Re:Got a question about vibration - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

General

Bike Talk

Re:Got a question about vibration

Favoured: 0

Page:
<< Start < Prev 1 2 Next > End >>

TOPIC: Re:Got a question about vibration

Forum Tools

#504934

johna (User)

Junior Boarder

Posts: 130

Re:Got a question about vibration 11 Months ago
Cant say i have notised above the noise.I try to ignore the noise so i must ignore the vibration as well.The only thing that gets through now and then is the belt noise.Mainly when i am riding between high walls of a canyon or buildings.

Logged

The administrator has disabled public write access.

#504949

Erbman02 (User)

Platinum Boarder

Posts: 5245

Re:Got a question about vibration 11 Months ago

When I'm holding a steady speed, usually running 1800 to 2200 rpm
Even brought it down in 5th gear to 45mph, a nice thumping 14,1500rpm
Think it was 50mph in 4th was about 1900rpm. Only time I'm past 2500rpm is when hitting throttle and up shifting. I always shift in the middle of the max Tq band (2200-3200rpm). I'm running the stock 33 tooth, I have no reason to change it.

There was a chart on here yr's back, pure math to figure rpms to speed for all the available pulleys. Basically, across the mph range, each tooth equals just a bit less than 100rpm. So from a 33 to a 31, just about 200rpms higher

Logged

The administrator has disabled public write access.

