I kinda feel like I am gonna get a butt whippin from you guys on this, but I was bored one night and was looking on ebay and came across this Genesis Performance Module from http://www.genesisperformancemodules.com/ So i picked it up for $30.00 in hopes that it will work atleast some what to the supposed claims. But as an F-16 Mechanic, I am not familiar with the instructions. First off, it says to lacocate my INTAKE AIR TEMP SENSOR (2 wires). If there is (4 wires) or a MAP SENSOR then i must locate my COOLANT TEMP SENSOR. Which one do we have?????? Then it says to take the black wire from the Genesis Mod and connect it to any one of the 2 wires on the bikes sensor. Then take the blue wire and connect it to the remaining sensor wire. But, it says if the machine that i am installing the mod on only has 1 sensor wire instead of 2, then I must cut the sensor wire and connect the black wire from the Genesis Performance Mod on the sensor side of the cut wire and connect the blue wire of the Genesis Mod to the other end of the cut sensor wire??????? Please help me feel stupid