding. Stay tuned!

Logged

Vietnam Vet, Legion Rider, Patriot Guard Rider

The administrator has disabled public write access.

#280615

Flashback (Moderator)

Just the facts, Ma'am..

Moderator

Posts: 9762

Re:2004 Roadstar Ignitor Unit 3 Years, 1 Month ago
Hmmmm, So your saying that the fuel pump is tied into the CDI? I just thought the ignition switch powered it. learn something new everyday.. BTW, I have a speedstar ignitor, it has worked well for me. It's not adjustable like the dyna which some feel is a disadvantage, so you need to be aware that you can reach 5500 rpm before the limit kicks in...

Logged

The administrator has disabled public write access.

Forum List

General

Miscellaneous

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Electrical/Electronics, 6/19/2013, 7 replies Subject: Turn Signal Question shane8813: I have to replace my front right turn signal cause the socket got so corroded that the running light wont work. I even cleaned it and it worked for awhile. I have removed the old 1157 socket and I think ... Latest reply, 6/19/2013 jd750ace: Sounds like it's not a dual element socket. I buy pull offs on ebay.Turn Signal Question 8 posts, last by: jd750ace In: Bike Talk, 6/18/2013, 27 replies Subject: Down it goes! Darn: Dropped the bike today :blush: :oops: I was at work, it started to rain so I decided to pull it into the shop. As I pulled in on to the clean painted floor with wet tires.... Traction was not available, ... Latest reply, 6/19/2013 SoCali Rider: After a 3 hour commute on my 85 FLHT ...I pulled in the drive way, got off...and walked away ! Forgot ...Down it goes! 28 posts, last by: SoCali Rider In: Miscellaneous, 6/19/2013, 1 reply Subject: looking for riding boot advice and feedback sgfrye: ok after all the recent posts about broken ankles, toes, shins etc. got me to thinking about my boots. i've been wearing my last pair now for couple years. they are comfortable, but other than being ... Latest reply, 6/19/2013 fireman922: I have these. boots. They aren't steel toe or anything, but they give good support, are really comfortable ...looking for riding boot advice and feedback 2 posts, last by: fireman922 In: Technical Discussions, 6/17/2013, 67 replies Subject: Are stock Road stars slow? mongovb: I have a 2001 Road Star and am the slowest in the bunch which include a 900 Vulcan and 1100 V-star. I know my bike is no dragster but dam, they all out accelerate me. My bike has about 30k on the top end ... Latest reply, 6/19/2013 BTM. Samson: http://www.knfilters.com/search/product.aspx?prod=ra-077v their are a few sporting these on the Roadstars... Beauty ...Are stock Road stars slow? 68 posts, last by: BTM. Samson In: Miscellaneous, 6/19/2013, 1 reply Subject: Craigslist strikes again Lefty: http://southcoast.craigslist.org/mcd/3824499710.html I guess they are worth more than I thought Latest reply, 6/19/2013 Cheekster: It's from a dealership and its a Royal Star I believe. Fully loaded that's not bad. Just oldCraigslist strikes again 2 posts, last by: Cheekster In: Bike Talk, 6/18/2013, 19 replies Subject: Oops, wrong forum Erbman02: Sitting at dealer now, getting front Tire and Rivco risers installed. Way too hot to be doing risers myself. 9am it was in the upper 90's with humidity levels. Next will be to have seat modded. ... Latest reply, 6/19/2013 SKWEARpeg: :laugh: :laugh: I started playing that, and my wife was in the other room. It hadn't got 8 bars in, ...Oops, wrong forum 20 posts, last by: SKWEARpeg In: Non Motorcycle Topics, 6/19/2013, 4 replies Subject: Flight 800 coverup. Boatmark: No surprise here!:rolleyes: http://news.yahoo.com/blogs/lookout/twa-flight-800-crash-investigation-ntsb-141624708.html Latest reply, 6/19/2013 SKWEARpeg: http://www.cnn.com/2013/06/19/us/twa-crash-claim/index.htmlFlight 800 coverup. 5 posts, last by: SKWEARpeg In: Electrical/Electronics, 6/19/2013, 5 replies Subject: AFR meter and sensor? Uno979: I have been wanting to get my hands on a decent AFR set up. So far all the kits I've seen are over $200. Are there any at or under $100 that would suit the purpose of fine tuning my carb? I really would ... Latest reply, 6/19/2013 River: + 1, I paid 200 for mine at Baxter Auto parts. I,m just surprised that more people with carbs don't invest ...AFR meter and sensor? 