Re:BIG GROWL PIPES=BIG MISTAKE - Road Star Forum

	Road Star Forum	Forum Flat View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

General

Bike Talk

Re:BIG GROWL PIPES=BIG MISTAKE (1 viewing) (1) Guest

Favoured: 0

TOPIC: Re:BIG GROWL PIPES=BIG MISTAKE

Forum Tools

#210782

immusicman (User)

Fresh Boarder

Posts: 30

Re:BIG GROWL PIPES=BIG MISTAKE 2 Years, 7 Months ago

I have a set of cobras on my bike now that have rusted terribly on the rear pipes after the headers, the previous owner let them rust down practically. So I myself ordered a set of the big growl long rifles, which look like my cobras, and have a slightly bigger bore at 2 1/4 inch instead of 2". I am going to try a set of the 4" baffles in them to quiet them a bit. If I don't like them, I will return them at my expense, I will not be out much, but I think I will be satisfied, they have to look better than what I have, and as far as jetting, mine runs a tad rich anyway, so I should be ok. I will let ya know how it goes when i get them on this week. I am a bit worried about having to buy heat shields, heck they cost more than the pipes!

Logged

Last Edit: 2009/07/12 22:50 By immusicman. Reason: wrong spelling

The administrator has disabled public write access.

Topics

Author

Date

BIG GROWL PIPES=BIG MISTAKE

hoodratt

2008/04/17 03:57

Re:BIG GROWL PIPES=BIG MISTAKE

2005Roadstar

2008/04/17 05:59

Re:BIG GROWL PIPES=BIG MISTAKE

Clifford

2008/04/17 06:29

Re:BIG GROWL PIPES=BIG MISTAKE

hoodratt

2008/04/17 10:32

Re:BIG GROWL PIPES=BIG MISTAKE

erizo

2008/04/17 10:38

Re:BIG GROWL PIPES=BIG MISTAKE

PapaTom

2008/04/17 12:16

Re:BIG GROWL PIPES=BIG MISTAKE

2005Roadstar

2008/04/17 14:01

Re:BIG GROWL PIPES=BIG MISTAKE

hardone2get

2008/04/17 17:34

Re:BIG GROWL PIPES=BIG MISTAKE

PapaTom

2008/04/17 18:57

Re:BIG GROWL PIPES=BIG MISTAKE

Frankallen

2009/05/12 17:50

Re:BIG GROWL PIPES=BIG MISTAKE

rand1965

2009/05/12 18:04

Re:BIG GROWL PIPES=BIG MISTAKE

Boatmark

2009/05/12 20:32

Re:BIG GROWL PIPES=BIG MISTAKE

noxqsays

2009/05/13 06:56

Re:BIG GROWL PIPES=BIG MISTAKE

Marshall

2009/05/12 22:46

Re:BIG GROWL PIPES=BIG MISTAKE

Napa73

2009/06/14 19:47

Re:BIG GROWL PIPES=BIG MISTAKE

Sirkl

2009/05/13 06:41

Re:BIG GROWL PIPES=BIG MISTAKE

Roguedreams2

2009/05/13 07:27

Re:BIG GROWL PIPES=BIG MISTAKE

LokoTripper

2009/05/13 11:36

Re:BIG GROWL PIPES=BIG MISTAKE

Frankallen

2009/05/16 18:14

Re:BIG GROWL PIPES=BIG MISTAKE

retro_19702000

2009/06/29 20:39

Re:BIG GROWL PIPES=BIG MISTAKE

Starkruzen

2011/02/03 05:09

Re:BIG GROWL PIPES=BIG MISTAKE

greenpus

2011/02/03 05:18

Re:BIG GROWL PIPES=BIG MISTAKE

mkayx

2011/02/03 06:29

Re:BIG GROWL PIPES=BIG MISTAKE

erizo

2011/02/03 07:22

Re:BIG GROWL PIPES=BIG MISTAKE

louie

2011/02/03 07:47

Re:BIG GROWL PIPES=BIG MISTAKE

Flashback

2009/06/29 21:36

Re:BIG GROWL PIPES=BIG MISTAKE

retro_19702000

2009/06/29 21:54

Re:BIG GROWL PIPES=BIG MISTAKE

Flashback

2009/06/29 22:04

Re:BIG GROWL PIPES=BIG MISTAKE

immusicman

2009/07/12 22:49

Re:BIG GROWL PIPES=BIG MISTAKE

seclusion

2011/02/02 21:35

Re:BIG GROWL PIPES=BIG MISTAKE

Crazyron1369

2011/02/03 07:21

Re:BIG GROWL PIPES=BIG MISTAKE

Rev_Rock

2011/02/02 22:00

Forum List

General

Bike Talk

