Re:Carb Cough - Timing Screw - Road Star Forum

	Road Star Forum	Forum Flat View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Article Discussions

Re:Carb Cough - Timing Screw

Favoured: 0

TOPIC: Re:Carb Cough - Timing Screw

Forum Tools

#296

nosleepgeek (User)

Fresh Boarder

Posts: 3

Re:Carb Cough - Timing Screw 7 Years, 10 Months ago

Here's a followup to my earlier post...

Found another problem with one of the two carbs I have that will also cause a timing related cough. I'll do my best to explain.
More specifically, I found that even after adjusting the timing cam (backing out the screw) to the most advanced position on the pump cam, the cam could be rotated slightly back and forth without pushing on the pump plunger. In other words, with the throttle fully closed (idle), there was play in the whole throttle plate-to-accel pump mechanism that could not be adjusted out. I carefully compared carbs to each other and could find no reason for the play in the one carb. Sooo...out came the Vicegrips...tweaked the metal arm the cam is mounted to forcing the whole affair to a zero lash relationship...that is, the cam is under spring pressure against the end of actuator arm at all times...no slop, period.

The bottom line is...the actuator arm that inter-connects the throttle plate with the pump cam can not have ANY slop in it. After a 40 mile ride, purposely doing everything I could to make it cough...I couldn't...not even once!

If I get ambitious, I'll redline some of the carb graphics and post 'em to make it easier to understand what I'm talking about.

Yes, Martha! You can have a cough free bike!

--Chris

Logged

The administrator has disabled public write access.