6 posts, last by: River In: Miscellaneous, 6/17/2013, 17 replies Subject: Instrument cluster's blinding reflections Callred: Chrome, love it or hate it, we have it. I like the shiny parts of my bike with the exception of my instrument cluster cover. That pretty piece on top of the tank looks great until riding in the summer ... Latest reply, 6/19/2013 FatJay: I want to pick up a spare and play with it. It comes right up under my glasses and can be dangerously ...Instrument cluster's blinding reflections 18 posts, last by: FatJay In: Non Motorcycle Topics, 6/17/2013, 38 replies Subject: Immigration Reform BuffaloRider: http://www.wvgazette.com/Opinion/OpEdCommentaries/201306140130 If this bill passes it will be the final knife in the back of this Republic. Low skilled workers will be fighting each other for scraps ... Latest reply, 6/19/2013 Stevie: I'm not saying it couldn't happen but that would be extremely rare. I don't know your situation ...Immigration Reform 39 posts, last by: Stevie In: Maintenance, 6/18/2013, 12 replies Subject: Brake Fluid Shelf Life. GGattorr: Does brake fluid go bad if never opened. I have some DOT 3 Brake fluid that has never been opened. A couple of bottles probably 7 years old and a couple of bottles maybe about 4 years old. Friends gave ... Latest reply, 6/19/2013 FatJay: I flushed my brakes over the winter as I got a new front master cylinder. First time since I owned hte ...Brake Fluid Shelf Life. 13 posts, last by: FatJay In: Non Motorcycle Topics, 6/19/2013, 6 replies Subject: Why Ethel Changed Hotels DocShadow: Last week, Ethel checked into a motel on her 70th birthday and she was a bit lonely. She thought, "I'll call one of those men you see advertised in phone books for escorts and sensual massages." She ... Latest reply, 6/19/2013 FatJay: :D :D :DWhy Ethel Changed Hotels 7 posts, last by: FatJay In: Bike Talk, 6/19/2013, 3 replies Subject: Which cupholder - kuryakyn FatJay: I'm about to order a cup holder. http://www.kuryakyn.com/Products/756/Universal-Drink-Holders I'm between 1422 and 1462 Can anyone with 1462 comment on the fitment with the clutch perch? Latest reply, 6/19/2013 FatJay: I bought that one already with the hopes of it working, but sadly the "quality" is not there. It ...Which cupholder - kuryakyn 4 posts, last by: FatJay In: Bike Talk, 6/18/2013, 2 replies Subject: Anybody wanna do some trading? SCroadie: Wife is starting to ride a lil more. Looking for a one piece seat like a mustang daytripper or something along those lines. Gotta Danny Grey Buttcrack solo in real good shape andwill throw in a studded ... Latest reply, 6/19/2013 takehikes: Daytripper is a great seat. Many look at it and think it snot big enough. My wife who has packed for ...Anybody wanna do some trading? 3 posts, last by: takehikes In: Tech Tips, 4/22/2012, 12 replies Subject: strange noise from the pulley cover alex1600: ok srry for this odd subjest but today i got to ride my rd star an i hear a squeaky or chatering noise from the pulley cove it only happens when i give it throttle of down shifting could it bee my belt ... Latest reply, 6/19/2013 MarlboroMan: Thanks for the update as well!strange noise from the pulley cover 13 posts, last by: MarlboroMan In: Maintenance, 6/18/2013, 18 replies Subject: Clutch shift hit hard brianis: Do you guys notice if your stars shift hard I can definitely feel every shift. Thought maybe oil but its good checked free play in the clutch it's good Latest reply, 6/19/2013 SKWEARpeg: Since you bought it new, I'd think that may/migt/could be considered normal for breakin, and preliminary ...Clutch shift hit hard 19 posts, last by: SKWEARpeg In: Introductions, 6/18/2013, 20 replies Subject: Hi from New Zealand canyonlanz: Hi there, Just a quick first note from a big Roady fan in Auckland. Well i fell for the classic Roady 3 years ago and had been enjoying reading this forum for most of that time. Still do. This time last ... Latest reply, 6/19/2013 jeckes: :welcome: from WIHi from New Zealand 21 posts, last by: jeckes In: Miscellaneous, 6/19/2013, 6 replies Subject: Grizzly attack! Sparks500: Great example of marksmanship with an "itsy bitsy shooter" by a woman facing a fierce predator. What is the smallest caliber you trust to protect yourself? The 25 cal. Beretta Jetfire: Here's ... Latest reply, 6/19/2013 fastjohnny: Hmmmmm what kind of cougars are we talking here?? Four legged or two:rolleyes: :silly:Grizzly attack! 7 posts, last by: fastjohnny In: Bolt Ons, 6/19/2013, 2 replies Subject: Help finding recent thread rox: I'm hoping for some help finding a recent thread that addressed leather rear cylinder covers. It was titled no more burnt thighs or something close to that. I must admit that I have tried several variations ... Latest reply, 6/19/2013 FatJay: http://roadstarclinic.com/component/option,com_fireboard/Itemid,187/func,view/id,630095/catid,61/limit,10/limitstart,0/ They're ...Help finding recent thread 3 posts, last by: FatJay In: Bolt Ons, 6/18/2013, 16 replies Subject: Are all forward controls so expensive? Deerkiller: Looking at forward controls for the bike also. Pricey bastards, aren't they:blink: Am I missing something? $550-$600 is the cheapest I found anything for. Seems a little steep. I understand you get ... Latest reply, 6/19/2013 takehikes: I got a set for about $400 made for the R* but for the life of me I can't remember the name of them. ...Are all forward controls so expensive? 