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bike Talk, 2/10/2012, 20 replies Subject: this road star is to cool!!! smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow Latest reply, 2/10/2012 Edge51: very nice..but not my cup of tea...just sayinthis road star is to cool!!! 21 posts, last by: Edge51 In: Introductions, 2/10/2012, 28 replies Subject: hello all DON1989: I bought me a 2008 road star silverado 1700 on new years day road it home about 18 miles when it was about 35 outside and still loved it!!! also pretty excited about finding this site Latest reply, 2/10/2012 Paintertom40: hello from Ohio hello all 29 posts, last by: Paintertom40 In: Bike Talk, 2/10/2012, 2 replies Subject: Fairing and tour trunk ideas Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom Latest reply, 2/10/2012 tarcon: I have the matuza. I like it fine. There are more expensive ones out there. This one fits my needs and ...Fairing and tour trunk ideas 3 posts, last by: tarcon In: Non Motorcycle Topics, 2/10/2012, 3 replies Subject: Got my new boots! chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ... Latest reply, 2/10/2012 tarcon: Nice boots. Milwaukee is a good choice.Got my new boots! 4 posts, last by: tarcon In: Introductions, 2/9/2012, 29 replies Subject: Hello from Virginia (NOVA) Azul Diablo: Im new to the Road Star Clinic but not new to riding. Ive been living on 2 wheels since 2005. My first bike was a Honda VTX 1300C it was a very good bike until I test rode a 2005 Yamaha Road Star Midnight ... Latest reply, 2/10/2012 Paintertom40: :welcome: from Ohio Hello from Virginia (NOVA) 30 posts, last by: Paintertom40 In: Maintenance, 2/10/2012, 11 replies Subject: Ignition switch and battery ???? BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ... Latest reply, 2/10/2012 BEAMS123: Erb I got the starter and rectifier But what was the other. Thanks to all for the advice.Ignition switch and battery ???? 12 posts, last by: BEAMS123 In: Maintenance, 2/10/2012, 8 replies Subject: Lithium Soap? About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ... Latest reply, 2/10/2012 About_Time: Excellent question. I guess that's part of what I was hoping to get answered....are there any ...Lithium Soap? 9 posts, last by: About_Time In: Bike Talk, 2/10/2012, 13 replies Subject: front springs Cody: Well i ordered the progessive.springs for the front . So i figured id get started on makeing the spacers. Can anyone tell me what size they need to be thickness amd how long thanks guys Latest reply, 2/10/2012 TheGrinder: I just got done installing the progressive springs in my forks... and yes, thy done come with the washers ...front springs 14 posts, last by: TheGrinder In: Bike Talk, 2/10/2012, 7 replies Subject: Waht Tires do you ride??? ear3: Latest reply, 2/10/2012 jd750ace: Michelin Commanders right now. will go with Commander 2 when these are gone. 11,000 miles on last set ...Waht Tires do you ride??? 8 posts, last by: jd750ace In: Miscellaneous, 2/10/2012, 1 reply Subject: selling my 07 cast wheels...help ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market? Latest reply, 2/10/2012 smokescreens: I sold my cast wheels with rotors and front calipers for close to $600 shiped as a package deal. I think ...selling my 07 cast wheels...help 2 posts, last by: smokescreens In: Body/Frame, 2/8/2012, 18 replies Subject: shifter mod dvblair: Has anyone cut off the heel portion of the shifter? I never use it and would like to have the extra room. I would like to remove it but it looks like you would need a spacer on the shaft and I'm not sure ... Latest reply, 2/10/2012 Tug: Yup I did the same thing. It was my first mod actuallyshifter mod 19 posts, last by: Tug In: Miscellaneous, 2/10/2012, 2 replies Subject: Intake Manifold SaltyJack: :( I've