Topics

Author

Date

Carb Cough - Timing Screw

nosleepgeek

2004/07/22 19:06

Re:Carb Cough - Timing Screw

2004/07/23 15:29

Re:Carb Cough - Timing Screw

roscoe

2004/07/27 16:44

Re:Carb Cough - Timing Screw

nosleepgeek

2004/07/28 05:42

Re:Carb Cough - Timing Screw

nosleepgeek

2004/07/28 05:48

Forum List

Technical Corner

Article Discussions

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Introductions, 5/27/2012, 24 replies Subject: Hello from TN. Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ... Latest reply, 5/27/2012 blue star: :welcome: from N.E. Louisiana.Hello from TN. 25 posts, last by: blue star In: Website General, 5/27/2012, 17 replies Subject: Members by location. Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ... Latest reply, 5/27/2012 blue star: After you put in city and state, you have to hit the SUBMIT button at the bottom.Members by location. 18 posts, last by: blue star In: Jetting, 5/27/2012, 1 reply Subject: Thank you FF56: I would like to thank Curt and Erbman. Curt Thank you for posting the info on your web site about how the carbs on these bikes work, been every informative. Erbman Thank you for you Stop thread, ... Latest reply, 5/27/2012 Erbman02: thats the idle adjuster under the filter. Works hand in hand with pilot screw for idle adjustment. ...Thank you 2 posts, last by: Erbman02 In: Bike Talk, 5/27/2012, 8 replies Subject: Road Star Ride Tomorrow Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ... Latest reply, 5/27/2012 Gram: Post here or send me a pm when your coming my way. Idyllwild is awesome, and I go up to big bear ...Road Star Ride Tomorrow 9 posts, last by: Gram In: Technical Discussions, 5/26/2012, 27 replies Subject: advice on tail bags for a road trip. smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ... Latest reply, 5/27/2012 jd750ace: I have the T-Bags Lone Star. The main compartment is expandable, and it has the sleeping bag roll, and ...advice on tail bags for a road trip. 28 posts, last by: jd750ace In: Rides, Meets, Events, 5/14/2012, 87 replies Subject: WNC Meet and Greet theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ... Latest reply, 5/27/2012 pastornj: You can add me to the group,and I'll help with whatever I can. I'm in Fayetteville - not sure how far ...WNC Meet and Greet 88 posts, last by: pastornj In: Maintenance, 5/27/2012, 14 replies Subject: Low Fuel Light moreland4: This is my first riding season with the HSR 42 and being pumpless. Trying to recall when the low fuel light typically comes on. Does it light up before or after switching to reserve? Asking because ... Latest reply, 5/27/2012 *RoadDave*: Your new petcock pickup should be the same height as the stock petcock you remove, otherwise the pickup ...Low Fuel Light 15 posts, last by: RoadDave In: Pics of My Ride, 5/27/2012, 13 replies Subject: Road Glide fairing finally installed polishdog: Not sure if I like it yet, still on the fence. It might just end up on ebay... that way I can get hard bags and maybe duals! Latest reply, 5/27/2012 Stevie: looks great, buyer's remorse? give it some time!Road Glide fairing finally installed 14 posts, last by: Stevie In: Maintenance, 5/27/2012 Subject: Stupid mistake ok outcome FF56: So I installed a new set of EBC HH pads on the front yesterday, changed the fluid with DOT 4, only had time to ride around the block. Front brake seemed weak, more pull than normal, which wasn't that ... Stupid mistake ok outcome new topic by: FF56 In: Bike Talk, 5/24/2012, 19 replies Subject: Warrior starter River: I am thinking of putting on a Warrior starter even though my bike only has 2600 miles on it. What do you guys think of doing that? Latest reply, 5/27/2012 nightstar57: i second your opinion.. did the same with mine plus the wires,warrior relay and a 310amp battery..man ...Warrior starter 20 posts, last by: nightstar57 In: Bike Talk, 4/30/2012, 37 replies Subject: S.O.S all roadstar gurus...HELP rballew: I still haven't solved the issue with my signals,speedo,odometer,clock & fuel gauge working imtermittenly or they work until i touch the brakes(front or rear) the brake light and horn will not work at ... Latest reply, 5/27/2012 Bonzaiii: rballew started the thread and I "bonzaii" posted on the very next post that I was having the exact same ...S.O.S all roadstar gurus...HELP 38 posts, last by: Bonzaiii In: Bike Talk, 5/27/2012 Subject: Awesome deal for someone in NC Locke6169: http://charlotte.craigslist.org/mcy/3041680137.html Just saw this bike and thought I would pass it along. Awesome deal for someone in NC new topic by: Locke6169 In: Jetting, 5/24/2012, 17 replies Subject: accelerator pump squirt rooftop: I've been trying to find out where the accelerator pump squirt should be aimed.It seems some say it should strike the needle in the center and some say off to the side.I can rotate it up or down but not ... Latest reply, 5/27/2012 rooftop: Erbman02, I know that when the beast is warn and running, that any gas mixture should atomize before ...accelerator pump squirt 18 posts, last by: rooftop In: Bike Talk, 5/27/2012, 4 replies Subject: NEW BIKE roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ... Latest reply, 5/27/2012 tibadoe: If you have any questions about your new Venture, this is a good forum: My brother has a Venture and ...NEW BIKE 5 posts, last by: tibadoe In: Miscellaneous, 4/19/2012, 12 replies Subject: Hey Stevie... OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh: Latest reply, 5/27/2012 Stevie: hey man! sorry I just saw this guess by now you already saw the show lol laffing devils ...Hey Stevie... 