17 posts, last by: takehikes In: Bike Talk, 6/18/2013, 22 replies Subject: Here We Go - Pipes Install MartyN8677: Removed AIS and added BAK this afternoon. Getting ready to eat and then tackling the pipes install. My Cobra Speedster Slashcuts just arrived about a half hour ago. Somehow I think these will be more ... Latest reply, 6/19/2013 Edge51: This stuff just takes me a while. I've done almost no mechanic stuff before. I follow DETAILED ...Here We Go - Pipes Install 23 posts, last by: Edge51 In: Bike Talk, 6/18/2013, 19 replies Subject: Changed Main jet and now worse mpg Cheekster: It had 205 main jet and I put a 172.5 in and now I get worse mpg. I have K&N BAK, V&H Longshots, stock manifold and I used to get 33 and now I'm only getting 105 miles before my light comes on. Stock ... Latest reply, 6/19/2013 SKWEARpeg: davej, is running the Speedstar kit, with the main I mentioned, the needle set to 4 1/2, and I ...Changed Main jet and now worse mpg 20 posts, last by: SKWEARpeg In: Miscellaneous, 6/18/2013, 7 replies Subject: What to do on quarters? Rest and R* =) Papaskispartan: I hate being on quarters, because my Warden will be over me, making sure I rest. I will have to sneak in the garage when she is not looking. On my trip back from ME I took (7-9 June) I came back with ... Latest reply, 6/19/2013 SKWEARpeg: If it gets that bad, it may be time to go to an ear nose and throat guy. They have a little water ...What to do on quarters? Rest and R* =) 8 posts, last by: SKWEARpeg In: Pics of My Ride, 6/18/2013, 27 replies Subject: My first roadstar AWDimprezaL: About 3 minutes after picking it up. What is the official name for this color combo? Anyone know where I could get some touchup paint? The second ... Latest reply, 6/19/2013 AWDimprezaL: Signals removed, and fogs. Now all I need is to flip rear link (to lower it), get some of those raised ...My first roadstar 28 posts, last by: AWDimprezaL In: Pics of My Ride, 6/19/2013, 1 reply Subject: for sale bushrjackson: I just put her up for sale in the classified. Bushr :( Latest reply, 6/19/2013 FatJay: I'm sorry to hear that. Couldn't you just sell a kidney instead?for sale 2 posts, last by: FatJay In: Miscellaneous, 6/17/2013, 27 replies Subject: a little rider beware story.... takehikes: I am on a chopper forum and below is part of one guys post about his accident. The most important part is his take on footwear and "crash" bars....basically he is a guys with multi decades riding all kinds ... Latest reply, 6/19/2013 sgfrye: +1 on this, the time i layed my roadstar down trying to make a sharp right turn that snuck up ...a little rider beware story.... 28 posts, last by: sgfrye In: Body/Frame, 6/18/2013, 2 replies Subject: Progressive shock/spring advice needed RussB: I bougt my 06 R* with a progressice shock and spring already on it. I wish to adjust it tighter so it can handle more weight without sagging. I see it takes a spanner wrench but can't find one to fit.... Does ... Latest reply, 6/19/2013 Crusierbob: I used a 12" open end adjustable "Crescent" wrench, actually a 10" and a 12". I believe they will be ...Progressive shock/spring advice needed 3 posts, last by: Crusierbob In: Non Motorcycle Topics, 6/18/2013, 12 replies Subject: Positive ID. River: Stanley died in a fire and his body was burned pretty badly. The morgue needed someone to identify the body, so they sent for Stanley's two best deer hunting friends, Cooter and Gomer. The three men had ... Latest reply, 6/19/2013 tlc65: LMAOPositive ID. 13 posts, last by: tlc65 In: Jetting, 6/9/2013, 27 replies Subject: Any thoughts other than cleaning? DusterP94: I'm on my first R* as of March. It has always had a some hesitation and popping at about 1/8 to 1/4 throttle. I believe the PO let it set with untreated fuel all winter. So I pulled, disassembled, and ... Latest reply, 6/19/2013 SKWEARpeg: That's the way it's supposed to start. If you can start a R* without the enricher, then your doing something ...Any thoughts other than cleaning? 28 posts, last by: SKWEARpeg In: Electrical/Electronics, 6/18/2013, 4 replies Subject: No Lights ronseps: I have found that I have no lights, after checking the switch I think that I have found the problem but the switch costs a bit high, is there anywhere I can get a cheaper switch 05 Road Star. Latest reply, 6/19/2013 ronseps: I had checked the fuse and I do know that the lights work by messing with the wires . So the only thig ...No Lights 5 posts, last by: ronseps