been having thoughts of having a intake manifold modified and I saw one on ebay for $35, used. I enlarged the picture and it looked severely cracked to me so I asked "the" question. Why put something ... Latest reply, 2/10/2012 MS1700: I have one of Curts and of about 5, it was the only one that did not leak and worked like a charm. Practice ...Intake Manifold 3 posts, last by: MS1700 In: Bolt Ons, 2/9/2012, 7 replies Subject: WTB Royal Star Hard Saddlebag mounting brackets ajbonner: Let me know if you have the above. Dont want the trim brackets, just the mounting brackets. Thanks Latest reply, 2/10/2012 ajbonner: thanks scottoWTB Royal Star Hard Saddlebag mounting brackets 8 posts, last by: ajbonner In: Maintenance, 2/10/2012, 6 replies Subject: Throtle return rate espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ... Latest reply, 2/10/2012 JEastonjr: I had that problem and the cable adjustment was too tight. check the adjustment at the carb.Throtle return rate 7 posts, last by: JEastonjr In: Jetting, 2/9/2012, 10 replies Subject: RuNning rich Plumbwader: What r signs of running rich without reading the plugs? Latest reply, 2/10/2012 Curt: FI bikes are controlled by the ECU and the 02 sensors so they will be richer than a carb bike. Even a ...RuNning rich 11 posts, last by: Curt In: Bolt Ons, 2/10/2012, 2 replies Subject: Floorboard Extensions Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob Latest reply, 2/10/2012 chrisxv1600al: Rob... I did this to mine and used a couple pieces of smaller square tubing. It was either 1" or 1 1/4" ...Floorboard Extensions 3 posts, last by: chrisxv1600al In: Bike Talk, 2/4/2012, 54 replies Subject: Is RoadStar S too Big For Me? Female Rider Asking azalearider: Hi, New to the site and this is my first thread. Looking for some advice. I'm a female rider - about 130 pounds and 5'5". My first purchase was 400cc bike - which I rode for 7 years. Then moved on ... Latest reply, 2/10/2012 masterhermit: its definitely a big bike and you will have to get use to it............. in fact its a huge bike, center ...Is RoadStar S too Big For Me? Female Rider Asking 55 posts, last by: masterhermit In: Introductions, 2/9/2012, 30 replies Subject: Hello Ya'll ShadowsDad: Hey names Jeremiah, Been riding 5 years now, my first bike was a 06'shadow Aero 750. Loved that bike.after having ridden my father-in-laws Roadstar I realized I needed a bigger bike.I liked the way it ... Latest reply, 2/10/2012 huskerbob: :welcome: Hello Ya'll 31 posts, last by: huskerbob In: Introductions, 2/5/2012, 30 replies Subject: New to RSC ear3: Need, Front Forks, Light Bar, Windshield & Supports, Rear Master Cylinder THX Latest reply, 2/10/2012 ear3: Thanks guys, can I get all your favorite tires you like to ride, especially for long ridesNew to RSC 31 posts, last by: ear3 In: Bolt Ons, 2/9/2012, 7 replies Subject: Front wheel ring signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers. Latest reply, 2/10/2012 EddieDe: How bad were the mods ?Front wheel ring 8 posts, last by: EddieDe In: Bolt Ons, 2/10/2012, 4 replies Subject: Removing passing lights azbto: 1700 midnight star with yamaha passing lamps, i want to clean up the front a bit and am contemplating removing the passing light bar but see the front of the headlight is supported by the bar. Does anybody ... Latest reply, 2/10/2012 Curt: Think you can put a spacer in place of it but if you want to cut up a light bar I have just the regular ...Removing passing lights 5 posts, last by: Curt In: Bolt