13 posts, last by: Stevie In: Miscellaneous, 5/27/2012 Subject: Antic euro made bikes saab9k: http://www.ukwheels.com/motorbikes.asp I like the Nimbus with sidecar. Antic euro made bikes new topic by: saab9k In: Maintenance, 4/22/2012, 21 replies Subject: Intake manifold jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ... Latest reply, 5/27/2012 Erbman02: Thats why my instructor said to have a casting place take a look at it. Found one in Tampa. So ...Intake manifold 22 posts, last by: Erbman02 In: Bike Talk, 5/27/2012, 6 replies Subject: Interesting fact River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ... Latest reply, 5/27/2012 Erbman02: next time you accelerate, see how rich you get, 13.5 AFR is needed to achieve max Tq. If you can't hit ...Interesting fact 7 posts, last by: Erbman02 In: Non Motorcycle Topics, 5/26/2012, 29 replies Subject: Thank you, all who served. fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from John) Latest reply, 5/27/2012 brown91redcam: Thank you to all those that are serving and have served our great country we all owe our gratitude for ...Thank you, all who served. 30 posts, last by: brown91redcam In: Non Motorcycle Topics, 5/25/2012, 9 replies Subject: How To Catch A Bear jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ... Latest reply, 5/27/2012 buckshot: :laugh: :laugh: My 13 year old grandson loved it to.How To Catch A Bear 10 posts, last by: buckshot In: Non Motorcycle Topics, 5/25/2012, 8 replies Subject: Eyelet/Grommet Machine info? Ricohoc: I know this is a motorcycle forum, but this is the "Non Motorcycle Topics" area. :laugh: Anyone here have any knowledge/experience with an eyelet/grommet machine? I've been thinking ... Latest reply, 5/27/2012 buckshot: Check out . The table top style would be a good one. You could use thicker mat. ...Eyelet/Grommet Machine info? 9 posts, last by: buckshot In: Maintenance, 5/27/2012, 2 replies Subject: front brakes dragging murshes: i noticed the handling on my bike has changed recentley. so i jacked it up and spun the front wheel. i can only get maybe half a rotation when i spin it. i cant get the front brakes to stop dragging. any ... Latest reply, 5/27/2012 Curt: They all rub the pistons don't retract far enough to keep the pad off the rotor. If you have too much ...front brakes dragging 3 posts, last by: Curt In: Introductions, 5/26/2012, 23 replies Subject: Hello from the Region kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it. Latest reply, 5/27/2012 buckshot: :welcome: from Northeast IowaHello from the Region 24 posts, last by: buckshot In: Bolt Ons, 5/26/2012, 20 replies Subject: New Handlebars - Stock Grips? alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ... Latest reply, 5/27/2012 dvblair: oops didn't read all the posts, but if anyone wants them they are for sale.New Handlebars - Stock Grips? 21 posts, last by: dvblair In: Bike Talk, 5/27/2012, 3 replies Subject: help needed : Road Star "Ultra" mods Chevyhoss: Good Afternoon Everyone, Posted on another topic earlier today but here goes... It's been quite awhile since I have posted on here but the "Outta Here" thread caught my interest. My wife's ... Latest reply, 5/27/2012 ultrastar: Keith when I did mIne I went with all fiberglass parts the only PVC part on my bike is the HD lower fairing ...help needed : Road Star "Ultra" mods 4 posts, last by: ultrastar In: Electrical/Electronics, 5/27/2012, 6 replies Subject: Bike won't start. Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ... Latest reply, 5/27/2012 fireman922: Fuel pump relay?Bike won't start. 7 posts, last by: fireman922 In: Rides, Meets, Events, 5/27/2012, 1 reply Subject: Seaside Bike Fest, 2nd week of July River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out. Latest reply, 5/27/2012 Shadowofself: I usually ride down even if just for a day trip. Just got Roadie so will be a different ride this year. DanSeaside Bike Fest, 2nd week of July 2 posts, last by: Shadowofself In: Bolt Ons, 5/26/2012, 28 replies Subject: Flag mounts for 6"x9" Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them? Latest reply, 5/27/2012 Darn: The angle iron was actually pretty easy to do, but the U-bolts I bought were too long so after I put ...Flag mounts for 6"x9" 29 posts, last by: Darn In: Bike Talk, 5/26/2012, 3 replies Subject: Side Car mounting Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ... Latest reply, 5/27/2012 USAFRETIRED: Post a picture of the sidecar. Might be able to identify it.Side Car mounting 4 posts, last by: USAFRETIRED In: Bike Talk, 5/21/2012, 30 replies Subject: Qutta here WhiteStarNC: Folks - after 6 years as a Road Star owner and forum member I just wanted to say thanks for all the help, community, support and laughs I have gotten from this forum. I road the Roadie to the Myrtle ... Latest reply, 5/27/2012 Blagonravov: roadstarclinic.com is wonderful. There's always all of the ideal info in the ideas of my fingers. Thanks ...Qutta here 31 posts, last by: Blagonravov