New Forum Posts

In: Electrical/Electronics, 6/19/2013, 7 replies
Subject: Turn Signal Question
shane8813: I have to replace my front right turn signal cause the socket got so corroded that the running light wont work. I even cleaned it and it worked for awhile. I have removed the old 1157 socket and I think ...

Latest reply, 6/19/2013
jd750ace: Sounds like it's not a dual element socket. I buy pull offs on ebay.Turn Signal Question

8 posts, last by:

jd750ace

In: Bike Talk, 6/18/2013, 27 replies
Subject: Down it goes!
Darn: Dropped the bike today :blush: :oops: I was at work, it started to rain so I decided to pull it into the shop. As I pulled in on to the clean painted floor with wet tires.... Traction was not available, ...

Latest reply, 6/19/2013
SoCali Rider: After a 3 hour commute on my 85 FLHT ...I pulled in the drive way, got off...and walked away ! Forgot ...Down it goes!

28 posts, last by:

SoCali Rider

In: Miscellaneous, 6/19/2013, 1 reply
Subject: looking for riding boot advice and feedback
sgfrye: ok after all the recent posts about broken ankles, toes, shins etc. got me to thinking about my boots. i've been wearing my last pair now for couple years. they are comfortable, but other than being ...

Latest reply, 6/19/2013
fireman922: I have these. boots. They aren't steel toe or anything, but they give good support, are really comfortable ...looking for riding boot advice and feedback

2 posts, last by:

fireman922

In: Technical Discussions, 6/17/2013, 67 replies
Subject: Are stock Road stars slow?
mongovb: I have a 2001 Road Star and am the slowest in the bunch which include a 900 Vulcan and 1100 V-star. I know my bike is no dragster but dam, they all out accelerate me. My bike has about 30k on the top end ...

Latest reply, 6/19/2013
BTM. Samson: http://www.knfilters.com/search/product.aspx?prod=ra-077v their are a few sporting these on the Roadstars... Beauty ...Are stock Road stars slow?

