Re:Emissions testing - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

General

Bike Talk

Emissions testing

Favoured: 0

TOPIC: Emissions testing

Forum Tools

#31171

Charlie Horse (User)

Junior Boarder

Posts: 194

Emissions testing 4 Years, 11 Months ago
Just wanted to start a new subject I'm not seeing anywhere. To us poor folks here in California (and coming to a state near you), there's a strong chance the state will require smog tests starting in 2010. I don't think our R*'s have cats, but from what I'm reading on the ARB web site, they will be checking for evap controls and AIS being in place. Does anybody know what they check in AZ?

Logged

Charlie Horse

It only hurts when I laugh!!!

The administrator has disabled public write access.

#31201

chevmec1 (User)

Fresh Boarder

Posts: 3

Re:Emissions testing 4 Years, 11 Months ago
Only certain parts of AZ get emission checked, around Flagstaff, Tucson, Maricopa county and parts of Pinal county. I ran my 2000 Road* through without AIS and the only test they did was an idle check at the tailpipe. And the standards are very laxed for bikes compared to cares. Good Luck

Logged

The administrator has disabled public write access.

#31246

Charlie Horse (User)

Junior Boarder

Posts: 194

Re:Emissions testing 4 Years, 11 Months ago

I'm just getting a little nervous cause CA lawmakers have a bad tendency to go overboard with their emission laws. There are over 400,000 registered motorcycles in CA and over 60% have "tampered exhaust systems". According the the latest bill though, AB 829, they are finally going to allow CARB approved modifications as long as all the emission controls are in place with means you can run aftermarket intake, but if the bike is equipped with a cat, it must still retain a cat. This is one of the reasons that I've been reluctant to sell my take-off parts

. Am I just being paranoid???

Logged

Charlie Horse

It only hurts when I laugh!!!

The administrator has disabled public write access.

#31252

Roadkill1962 (User)

ΜΟΛΩΝ ΛΑΒΕ

Platinum Boarder

Posts: 3213

Re:Emissions testing 4 Years, 11 Months ago
I grew up in California, and have lived there twice since. I'm never going back. You can't be too paranoid about what's gonna be regulated next in the People's Republic of California, comrade... My two cents ($2.13 after California taxes added... ) RK

Logged

“To compel a man to subsidize with his taxes the propagation of ideas which he disbelieves and abhors is sinful and tyrannical.” - Thomas Jefferson

The administrator has disabled public write access.