Ons, 2/8/2012, 12 replies Subject: Another Grip Question azbto: Ok, just got a new set of bars for my '05 1700, they are heritage bars... when I took them off discovered the oem bars have end weights that I cant reuse with the new bars. So I am in the market for new ... Latest reply, 2/10/2012 cartersta: mine dont have the weights in them, these are heratige bars!!with iso gripsAnother Grip Question 13 posts, last by: cartersta In: Miscellaneous, 2/9/2012, 5 replies Subject: Metric Magic Plumbwader: Anyone have a good email addy for metric magic. I keep getting mailer daemons. Im trying to get a price on some stainless cables for my new apes? B) ill take suggestions about other places to contact ... Latest reply, 2/10/2012 gfolkert: I sent him an order for new brake pads (3 sets, 2 for front, 1 for rear) for my wife's bike. I ...Metric Magic 6 posts, last by: gfolkert In: Bike Talk, 2/8/2012, 14 replies Subject: Is this a fair price? azalearider: 2009 Road Star S 0 Miles - Left Over that hasn't sold. $9100 Thanks! Latest reply, 2/10/2012 BubbaKahuna: We have one at my work, brand new 2009 Roadstar in Candy Red for $8895 out the door if sold outside Wisconsin. ...Is this a fair price? 15 posts, last by: BubbaKahuna In: Electrical/Electronics, 2/1/2012, 9 replies Subject: starter problems Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear Latest reply, 2/10/2012 Papa Bear: :) Just reporting back. After checking all of the recommendatoins(thank you all)it turns out that the ...starter problems 10 posts, last by: Papa Bear In: Miscellaneous, 2/9/2012, 6 replies Subject: cool sidecars roadiemort: http://sn116w.snt116.mail.live.com/default.aspx#n=1355430984&fid=1&fav=1&mid=6819fbbb-5335-11e1-9077-00215ad80c0e&fv=1 Latest reply, 2/10/2012 Tug: now those are cool B) B)cool sidecars 7 posts, last by: Tug In: Pics of My Ride, 1/28/2012, 32 replies Subject: I'm back with a new toy!! Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ... Latest reply, 2/10/2012 Keeb: They are made by Corbin. Some of the best looking bags for our bikes in my opinion, but make sure you ...I'm back with a new toy!! 33 posts, last by: Keeb In: Maintenance, 2/7/2012, 4 replies Subject: Annual Maintenancee kb20682003: Hey guys here is a question for you EXPERTS!!! I bought a 2003 Silverado a year ago, put about 1K on it... what Annual Maintenance should I do?? not just change oil but which nuts n bolts need to be checked ... Latest reply, 2/10/2012 kb20682003: Thanks guys,,, much appreciated :PAnnual Maintenancee 5 posts, last by: kb20682003 In: Jetting, 2/6/2012, 15 replies Subject: Running Rich I think... XrayJ: Hi guys, I've been reading through these jetting posts for days now, thanks for all the info so far! Here's the situation, first of all let me say this is the first carb I've ever taken apart. I crossed ... Latest reply, 2/10/2012 smokescreens: There are a couple of things I haven't seen mentioned. 1. Has the float level been checked? and ...Running Rich I think... 16 posts, last by: smokescreens In: Bike Talk, 2/8/2012, 9 replies Subject: Need help installing fairing speakers!!! kryinggame: Hey gang, I have the Kuryakyn Sportech fairing installed and I just bought the stereo speakers. I'm trying to decide if I should have my mod guy install the speakers or should I attempt to do teh work ... Latest reply, 2/10/2012 rphazen: It would would be whatever the 4 pin relay is. Just needs a ground,trigger, hot from battery ...Need help installing fairing speakers!!! 10 posts, last by: rphazen