68 posts, last by:

BTM. Samson

In: Miscellaneous, 6/19/2013, 1 reply
Subject: Craigslist strikes again
Lefty: http://southcoast.craigslist.org/mcd/3824499710.html I guess they are worth more than I thought

Latest reply, 6/19/2013
Cheekster: It's from a dealership and its a Royal Star I believe. Fully loaded that's not bad. Just oldCraigslist strikes again

2 posts, last by:

Cheekster

In: Bike Talk, 6/18/2013, 19 replies
Subject: Oops, wrong forum
Erbman02: Sitting at dealer now, getting front Tire and Rivco risers installed. Way too hot to be doing risers myself. 9am it was in the upper 90's with humidity levels. Next will be to have seat modded. ...

Latest reply, 6/19/2013
SKWEARpeg: :laugh: :laugh: I started playing that, and my wife was in the other room. It hadn't got 8 bars in, ...Oops, wrong forum

20 posts, last by:

SKWEARpeg

In: Non Motorcycle Topics, 6/19/2013, 4 replies
Subject: Flight 800 coverup.
Boatmark: No surprise here!:rolleyes: http://news.yahoo.com/blogs/lookout/twa-flight-800-crash-investigation-ntsb-141624708.html

Latest reply, 6/19/2013
SKWEARpeg: http://www.cnn.com/2013/06/19/us/twa-crash-claim/index.htmlFlight 800 coverup.

5 posts, last by:

SKWEARpeg

In: Electrical/Electronics, 6/19/2013, 5 replies
Subject: AFR meter and sensor?
Uno979: I have been wanting to get my hands on a decent AFR set up. So far all the kits I've seen are over $200. Are there any at or under $100 that would suit the purpose of fine tuning my carb? I really would ...

Latest reply, 6/19/2013
River: + 1, I paid 200 for mine at Baxter Auto parts. I,m just surprised that more people with carbs don't invest ...AFR meter and sensor?

6 posts, last by:

River

In: Miscellaneous, 6/17/2013, 17 replies
Subject: Instrument cluster's blinding reflections
Callred: Chrome, love it or hate it, we have it. I like the shiny parts of my bike with the exception of my instrument cluster cover. That pretty piece on top of the tank looks great until riding in the summer ...

Latest reply, 6/19/2013
FatJay: I want to pick up a spare and play with it. It comes right up under my glasses and can be dangerously ...Instrument cluster's blinding reflections

18 posts, last by:

FatJay

In: Non Motorcycle Topics, 6/17/2013, 38 replies
Subject: Immigration Reform
BuffaloRider: http://www.wvgazette.com/Opinion/OpEdCommentaries/201306140130 If this bill passes it will be the final knife in the back of this Republic. Low skilled workers will be fighting each other for scraps ...

Latest reply, 6/19/2013
Stevie: I'm not saying it couldn't happen but that would be extremely rare. I don't know your situation ...Immigration Reform

39 posts, last by:

Stevie

In: Maintenance, 6/18/2013, 12 replies
Subject: Brake Fluid Shelf Life.
GGattorr: Does brake fluid go bad if never opened. I have some DOT 3 Brake fluid that has never been opened. A couple of bottles probably 7 years old and a couple of bottles maybe about 4 years old. Friends gave ...

Latest reply, 6/19/2013
FatJay: I flushed my brakes over the winter as I got a new front master cylinder. First time since I owned hte ...Brake Fluid Shelf Life.

13 posts, last by:

FatJay

In: Non Motorcycle Topics, 6/19/2013, 6 replies
Subject: Why Ethel Changed Hotels
DocShadow: Last week, Ethel checked into a motel on her 70th birthday and she was a bit lonely. She thought, "I'll call one of those men you see advertised in phone books for escorts and sensual massages." She ...

Latest reply, 6/19/2013
FatJay: :D :D :DWhy Ethel Changed Hotels

7 posts, last by:

FatJay

In: Bike Talk, 6/19/2013, 3 replies
Subject: Which cupholder - kuryakyn
FatJay: I'm about to order a cup holder. http://www.kuryakyn.com/Products/756/Universal-Drink-Holders I'm between 1422 and 1462 Can anyone with 1462 comment on the fitment with the clutch perch?