New Forum Posts

In: Introductions, 5/27/2012, 24 replies
Subject: Hello from TN.
Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ...

Latest reply, 5/27/2012
blue star: :welcome: from N.E. Louisiana.Hello from TN.

25 posts, last by:

blue star

In: Website General, 5/27/2012, 17 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...

Latest reply, 5/27/2012
blue star: After you put in city and state, you have to hit the SUBMIT button at the bottom.Members by location.

18 posts, last by:

blue star

In: Jetting, 5/27/2012, 1 reply
Subject: Thank you
FF56: I would like to thank Curt and Erbman. Curt Thank you for posting the info on your web site about how the carbs on these bikes work, been every informative. Erbman Thank you for you Stop thread, ...

Latest reply, 5/27/2012
Erbman02: thats the idle adjuster under the filter. Works hand in hand with pilot screw for idle adjustment. ...Thank you

2 posts, last by:

Erbman02

In: Bike Talk, 5/27/2012, 8 replies
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...

Latest reply, 5/27/2012
Gram: Post here or send me a pm when your coming my way. Idyllwild is awesome, and I go up to big bear ...Road Star Ride Tomorrow

9 posts, last by:

Gram

In: Technical Discussions, 5/26/2012, 27 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...

Latest reply, 5/27/2012
jd750ace: I have the T-Bags Lone Star. The main compartment is expandable, and it has the sleeping bag roll, and ...advice on tail bags for a road trip.

28 posts, last by:

jd750ace

In: Rides, Meets, Events, 5/14/2012, 87 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...

Latest reply, 5/27/2012
pastornj: You can add me to the group,and I'll help with whatever I can. I'm in Fayetteville - not sure how far ...WNC Meet and Greet

88 posts, last by:

pastornj

In: Maintenance, 5/27/2012, 14 replies
Subject: Low Fuel Light
moreland4: This is my first riding season with the HSR 42 and being pumpless. Trying to recall when the low fuel light typically comes on. Does it light up before or after switching to reserve? Asking because ...

Latest reply, 5/27/2012
Road*Dave: Your new petcock pickup should be the same height as the stock petcock you remove, otherwise the pickup ...Low Fuel Light

15 posts, last by:

Road*Dave

In: Pics of My Ride, 5/27/2012, 13 replies
Subject: Road Glide fairing finally installed
polishdog: Not sure if I like it yet, still on the fence. It might just end up on ebay... that way I can get hard bags and maybe duals!

Latest reply, 5/27/2012
Stevie: looks great, buyer's remorse? give it some time!Road Glide fairing finally installed

14 posts, last by:

Stevie

In: Maintenance, 5/27/2012
Subject: Stupid mistake ok outcome
FF56: So I installed a new set of EBC HH pads on the front yesterday, changed the fluid with DOT 4, only had time to ride around the block. Front brake seemed weak, more pull than normal, which wasn't that ...
Stupid mistake ok outcome

new topic by:

FF56

In: Bike Talk, 5/24/2012, 19 replies
Subject: Warrior starter
River: I am thinking of putting on a Warrior starter even though my bike only has 2600 miles on it. What do you guys think of doing that?

Latest reply, 5/27/2012
nightstar57: i second your opinion.. did the same with mine plus the wires,warrior relay and a 310amp battery..man ...Warrior starter

20 posts, last by:

nightstar57

In: Bike Talk, 4/30/2012, 37 replies
Subject: S.O.S all roadstar gurus...HELP
rballew: I still haven't solved the issue with my signals,speedo,odometer,clock & fuel gauge working imtermittenly or they work until i touch the brakes(front or rear) the brake light and horn will not work at ...

Latest reply, 5/27/2012
Bonzaiii: rballew started the thread and I "bonzaii" posted on the very next post that I was having the exact same ...S.O.S all roadstar gurus...HELP

38 posts, last by:

Bonzaiii

In: Bike Talk, 5/27/2012
Subject: Awesome deal for someone in NC
Locke6169: http://charlotte.craigslist.org/mcy/3041680137.html Just saw this bike and thought I would pass it along.
Awesome deal for someone in NC

new topic by:

Locke6169

In: Jetting, 5/24/2012, 17 replies
Subject: accelerator pump squirt
rooftop: I've been trying to find out where the accelerator pump squirt should be aimed.It seems some say it should strike the needle in the center and some say off to the side.I can rotate it up or down but not ...

Latest reply, 5/27/2012
rooftop: Erbman02, I know that when the beast is warn and running, that any gas mixture should atomize before ...accelerator pump squirt

18 posts, last by:

rooftop

In: Bike Talk, 5/27/2012, 4 replies
Subject: NEW BIKE
roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ...

Latest reply, 5/27/2012
tibadoe: If you have any questions about your new Venture, this is a good forum: My brother has a Venture and ...NEW BIKE

5 posts, last by:

tibadoe

In: Miscellaneous, 4/19/2012, 12 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:

Latest reply, 5/27/2012
Stevie: hey man! sorry I just saw this guess by now you already saw the show lol laffing devils ...Hey Stevie...

13 posts, last by:

Stevie

In: Miscellaneous, 5/27/2012
Subject: Antic euro made bikes
saab9k: http://www.ukwheels.com/motorbikes.asp I like the Nimbus with sidecar.
Antic euro made bikes

new topic by:

saab9k

In: Maintenance, 4/22/2012, 21 replies
Subject: Intake manifold
jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ...