New Forum Posts

In: Bike Talk, 2/10/2012, 20 replies
Subject: this road star is to cool!!!
smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow

Latest reply, 2/10/2012
Edge51: very nice..but not my cup of tea...just sayinthis road star is to cool!!!

21 posts, last by:

Edge51

In: Introductions, 2/10/2012, 28 replies
Subject: hello all
DON1989: I bought me a 2008 road star silverado 1700 on new years day road it home about 18 miles when it was about 35 outside and still loved it!!! also pretty excited about finding this site

Latest reply, 2/10/2012
Paintertom40: hello from Ohio hello all

29 posts, last by:

Paintertom40

In: Bike Talk, 2/10/2012, 2 replies
Subject: Fairing and tour trunk ideas
Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom

Latest reply, 2/10/2012
tarcon: I have the matuza. I like it fine. There are more expensive ones out there. This one fits my needs and ...Fairing and tour trunk ideas

3 posts, last by:

tarcon

In: Non Motorcycle Topics, 2/10/2012, 3 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...

Latest reply, 2/10/2012
tarcon: Nice boots. Milwaukee is a good choice.Got my new boots!

4 posts, last by:

tarcon

In: Introductions, 2/9/2012, 29 replies
Subject: Hello from Virginia (NOVA)
Azul Diablo: Im new to the Road Star Clinic but not new to riding. Ive been living on 2 wheels since 2005. My first bike was a Honda VTX 1300C it was a very good bike until I test rode a 2005 Yamaha Road Star Midnight ...

Latest reply, 2/10/2012
Paintertom40: :welcome: from Ohio Hello from Virginia (NOVA)

30 posts, last by:

Paintertom40

In: Maintenance, 2/10/2012, 11 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...

Latest reply, 2/10/2012
BEAMS123: Erb I got the starter and rectifier But what was the other. Thanks to all for the advice.Ignition switch and battery ????

12 posts, last by:

BEAMS123

In: Maintenance, 2/10/2012, 8 replies
Subject: Lithium Soap?
About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ...

Latest reply, 2/10/2012
About_Time: Excellent question. I guess that's part of what I was hoping to get answered....are there any ...Lithium Soap?

9 posts, last by:

About_Time

In: Bike Talk, 2/10/2012, 13 replies
Subject: front springs
Cody: Well i ordered the progessive.springs for the front . So i figured id get started on makeing the spacers. Can anyone tell me what size they need to be thickness amd how long thanks guys

Latest reply, 2/10/2012
TheGrinder: I just got done installing the progressive springs in my forks... and yes, thy done come with the washers ...front springs

14 posts, last by:

TheGrinder

In: Bike Talk, 2/10/2012, 7 replies
Subject: Waht Tires do you ride???
ear3:

Latest reply, 2/10/2012
jd750ace: Michelin Commanders right now. will go with Commander 2 when these are gone. 11,000 miles on last set ...Waht Tires do you ride???

8 posts, last by:

jd750ace

In: Miscellaneous, 2/10/2012, 1 reply
Subject: selling my 07 cast wheels...help
ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market?

Latest reply, 2/10/2012
smokescreens: I sold my cast wheels with rotors and front calipers for close to $600 shiped as a package deal. I think ...selling my 07 cast wheels...help

2 posts, last by:

smokescreens

In: Body/Frame, 2/8/2012, 18 replies
Subject: shifter mod
dvblair: Has anyone cut off the heel portion of the shifter? I never use it and would like to have the extra room. I would like to remove it but it looks like you would need a spacer on the shaft and I'm not sure ...