Latest reply, 6/19/2013
FatJay: I bought that one already with the hopes of it working, but sadly the "quality" is not there. It ...Which cupholder - kuryakyn

4 posts, last by:

FatJay

In: Bike Talk, 6/18/2013, 2 replies
Subject: Anybody wanna do some trading?
SCroadie: Wife is starting to ride a lil more. Looking for a one piece seat like a mustang daytripper or something along those lines. Gotta Danny Grey Buttcrack solo in real good shape andwill throw in a studded ...

Latest reply, 6/19/2013
takehikes: Daytripper is a great seat. Many look at it and think it snot big enough. My wife who has packed for ...Anybody wanna do some trading?

3 posts, last by:

takehikes

In: Tech Tips, 4/22/2012, 12 replies
Subject: strange noise from the pulley cover
alex1600: ok srry for this odd subjest but today i got to ride my rd star an i hear a squeaky or chatering noise from the pulley cove it only happens when i give it throttle of down shifting could it bee my belt ...

Latest reply, 6/19/2013
MarlboroMan: Thanks for the update as well!strange noise from the pulley cover

13 posts, last by:

MarlboroMan

In: Maintenance, 6/18/2013, 18 replies
Subject: Clutch shift hit hard
brianis: Do you guys notice if your stars shift hard I can definitely feel every shift. Thought maybe oil but its good checked free play in the clutch it's good

Latest reply, 6/19/2013
SKWEARpeg: Since you bought it new, I'd think that may/migt/could be considered normal for breakin, and preliminary ...Clutch shift hit hard

19 posts, last by:

SKWEARpeg

In: Introductions, 6/18/2013, 20 replies
Subject: Hi from New Zealand
canyonlanz: Hi there, Just a quick first note from a big Roady fan in Auckland. Well i fell for the classic Roady 3 years ago and had been enjoying reading this forum for most of that time. Still do. This time last ...

Latest reply, 6/19/2013
jeckes: :welcome: from WIHi from New Zealand

21 posts, last by:

jeckes

In: Miscellaneous, 6/19/2013, 6 replies
Subject: Grizzly attack!
Sparks500: Great example of marksmanship with an "itsy bitsy shooter" by a woman facing a fierce predator. What is the smallest caliber you trust to protect yourself? The 25 cal. Beretta Jetfire: Here's ...

Latest reply, 6/19/2013
fastjohnny: Hmmmmm what kind of cougars are we talking here?? Four legged or two:rolleyes: :silly:Grizzly attack!

7 posts, last by:

fastjohnny

In: Bolt Ons, 6/19/2013, 2 replies
Subject: Help finding recent thread
rox: I'm hoping for some help finding a recent thread that addressed leather rear cylinder covers. It was titled no more burnt thighs or something close to that. I must admit that I have tried several variations ...

Latest reply, 6/19/2013
FatJay: http://roadstarclinic.com/component/option,com_fireboard/Itemid,187/func,view/id,630095/catid,61/limit,10/limitstart,0/ They're ...Help finding recent thread

3 posts, last by:

FatJay

In: Bolt Ons, 6/18/2013, 16 replies
Subject: Are all forward controls so expensive?
Deerkiller: Looking at forward controls for the bike also. Pricey bastards, aren't they:blink: Am I missing something? $550-$600 is the cheapest I found anything for. Seems a little steep. I understand you get ...

Latest reply, 6/19/2013
takehikes: I got a set for about $400 made for the R* but for the life of me I can't remember the name of them. ...Are all forward controls so expensive?

17 posts, last by:

takehikes

In: Bike Talk, 6/18/2013, 22 replies
Subject: Here We Go - Pipes Install
MartyN8677: Removed AIS and added BAK this afternoon. Getting ready to eat and then tackling the pipes install. My Cobra Speedster Slashcuts just arrived about a half hour ago. Somehow I think these will be more ...