Latest reply, 5/27/2012
Erbman02: Thats why my instructor said to have a casting place take a look at it. Found one in Tampa. So ...Intake manifold

22 posts, last by:

Erbman02

In: Bike Talk, 5/27/2012, 6 replies
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...

Latest reply, 5/27/2012
Erbman02: next time you accelerate, see how rich you get, 13.5 AFR is needed to achieve max Tq. If you can't hit ...Interesting fact

7 posts, last by:

Erbman02

In: Non Motorcycle Topics, 5/26/2012, 29 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from John)

Latest reply, 5/27/2012
brown91redcam: Thank you to all those that are serving and have served our great country we all owe our gratitude for ...Thank you, all who served.

30 posts, last by:

brown91redcam

In: Non Motorcycle Topics, 5/25/2012, 9 replies
Subject: How To Catch A Bear
jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ...

Latest reply, 5/27/2012
buckshot: :laugh: :laugh: My 13 year old grandson loved it to.How To Catch A Bear

10 posts, last by:

buckshot

In: Non Motorcycle Topics, 5/25/2012, 8 replies
Subject: Eyelet/Grommet Machine info?
Ricohoc: I know this is a motorcycle forum, but this is the "Non Motorcycle Topics" area. :laugh: Anyone here have any knowledge/experience with an eyelet/grommet machine? I've been thinking ...

Latest reply, 5/27/2012
buckshot: Check out . The table top style would be a good one. You could use thicker mat. ...Eyelet/Grommet Machine info?

9 posts, last by:

buckshot

In: Maintenance, 5/27/2012, 2 replies
Subject: front brakes dragging
murshes: i noticed the handling on my bike has changed recentley. so i jacked it up and spun the front wheel. i can only get maybe half a rotation when i spin it. i cant get the front brakes to stop dragging. any ...

Latest reply, 5/27/2012
Curt: They all rub the pistons don't retract far enough to keep the pad off the rotor. If you have too much ...front brakes dragging

3 posts, last by:

Curt

In: Introductions, 5/26/2012, 23 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/27/2012
buckshot: :welcome: from Northeast IowaHello from the Region

24 posts, last by:

buckshot

In: Bolt Ons, 5/26/2012, 20 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...

Latest reply, 5/27/2012
dvblair: oops didn't read all the posts, but if anyone wants them they are for sale.New Handlebars - Stock Grips?

21 posts, last by:

dvblair

In: Bike Talk, 5/27/2012, 3 replies
Subject: help needed : Road Star "Ultra" mods
Chevyhoss: Good Afternoon Everyone, Posted on another topic earlier today but here goes... It's been quite awhile since I have posted on here but the "Outta Here" thread caught my interest. My wife's ...

Latest reply, 5/27/2012
ultrastar: Keith when I did mIne I went with all fiberglass parts the only PVC part on my bike is the HD lower fairing ...help needed : Road Star "Ultra" mods

4 posts, last by:

ultrastar

In: Electrical/Electronics, 5/27/2012, 6 replies
Subject: Bike won't start.
Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ...

Latest reply, 5/27/2012
fireman922: Fuel pump relay?Bike won't start.

7 posts, last by:

fireman922

In: Rides, Meets, Events, 5/27/2012, 1 reply
Subject: Seaside Bike Fest, 2nd week of July
River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out.

Latest reply, 5/27/2012
Shadowofself: I usually ride down even if just for a day trip. Just got Roadie so will be a different ride this year. DanSeaside Bike Fest, 2nd week of July

2 posts, last by:

Shadowofself

In: Bolt Ons, 5/26/2012, 28 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?

Latest reply, 5/27/2012
Darn: The angle iron was actually pretty easy to do, but the U-bolts I bought were too long so after I put ...Flag mounts for 6"x9"

29 posts, last by:

Darn

In: Bike Talk, 5/26/2012, 3 replies
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...

Latest reply, 5/27/2012
USAFRETIRED: Post a picture of the sidecar. Might be able to identify it.Side Car mounting

4 posts, last by:

USAFRETIRED

In: Bike Talk, 5/21/2012, 30 replies
Subject: Qutta here
WhiteStarNC: Folks - after 6 years as a Road Star owner and forum member I just wanted to say thanks for all the help, community, support and laughs I have gotten from this forum. I road the Roadie to the Myrtle ...

Latest reply, 5/27/2012
Blagonravov: roadstarclinic.com is wonderful. There's always all of the ideal info in the ideas of my fingers. Thanks ...Qutta here

31 posts, last by:

Blagonravov

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.