Latest reply, 2/10/2012
Tug: Yup I did the same thing. It was my first mod actuallyshifter mod

19 posts, last by:

Tug

In: Miscellaneous, 2/10/2012, 2 replies
Subject: Intake Manifold
SaltyJack: :( I've been having thoughts of having a intake manifold modified and I saw one on ebay for $35, used. I enlarged the picture and it looked severely cracked to me so I asked "the" question. Why put something ...

Latest reply, 2/10/2012
MS1700: I have one of Curts and of about 5, it was the only one that did not leak and worked like a charm. Practice ...Intake Manifold

3 posts, last by:

MS1700

In: Bolt Ons, 2/9/2012, 7 replies
Subject: WTB Royal Star Hard Saddlebag mounting brackets
ajbonner: Let me know if you have the above. Dont want the trim brackets, just the mounting brackets. Thanks

Latest reply, 2/10/2012
ajbonner: thanks scottoWTB Royal Star Hard Saddlebag mounting brackets

8 posts, last by:

ajbonner

In: Maintenance, 2/10/2012, 6 replies
Subject: Throtle return rate
espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ...

Latest reply, 2/10/2012
JEastonjr: I had that problem and the cable adjustment was too tight. check the adjustment at the carb.Throtle return rate

7 posts, last by:

JEastonjr

In: Jetting, 2/9/2012, 10 replies
Subject: RuNning rich
Plumbwader: What r signs of running rich without reading the plugs?

Latest reply, 2/10/2012
Curt: FI bikes are controlled by the ECU and the 02 sensors so they will be richer than a carb bike. Even a ...RuNning rich

11 posts, last by:

Curt

In: Bolt Ons, 2/10/2012, 2 replies
Subject: Floorboard Extensions
Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob

Latest reply, 2/10/2012
chrisxv1600al: Rob... I did this to mine and used a couple pieces of smaller square tubing. It was either 1" or 1 1/4" ...Floorboard Extensions

3 posts, last by:

chrisxv1600al

In: Bike Talk, 2/4/2012, 54 replies
Subject: Is RoadStar S too Big For Me? Female Rider Asking
azalearider: Hi, New to the site and this is my first thread. Looking for some advice. I'm a female rider - about 130 pounds and 5'5". My first purchase was 400cc bike - which I rode for 7 years. Then moved on ...

Latest reply, 2/10/2012
masterhermit: its definitely a big bike and you will have to get use to it............. in fact its a huge bike, center ...Is RoadStar S too Big For Me? Female Rider Asking

55 posts, last by:

masterhermit

In: Introductions, 2/9/2012, 30 replies
Subject: Hello Ya'll
ShadowsDad: Hey names Jeremiah, Been riding 5 years now, my first bike was a 06'shadow Aero 750. Loved that bike.after having ridden my father-in-laws Roadstar I realized I needed a bigger bike.I liked the way it ...

Latest reply, 2/10/2012
huskerbob: :welcome: Hello Ya'll

31 posts, last by:

huskerbob

In: Introductions, 2/5/2012, 30 replies
Subject: New to RSC
ear3: Need, Front Forks, Light Bar, Windshield & Supports, Rear Master Cylinder THX

Latest reply, 2/10/2012
ear3: Thanks guys, can I get all your favorite tires you like to ride, especially for long ridesNew to RSC

31 posts, last by:

ear3

In: Bolt Ons, 2/9/2012, 7 replies
Subject: Front wheel ring
signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers.

Latest reply, 2/10/2012
EddieDe: How bad were the mods ?Front wheel ring

8 posts, last by:

EddieDe

In: Bolt Ons, 2/10/2012, 4 replies
Subject: Removing passing lights
azbto: 1700 midnight star with yamaha passing lamps, i want to clean up the front a bit and am contemplating removing the passing light bar but see the front of the headlight is supported by the bar. Does anybody ...