Forum List

General

Bike Talk

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Non Motorcycle Topics, 5/27/2012, 6 replies Subject: It's 3:00 am ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh: Latest reply, 5/27/2012 Mudslide: Thinking about riding out to a overlook somewhere and watch the sun come up. But I might burst onto flames.It's 3:00 am 7 posts, last by: Mudslide In: Bike Talk, 5/26/2012, 12 replies Subject: Road trip tool kit About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ... Latest reply, 5/27/2012 HEAVY METAL: A list of hookers phone numbers in case I break down and have to buy one!!;)Road trip tool kit 13 posts, last by: HEAVY METAL In: Technical Discussions, 5/26/2012, 12 replies Subject: advice on tail bags for a road trip. smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ... Latest reply, 5/27/2012 HEAVY METAL: It is usually #6 that makes us late,or a no show.Yes Dear....your outfit looks great..........let's go!advice on tail bags for a road trip. 13 posts, last by: HEAVY METAL In: Non Motorcycle Topics, 5/25/2012, 23 replies Subject: I'm Torn Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ... Latest reply, 5/27/2012 HEAVY METAL: You need to talk her into buying her a V-star,(A boat is a hole in the water that you poor money into.)(quote)POOR ...I'm Torn 24 posts, last by: HEAVY METAL In: Introductions, 5/26/2012, 20 replies Subject: Hello from the Region kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it. Latest reply, 5/27/2012 HEAVY METAL: WELCOME TO THE CLINIC!Hello from the Region 21 posts, last by: HEAVY METAL In: Technical Discussions, 5/26/2012, 2 replies Subject: where does the hoses go? zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ... Latest reply, 5/27/2012 zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go? 3 posts, last by: zulu In: Website General, 5/27/2012, 1 reply Subject: Members by location. Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ... Latest reply, 5/27/2012 HEAVY METAL: +1 HEAVY METAL WARRENTON,MISSOURIMembers by location. 2 posts, last by: HEAVY METAL In: Miscellaneous, 5/26/2012, 12 replies Subject: this clinic has shown its true greatness yet again smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ... Latest reply, 5/27/2012 HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again 13 posts, last by: HEAVY METAL In: Non Motorcycle Topics, 5/26/2012, 16 replies Subject: Thank you, all who served. fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny) Latest reply, 5/27/2012 HEAVY METAL: Thank you for your sacrifice for our freedom,Be it your time or the fallen brothers who stood beside ...Thank you, all who served. 17 posts, last by: HEAVY METAL In: Electrical/Electronics, 5/26/2012, 13 replies Subject: So much for simple bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ... Latest reply, 5/27/2012 Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple 14 posts, last by: Mudslide In: Electrical/Electronics, 5/26/2012, 2 replies Subject: Solar Pulse Battery Energy Power Charger? Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ... Latest reply, 5/27/2012 Ricohoc: Solar Pulse Battery Energy Power Charger? 3 posts, last by: Ricohoc In: Tech Tips, 5/26/2012, 6 replies Subject: Engine teardown video gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ... Latest reply, 5/27/2012 Spydr: Helps to see it done at least once, right?Engine teardown video 7 posts, last by: Spydr In: Bike Talk, 5/27/2012 Subject: Road Star Ride Tomorrow Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ... Road Star Ride Tomorrow new topic by: Stevie In: Bike Talk, 5/21/2012, 41 replies Subject: I have gone to the Darkside... TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ... Latest reply, 5/27/2012 Mudslide: Just about any brand of tube should be OK. Just get the size range for the size tire you'll be ...I have gone to the Darkside... 42 posts, last by: Mudslide In: Bolt Ons, 5/24/2012, 13 replies Subject: Do I really need push & pull cables? DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James Latest reply, 5/27/2012 Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables? 14 posts, last by: Booster In: Bike Talk, 5/8/2012, 37 replies Subject: My Project FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ... Latest reply, 5/26/2012 Tug: congratsMy Project 38 posts, last by: Tug In: Maintenance, 5/25/2012, 12 replies Subject: I messed up the Barnett conversion some how espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ... Latest reply, 5/26/2012 Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how 13 posts, last by: Greysnake In: Miscellaneous, 5/26/2012, 11 replies Subject: Let the summer begin...(not quite) h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ... Latest reply, 5/26/2012 blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite) 12 posts, last by: blue star In: Rides, Meets, Events, 3/16/2012, 99 replies Subject: Central M&G, 2012 June 29,30, and July 1 fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ... Latest reply, 5/26/2012 Greysnake: Damn,it'd be worth flying up there to help:laugh: :laugh:Central M&G, 2012 June 29,30, and July 1 100 posts, last by: Greysnake In: Electrical/Electronics, 5/25/2012, 17 replies Subject: Rear tail/brake light lens FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ... Latest reply, 5/26/2012 brown91redcam: LEDs look good nice job!Rear tail/brake light lens 18 posts, last by: brown91redcam In: Bolt Ons, 5/26/2012, 9 replies Subject: New Handlebars - Stock Grips? alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ... Latest reply, 5/26/2012 Curt: You want the lowest prices on Kury stuff the go to this site. E-mail Glen and tell him Curt sent you ...New Handlebars - Stock Grips? 10 posts, last by: Curt In: Introductions, 5/24/2012, 35 replies Subject: Hello from Kentucky myxlr: nice to be here i ride a 2008 silverado Latest reply, 5/26/2012 Edge51: from B.C. Hello from Kentucky 36 posts, last by: Edge51 In: Miscellaneous, 4/19/2012, 8 replies Subject: Hey Stevie... OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh: Latest reply, 5/26/2012 Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie... 9 posts, last by: Edge51 In: Maintenance, 5/25/2012, 15 replies Subject: Brake pads slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA! Latest reply, 5/26/2012 mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads 16 posts, last by: mkayx In: Bike Talk, 5/26/2012, 14 replies Subject: Changing the shock spring Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press? Latest reply, 5/26/2012 Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring 15 posts, last by: Edge51 In: Bolt Ons, 5/26/2012, 19 replies Subject: Flag mounts for 6"x9" Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them? Latest reply, 5/26/2012 Curt: A copper tube or pipe just big enough to hold the flag pole with a copper cap soldered on the end of ...Flag mounts for 6"x9" 20 posts, last by: Curt In: Miscellaneous, 5/24/2012, 41 replies Subject: Opinion about studs rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ... Latest reply, 5/26/2012 ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs 42 posts, last by: ozarkpreacher In: Miscellaneous, 5/26/2012 Subject: RoadHog75 you have a private message. gfolkert: You have a private message from me. Thanks. RoadHog75 you have a private message. new topic by: gfolkert In: Rides, Meets, Events, 3/1/2012, 133 replies Subject: Memorial Day Weekend Gathering Arundel Maine drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ... Latest reply, 5/26/2012 Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine 134 posts, last by: Questcap In: Bolt Ons, 5/25/2012, 24 replies Subject: Front Pulley Question - XV1600 vs XV1700 TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ... Latest reply, 5/26/2012 Erbman02: It fits. Grumpy (Jay) from rsr forum has it on his 1700. been running it for a while.Front Pulley Question - XV1600 vs XV1700 25 posts, last by: Erbman02