Latest reply, 6/19/2013
Edge51: This stuff just takes me a while. I've done almost no mechanic stuff before. I follow DETAILED ...Here We Go - Pipes Install

23 posts, last by:

Edge51

In: Bike Talk, 6/18/2013, 19 replies
Subject: Changed Main jet and now worse mpg
Cheekster: It had 205 main jet and I put a 172.5 in and now I get worse mpg. I have K&N BAK, V&H Longshots, stock manifold and I used to get 33 and now I'm only getting 105 miles before my light comes on. Stock ...

Latest reply, 6/19/2013
SKWEARpeg: davej, is running the Speedstar kit, with the main I mentioned, the needle set to 4 1/2, and I ...Changed Main jet and now worse mpg

20 posts, last by:

SKWEARpeg

In: Miscellaneous, 6/18/2013, 7 replies
Subject: What to do on quarters? Rest and R* =)
Papaskispartan: I hate being on quarters, because my Warden will be over me, making sure I rest. I will have to sneak in the garage when she is not looking. On my trip back from ME I took (7-9 June) I came back with ...

Latest reply, 6/19/2013
SKWEARpeg: If it gets that bad, it may be time to go to an ear nose and throat guy. They have a little water ...What to do on quarters? Rest and R* =)

8 posts, last by:

SKWEARpeg

In: Pics of My Ride, 6/18/2013, 27 replies
Subject: My first roadstar
AWDimprezaL: About 3 minutes after picking it up. What is the official name for this color combo? Anyone know where I could get some touchup paint? The second ...

Latest reply, 6/19/2013
AWDimprezaL: Signals removed, and fogs. Now all I need is to flip rear link (to lower it), get some of those raised ...My first roadstar

28 posts, last by:

AWDimprezaL

In: Pics of My Ride, 6/19/2013, 1 reply
Subject: for sale
bushrjackson: I just put her up for sale in the classified. Bushr :(

Latest reply, 6/19/2013
FatJay: I'm sorry to hear that. Couldn't you just sell a kidney instead?for sale

2 posts, last by:

FatJay

In: Miscellaneous, 6/17/2013, 27 replies
Subject: a little rider beware story....
takehikes: I am on a chopper forum and below is part of one guys post about his accident. The most important part is his take on footwear and "crash" bars....basically he is a guys with multi decades riding all kinds ...

Latest reply, 6/19/2013
sgfrye: +1 on this, the time i layed my roadstar down trying to make a sharp right turn that snuck up ...a little rider beware story....

28 posts, last by:

sgfrye

In: Body/Frame, 6/18/2013, 2 replies
Subject: Progressive shock/spring advice needed
RussB: I bougt my 06 R* with a progressice shock and spring already on it. I wish to adjust it tighter so it can handle more weight without sagging. I see it takes a spanner wrench but can't find one to fit.... Does ...

Latest reply, 6/19/2013
Crusierbob: I used a 12" open end adjustable "Crescent" wrench, actually a 10" and a 12". I believe they will be ...Progressive shock/spring advice needed

3 posts, last by:

Crusierbob

In: Non Motorcycle Topics, 6/18/2013, 12 replies
Subject: Positive ID.
River: Stanley died in a fire and his body was burned pretty badly. The morgue needed someone to identify the body, so they sent for Stanley's two best deer hunting friends, Cooter and Gomer. The three men had ...

Latest reply, 6/19/2013
tlc65: LMAOPositive ID.

13 posts, last by:

tlc65

In: Jetting, 6/9/2013, 27 replies
Subject: Any thoughts other than cleaning?
DusterP94: I'm on my first R* as of March. It has always had a some hesitation and popping at about 1/8 to 1/4 throttle. I believe the PO let it set with untreated fuel all winter. So I pulled, disassembled, and ...

Latest reply, 6/19/2013
SKWEARpeg: That's the way it's supposed to start. If you can start a R* without the enricher, then your doing something ...Any thoughts other than cleaning?

28 posts, last by:

SKWEARpeg

In: Electrical/Electronics, 6/18/2013, 4 replies
Subject: No Lights
ronseps: I have found that I have no lights, after checking the switch I think that I have found the problem but the switch costs a bit high, is there anywhere I can get a cheaper switch 05 Road Star.

Latest reply, 6/19/2013
ronseps: I had checked the fuse and I do know that the lights work by messing with the wires . So the only thig ...No Lights

5 posts, last by:

ronseps

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.