Latest reply, 2/10/2012
Curt: Think you can put a spacer in place of it but if you want to cut up a light bar I have just the regular ...Removing passing lights

5 posts, last by:

Curt

In: Bolt Ons, 2/8/2012, 12 replies
Subject: Another Grip Question
azbto: Ok, just got a new set of bars for my '05 1700, they are heritage bars... when I took them off discovered the oem bars have end weights that I cant reuse with the new bars. So I am in the market for new ...

Latest reply, 2/10/2012
cartersta: mine dont have the weights in them, these are heratige bars!!with iso gripsAnother Grip Question

13 posts, last by:

cartersta

In: Miscellaneous, 2/9/2012, 5 replies
Subject: Metric Magic
Plumbwader: Anyone have a good email addy for metric magic. I keep getting mailer daemons. Im trying to get a price on some stainless cables for my new apes? B) ill take suggestions about other places to contact ...

Latest reply, 2/10/2012
gfolkert: I sent him an order for new brake pads (3 sets, 2 for front, 1 for rear) for my wife's bike. I ...Metric Magic

6 posts, last by:

gfolkert

In: Bike Talk, 2/8/2012, 14 replies
Subject: Is this a fair price?
azalearider: 2009 Road Star S 0 Miles - Left Over that hasn't sold. $9100 Thanks!

Latest reply, 2/10/2012
BubbaKahuna: We have one at my work, brand new 2009 Roadstar in Candy Red for $8895 out the door if sold outside Wisconsin. ...Is this a fair price?

15 posts, last by:

BubbaKahuna

In: Electrical/Electronics, 2/1/2012, 9 replies
Subject: starter problems
Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear

Latest reply, 2/10/2012
Papa Bear: :) Just reporting back. After checking all of the recommendatoins(thank you all)it turns out that the ...starter problems

10 posts, last by:

Papa Bear

In: Miscellaneous, 2/9/2012, 6 replies
Subject: cool sidecars
roadiemort: http://sn116w.snt116.mail.live.com/default.aspx#n=1355430984&fid=1&fav=1&mid=6819fbbb-5335-11e1-9077-00215ad80c0e&fv=1

Latest reply, 2/10/2012
Tug: now those are cool B) B)cool sidecars

7 posts, last by:

Tug

In: Pics of My Ride, 1/28/2012, 32 replies
Subject: I'm back with a new toy!!
Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ...

Latest reply, 2/10/2012
Keeb: They are made by Corbin. Some of the best looking bags for our bikes in my opinion, but make sure you ...I'm back with a new toy!!

33 posts, last by:

Keeb

In: Maintenance, 2/7/2012, 4 replies
Subject: Annual Maintenancee
kb20682003: Hey guys here is a question for you EXPERTS!!! I bought a 2003 Silverado a year ago, put about 1K on it... what Annual Maintenance should I do?? not just change oil but which nuts n bolts need to be checked ...

Latest reply, 2/10/2012
kb20682003: Thanks guys,,, much appreciated :PAnnual Maintenancee

5 posts, last by:

kb20682003

In: Jetting, 2/6/2012, 15 replies
Subject: Running Rich I think...
XrayJ: Hi guys, I've been reading through these jetting posts for days now, thanks for all the info so far! Here's the situation, first of all let me say this is the first carb I've ever taken apart. I crossed ...

Latest reply, 2/10/2012
smokescreens: There are a couple of things I haven't seen mentioned. 1. Has the float level been checked? and ...Running Rich I think...

16 posts, last by:

smokescreens

In: Bike Talk, 2/8/2012, 9 replies
Subject: Need help installing fairing speakers!!!
kryinggame: Hey gang, I have the Kuryakyn Sportech fairing installed and I just bought the stereo speakers. I'm trying to decide if I should have my mod guy install the speakers or should I attempt to do teh work ...

Latest reply, 2/10/2012
rphazen: It would would be whatever the 4 pin relay is. Just needs a ground,trigger, hot from battery ...Need help installing fairing speakers!!!

10 posts, last by:

rphazen

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.