New Forum Posts

In: Non Motorcycle Topics, 5/27/2012, 6 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:

Latest reply, 5/27/2012
Mudslide: Thinking about riding out to a overlook somewhere and watch the sun come up. But I might burst onto flames.It's 3:00 am

7 posts, last by:

Mudslide

In: Bike Talk, 5/26/2012, 12 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...

Latest reply, 5/27/2012
HEAVY METAL: A list of hookers phone numbers in case I break down and have to buy one!!;)Road trip tool kit

13 posts, last by:

HEAVY METAL

In: Technical Discussions, 5/26/2012, 12 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...

Latest reply, 5/27/2012
HEAVY METAL: It is usually #6 that makes us late,or a no show.Yes Dear....your outfit looks great..........let's go!advice on tail bags for a road trip.

13 posts, last by:

HEAVY METAL

In: Non Motorcycle Topics, 5/25/2012, 23 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...

Latest reply, 5/27/2012
HEAVY METAL: You need to talk her into buying her a V-star,(A boat is a hole in the water that you poor money into.)(quote)POOR ...I'm Torn

24 posts, last by:

HEAVY METAL

In: Introductions, 5/26/2012, 20 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/27/2012
HEAVY METAL: WELCOME TO THE CLINIC!Hello from the Region

21 posts, last by:

HEAVY METAL

In: Technical Discussions, 5/26/2012, 2 replies
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...

Latest reply, 5/27/2012
zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go?

3 posts, last by:

zulu

In: Website General, 5/27/2012, 1 reply
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...

Latest reply, 5/27/2012
HEAVY METAL: +1 HEAVY METAL WARRENTON,MISSOURIMembers by location.

2 posts, last by:

HEAVY METAL

In: Miscellaneous, 5/26/2012, 12 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...

Latest reply, 5/27/2012
HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again

13 posts, last by:

HEAVY METAL

In: Non Motorcycle Topics, 5/26/2012, 16 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)

Latest reply, 5/27/2012
HEAVY METAL: Thank you for your sacrifice for our freedom,Be it your time or the fallen brothers who stood beside ...Thank you, all who served.

17 posts, last by:

HEAVY METAL

In: Electrical/Electronics, 5/26/2012, 13 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...

