Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum General Bike Talk
4 U with puking carbs
Go to bottom Post Reply Favoured: 0
TOPIC: 4 U with puking carbs
#344890
Curt (Moderator)
Never to old to ride!
Moderator
Posts: 12511
graphgraph
User Offline Click here to see the profile of this user
Gender: Male BlackIce
4 U with puking carbs 1 Year, 3 Months ago  
As most know I painted my tank for my 05. When I got it there was no heat shield blanket on the underside like the OEM has. Now that is painted I had to put something on it. I went to Home Depot and bought some contact cement like you use to glue laminate counter tops on with and a roll of aluminum tape that you tape your water pipes with. Use a paint brush to apply the contact cement to the under side of the tank and let it dry. Cut the aluminum tale to lengths that suit you and pill the backing off of the sticky side and lay it on the tank and smooth it out. The tape is very shiny and reflective and goes on easy. You could even apply it on top of the OEM blanket for more protection. Less heat on your gas less pressure in the tank and lines maybe no more puking but I never had that problem anyway. Tank Blanket
 
Logged Logged  
 
Last Edit: 2011/02/11 20:38 By Curt.
 
My Site

Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?
  The administrator has disabled public write access.
#344897
Greysnake (User)
I'm so far behind I think I'm first.
Platinum Boarder
Posts: 7911
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Lawrenceburg,Kentucky. Birthdate: 1951-01-00
Re:4 U with puking carbs 1 Year, 3 Months ago  
I put some of that tape over the insulation blanket undr my tank but haven't had warm enough days to see how it will work. Wrapped my fuel line with it also. Good thought about the contact cement curt,didn't think about that. If it happens to start peeling off I'll do that.
 
Logged Logged  
 


06 Midnight Silverado
*nothing shines like a star*
  The administrator has disabled public write access.
#344958
Starkruzen (User)
Starkruzen
Platinum Boarder
Posts: 1460
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: West Palm Beach, Florida Birthdate: 1957-00-00
Re:4 U with puking carbs 1 Year, 3 Months ago  
Doesn't the "pressure" excape through the vent hose on top of the tank? I never hear the "hiss" of pressure when I open the gas tank???
 
Logged Logged  
  The administrator has disabled public write access.
#344976
greenpus (User)
Platinum Boarder
Posts: 1674
graphgraph
User Offline Click here to see the profile of this user
Re:4 U with puking carbs 1 Year, 3 Months ago  
My 2001 doesn't have a heat shield on the belly of the tank
 
Logged Logged  
  The administrator has disabled public write access.
#344996
Curt (Moderator)
Never to old to ride!
Moderator
Posts: 12511
graphgraph
User Offline Click here to see the profile of this user
Gender: Male BlackIce
Re:4 U with puking carbs 1 Year, 3 Months ago  
Yes the pressure can exit by the vent but that is small and if the rollover valve doesn't work properly the heat can build up pressure. It may be that only the BLACK R* tanks have the blanket on them or the newer models. That may be Yami way of stopping carb puking.
 
Logged Logged  
 
My Site

Black Ice is Shiny, Black Ice is Deadly, Ya Wanna Ride My BlackIce?
  The administrator has disabled public write access.
#345030
texasscott1 (User)
Two of a kind
Platinum Boarder
Posts: 1824
graphgraph
User Offline Click here to see the profile of this user
Gender: Male
Re:4 U with puking carbs 1 Year, 3 Months ago  
Good idea. Mine doesn't have anything under there and I've noticed the fuel in the tank can get pretty warm on a hot day.
 
Logged Logged  
 


My 99 Standard Test Mule
Scott B.
  The administrator has disabled public write access.
#345031
Blackroadie (User)
Sometimes I wish you were a pinata !
Platinum Boarder
Posts: 4368
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Bluffton, Ohio
Re:4 U with puking carbs 1 Year, 3 Months ago  
I dont have one either curt, but thats a good idea.
 
Logged Logged  
 

04 MIDNITE SILVERADO
  The administrator has disabled public write access.
#345034
smokescreens (User)
lifes better riding twins
Platinum Boarder
Posts: 5508
graphgraph
User Online Now Click here to see the profile of this user
Gender: Male Location: harrison twp, mi Birthdate: 1982-08-26
Re:4 U with puking carbs 1 Year, 3 Months ago  
mine has that silver insulation too curt but my painter somehow pluged my vent (i think) so i did the gas cap vent thing. i would have had to anyhow when i go to a 42mm that should prevent a carb puke right? i mean i never had the problem before.
 
Logged Logged  
 
feel free to look thru my albums
http://s1222.photobucket.com/albums/dd490/jasonwoody/

email me at jasonwoody1982@yahoo.com
my 2005 midnight 1700
  The administrator has disabled public write access.
#345036
Starkruzen (User)
Starkruzen
Platinum Boarder
Posts: 1460
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: West Palm Beach, Florida Birthdate: 1957-00-00
Re:4 U with puking carbs 1 Year, 3 Months ago  
My Midnight has it
 
Logged Logged  
  The administrator has disabled public write access.
#345048
coachk (User)
Fresh Boarder
Posts: 88
graphgraph
User Offline Click here to see the profile of this user
Re:4 U with puking carbs 1 Year, 3 Months ago  
my 07 Midnight has the carb puking problem, so i guess this is something I can try... Anything else that will help it?
 
Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Bike Talk, 5/26/2012, 13 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/27/2012
Ricohoc: :)Road trip tool kit
14 posts, last by:
Ricohoc
In: Non Motorcycle Topics, 5/27/2012, 6 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:
Latest reply, 5/27/2012
Mudslide: Thinking about riding out to a overlook somewhere and watch the sun come up. But I might burst onto flames.It's 3:00 am
7 posts, last by:
Mudslide
In: Technical Discussions, 5/26/2012, 12 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...
Latest reply, 5/27/2012
HEAVY METAL: It is usually #6 that makes us late,or a no show.Yes Dear....your outfit looks great..........let's go!advice on tail bags for a road trip.
13 posts, last by:
HEAVY METAL
In: Non Motorcycle Topics, 5/25/2012, 23 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/27/2012
HEAVY METAL: You need to talk her into buying her a V-star,(A boat is a hole in the water that you poor money into.)(quote)POOR ...I'm Torn
24 posts, last by:
HEAVY METAL
In: Introductions, 5/26/2012, 20 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/27/2012
HEAVY METAL: WELCOME TO THE CLINIC!Hello from the Region
21 posts, last by:
HEAVY METAL
In: Technical Discussions, 5/26/2012, 2 replies
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...
Latest reply, 5/27/2012
zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go?
3 posts, last by:
zulu
In: Website General, 5/27/2012, 1 reply
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...
Latest reply, 5/27/2012
HEAVY METAL: +1 HEAVY METAL WARRENTON,MISSOURIMembers by location.
2 posts, last by:
HEAVY METAL
In: Miscellaneous, 5/26/2012, 12 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...
Latest reply, 5/27/2012
HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again
13 posts, last by:
HEAVY METAL
In: Non Motorcycle Topics, 5/26/2012, 16 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)
Latest reply, 5/27/2012
HEAVY METAL: Thank you for your sacrifice for our freedom,Be it your time or the fallen brothers who stood beside ...Thank you, all who served.
17 posts, last by:
HEAVY METAL
In: Electrical/Electronics, 5/26/2012, 13 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/27/2012
Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple
14 posts, last by:
Mudslide
In: Electrical/Electronics, 5/26/2012, 2 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...
Latest reply, 5/27/2012
Ricohoc: Solar Pulse Battery Energy Power Charger?
3 posts, last by:
Ricohoc
In: Tech Tips, 5/26/2012, 6 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...
Latest reply, 5/27/2012
Spydr: Helps to see it done at least once, right?Engine teardown video
7 posts, last by:
Spydr
In: Bike Talk, 5/27/2012
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...
Road Star Ride Tomorrow
new topic by:
Stevie
In: Bike Talk, 5/21/2012, 41 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/27/2012
Mudslide: Just about any brand of tube should be OK. Just get the size range for the size tire you'll be ...I have gone to the Darkside...
42 posts, last by:
Mudslide
In: Bolt Ons, 5/24/2012, 13 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James
Latest reply, 5/27/2012
Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables?
14 posts, last by:
Booster
In: Bike Talk, 5/8/2012, 37 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...
Latest reply, 5/26/2012
Tug: congratsMy Project
38 posts, last by:
Tug
In: Maintenance, 5/25/2012, 12 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how
13 posts, last by:
Greysnake
In: Miscellaneous, 5/26/2012, 11 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite)
12 posts, last by:
blue star
In: Rides, Meets, Events, 3/16/2012, 99 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/26/2012
Greysnake: Damn,it'd be worth flying up there to help:laugh: :laugh:Central M&G, 2012 June 29,30, and July 1
100 posts, last by:
Greysnake
In: Electrical/Electronics, 5/25/2012, 17 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...
Latest reply, 5/26/2012
brown91redcam: LEDs look good nice job!Rear tail/brake light lens
18 posts, last by:
brown91redcam
In: Bolt Ons, 5/26/2012, 9 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...
Latest reply, 5/26/2012
Curt: You want the lowest prices on Kury stuff the go to this site. E-mail Glen and tell him Curt sent you ...New Handlebars - Stock Grips?
10 posts, last by:
Curt
In: Introductions, 5/24/2012, 35 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
Edge51: from B.C. Hello from Kentucky
36 posts, last by:
Edge51
In: Miscellaneous, 4/19/2012, 8 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/26/2012
Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie...
9 posts, last by:
Edge51
In: Maintenance, 5/25/2012, 15 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!
Latest reply, 5/26/2012
mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads
16 posts, last by:
mkayx
In: Bike Talk, 5/26/2012, 14 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring
15 posts, last by:
Edge51
In: Bolt Ons, 5/26/2012, 19 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/26/2012
Curt: A copper tube or pipe just big enough to hold the flag pole with a copper cap soldered on the end of ...Flag mounts for 6"x9"
20 posts, last by:
Curt
In: Miscellaneous, 5/24/2012, 41 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...
Latest reply, 5/26/2012
ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs
42 posts, last by:
ozarkpreacher
In: Miscellaneous, 5/26/2012
Subject: RoadHog75 you have a private message.
gfolkert: You have a private message from me. Thanks.
RoadHog75 you have a private message.
new topic by:
gfolkert
In: Rides, Meets, Events, 3/1/2012, 133 replies
Subject: Memorial Day Weekend Gathering Arundel Maine
drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ...
Latest reply, 5/26/2012
Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine
134 posts, last by:
Questcap
In: Bolt Ons, 5/25/2012, 24 replies
Subject: Front Pulley Question - XV1600 vs XV1700
TampaSVT: Anybody know if an XV1600 pulley will fit an XV1700? I know, sounds like a dumb question. But, here's the deal... I run that spoked pulley in the rear. It's for a wider belt than what ...
Latest reply, 5/26/2012
Erbman02: It fits. Grumpy (Jay) from rsr forum has it on his 1700. been running it for a while.Front Pulley Question - XV1600 vs XV1700
25 posts, last by:
Erbman02




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.