Latest reply, 5/27/2012
Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple

14 posts, last by:

Mudslide

In: Electrical/Electronics, 5/26/2012, 2 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...

Latest reply, 5/27/2012
Ricohoc: Solar Pulse Battery Energy Power Charger?

3 posts, last by:

Ricohoc

In: Tech Tips, 5/26/2012, 6 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...

Latest reply, 5/27/2012
Spydr: Helps to see it done at least once, right?Engine teardown video

7 posts, last by:

Spydr

In: Bike Talk, 5/27/2012
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...
Road Star Ride Tomorrow

new topic by:

Stevie

In: Bike Talk, 5/21/2012, 41 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...

Latest reply, 5/27/2012
Mudslide: Just about any brand of tube should be OK. Just get the size range for the size tire you'll be ...I have gone to the Darkside...

42 posts, last by:

Mudslide

In: Bolt Ons, 5/24/2012, 13 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James

Latest reply, 5/27/2012
Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables?

14 posts, last by:

Booster

In: Bike Talk, 5/8/2012, 37 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...

Latest reply, 5/26/2012
Tug: congratsMy Project

38 posts, last by:

Tug

In: Maintenance, 5/25/2012, 12 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...

Latest reply, 5/26/2012
Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how

13 posts, last by:

Greysnake

In: Miscellaneous, 5/26/2012, 11 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...

Latest reply, 5/26/2012
blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite)

12 posts, last by:

blue star

In: Rides, Meets, Events, 3/16/2012, 99 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...

Latest reply, 5/26/2012
Greysnake: Damn,it'd be worth flying up there to help:laugh: :laugh:Central M&G, 2012 June 29,30, and July 1

100 posts, last by:

Greysnake

In: Electrical/Electronics, 5/25/2012, 17 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...

Latest reply, 5/26/2012
brown91redcam: LEDs look good nice job!Rear tail/brake light lens

18 posts, last by:

brown91redcam

In: Bolt Ons, 5/26/2012, 9 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...

Latest reply, 5/26/2012
Curt: You want the lowest prices on Kury stuff the go to this site. E-mail Glen and tell him Curt sent you ...New Handlebars - Stock Grips?

10 posts, last by:

Curt

In: Introductions, 5/24/2012, 35 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado

Latest reply, 5/26/2012
Edge51: from B.C. Hello from Kentucky

36 posts, last by:

Edge51

In: Miscellaneous, 4/19/2012, 8 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:

Latest reply, 5/26/2012
Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie...

9 posts, last by:

Edge51

In: Maintenance, 5/25/2012, 15 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!

Latest reply, 5/26/2012
mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads

16 posts, last by:

mkayx

In: Bike Talk, 5/26/2012, 14 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?

Latest reply, 5/26/2012
Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring

15 posts, last by:

Edge51

In: Bolt Ons, 5/26/2012, 19 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?

Latest reply, 5/26/2012
Curt: A copper tube or pipe just big enough to hold the flag pole with a copper cap soldered on the end of ...Flag mounts for 6"x9"

20 posts, last by:

Curt

In: Miscellaneous, 5/24/2012, 41 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...

Latest reply, 5/26/2012
ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs

42 posts, last by:

ozarkpreacher

In: Miscellaneous, 5/26/2012
Subject: RoadHog75 you have a private message.
gfolkert: You have a private message from me. Thanks.
RoadHog75 you have a private message.

new topic by:

gfolkert

In: Rides, Meets, Events, 3/1/2012, 133 replies
Subject: Memorial Day Weekend Gathering Arundel Maine
drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ...

Latest reply, 5/26/2012
Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine

134 posts, last by:

Questcap

In: Bolt Ons, 5/25/2012, 24 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...

Latest reply, 5/26/2012
Erbman02: It fits. Grumpy (Jay) from rsr forum has it on his 1700. been running it for a while.Front Pulley Question - XV1600 vs XV1700

25 posts, last by:

Erbman02

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.