Page:
<< Start < Prev 1 2 Next > End >>

Forum List

General

Bike Talk

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Non Motorcycle Topics, 5/18/2013, 36 replies Subject: Road Star Clinic Gear and Accessories? Ricohoc: Latest reply, 5/18/2013 roadiemort: http://www.cafepress.ca/+xs650+t-shirtsRoad Star Clinic Gear and Accessories? 37 posts, last by: roadiemort In: Bike Talk, 5/18/2013, 12 replies Subject: Honda Road Star! WHAT? Curt: And how do you get custom tires? Geeez he doesn't even know what bike he has.:laugh: :laugh: :laugh: :laugh: http://dallas.craigslist.org/dal/mcy/3813490717.html Latest reply, 5/18/2013 USAFretired: In todays world, a lot of folks call anything that was not factory installed "custom". The ad is no different ...Honda Road Star! WHAT? 13 posts, last by: USAFretired In: Bike Talk, 5/18/2013, 9 replies Subject: Wife Blames Me... out2lunch: Earlier this year my 18 year old bought an '06 Honda CBR600Fi4. Of course, I'm secretly thinking, great I have a regular riding buddy, but my wife has been beating my A$$ about this. It's not like ... Latest reply, 5/18/2013 Ratl: Our kids listen to us way more than most people think. Riding with you will teach him how you ride ...Wife Blames Me... 10 posts, last by: Ratl In: Non Motorcycle Topics, 5/17/2013, 8 replies Subject: Austin 400 Tigers67: Aussie V8 Supercars racing in Austin Texas this weekend if anyones interested :) :woohoo: :woohoo: Latest reply, 5/18/2013 tykesplace: Wish that I knew you were here. coulda got together for a beverage.That would have been good. ...Austin 400 9 posts, last by: tykesplace In: Pics of My Ride, 5/18/2013, 14 replies Subject: I am stoked!!! DAVECS1: Well after 4 hours of machining adjusting swearing and other various garage rolling disasters, I was rewarded for my persistence. When I sat this thing down off the lift, I just about melted. I don't know ... Latest reply, 5/18/2013 Ratl: Don't worry about the butt getting sore...it'll be a short ride without the tank. :laugh:I am stoked!!! 15 posts, last by: Ratl In: Jetting, 5/15/2013, 11 replies Subject: puff out the intake 0884dg: Ok guys it might be here already but im new so please tell me where to look. If after idling for a bit, you crack the throttle pretty hard it will puff out the intake. Sounds like and think I can kill ... Latest reply, 5/18/2013 0884dg: No intake leak so went with my gut. Got the 37.5 pilot jet and new bowl gasket. Wasvable to the set ...puff out the intake 12 posts, last by: 0884dg In: Bike Talk, 5/18/2013, 32 replies Subject: What do you think about while you are riding? mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ... Latest reply, 5/18/2013 USAFretired: I think of various things but usually it's: "Hey dumbass, learn to use your turn signal!" "Is ...What do you think about while you are riding? 33 posts, last by: USAFretired In: Technical Discussions, 5/18/2013, 9 replies Subject: Tricky Air Ride Users USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat Latest reply, 5/18/2013 USAFretired: Whitewalls ?????? Just messing with ya as I changed the pic. Thanks, I do like them on the sidecar ...Tricky Air Ride Users 10 posts, last by: USAFretired In: Body/Frame, 5/18/2013, 25 replies Subject: roadstar chop-west coast inspired Sntcareers: I have been a lurker for years, finally pulled the trigger on modding my 06 1700. I sent my stock frame off to Ardcore Choppers in Indianapolis for all the frame work. Jon was awesome to deal with and ... Latest reply, 5/18/2013 Edge51: :welcome: from B.C. Canadaroadstar chop-west coast inspired 26 posts, last by: Edge51 In: Bike Talk, 5/18/2013, 2 replies Subject: Fella almost wrecked his bike today. Martorious: We went to see the new Star Trek today. We were in Steph's Durango so she was driving. On the way home on hwy 37 south out of Martinsville which is a 4 lane divided road. Steph sees a group of three or ... Latest reply, 5/18/2013 Martorious: Ahem..yes, and as far as the movie, I liked it, though I know a lot of ST purists will cry and ...Fella almost wrecked his bike today. 3 posts, last by: Martorious In: Bike Talk, 5/18/2013, 6 replies Subject: Looking for a fairing! Warden: I bought a very rough fairing from a member here. Very rough and not something I'm going to try to salvage. The deal was legit, just more work than I want to tackle. But putting just that on the ... Latest reply, 5/18/2013 Lubama: I just got home now, it's 10:30, tomorrow I will make a list of all I have and take some pictures.Looking for a fairing! 7 posts, last by: Lubama In: Non Motorcycle Topics, 5/17/2013, 23 replies Subject: the latest crop of walmartians ultrastar: And this is why I will not step foot into a Walmart http://beartales.me/2013/01/14/the-latest-crop-of-walmartians/ Latest reply, 5/18/2013 Capt.Kirk: Never, never see that type of crap at my local Wally World. Tells us davej, what did you wear to Wal-Mart ...the latest crop of walmartians 24 posts, last by: Capt.Kirk In: Jetting, 5/15/2013, 23 replies Subject: possible carb issue phuturepharmd: Hello all. I recently bought a used 2004 roadstar xv1700. I am having an issue with the bike. When starting the bike, I turn on full choke. It starts up fine. After a couple minutes I switch to half choke. ... Latest reply, 5/18/2013 phuturepharmd: i also noted that the main jet was labeled 175. the other jets had no markings on them.possible carb issue 24 posts, last by: phuturepharmd In: Maintenance, 4/26/2013, 24 replies Subject: Moving to cast tires from spokes on a 1600 gkirk2000: Hello folks! I hope many of you have been able to get out and ride...weather up here in Toronto has been a little cold, to say the least, although I'm hoping to get out this weekend. I need to change ... Latest reply, 5/18/2013 ultrastar: wild_mac all I can say is good luck brother look at the spoke rims in the cast from At any Yamaha website ...Moving to cast tires from spokes on a 1600 25 posts, last by: ultrastar In: Electrical/Electronics, 5/14/2013, 5 replies Subject: Turn Signal Issues shane8813: I changed out all my blinkers to clear lenses and changed the bulbs out to amber.The front ones were pretty corroded and had to break the bulbs to get them out. I cleaned the contacts and replaced them ... Latest reply, 5/18/2013 Neworldman: Just had the same problem today. Replaced the front bulbs, cleaned the sockets. Had to break one to get ...Turn Signal Issues 6 posts, last by: Neworldman In: Non Motorcycle Topics, 5/18/2013, 6 replies Subject: Wife's having a yard sale Stevie: She's got a metric sht ton of stuff out there I got a ice chest of corona out there, I'm out-selling her 2 to 1 :P Latest reply, 5/18/2013 brown91redcam: Sounds like a great day for all!:laugh:Wife's having a yard sale 7 posts, last by: brown91redcam In: Non Motorcycle Topics, 5/18/2013 Subject: all day concert rib judging beer tasting sappermech: Having good time diamond REO just finishing up Benny Wilson is next.got rained on and I'm driving so no beer for me but a nice time in kingsport tn next year y'all come down its called racks by the tracks. ... all day concert rib judging beer tasting new topic by: sappermech In: Miscellaneous, 5/17/2013, 33 replies Subject: Caught in the rain Scooter76: So, I'm getting off work a little early. The entire day is some beautiful 80+ weather. I'm excited to take the bike to the BMV, which is barely 5 miles from me to get it registered. Well, silly me forgot ... Latest reply, 5/18/2013 wild_mac: nice lookin leven hundred ,have funCaught in the rain 34 posts, last by: wild_mac In: Rides, Meets, Events, 7/8/2012, 792 replies Subject: 2013 Spring M&G - Green Bay - June 7, 8 and 9 Darn: OK folks, I talked it over with Scootergirl, I think we can throw an awesome M&G here in Green Bay with a day ride up to and around Door County including some awesome rustic roads along lake Michigan (probably ... Latest reply, 5/18/2013 Darn: Gotcha ! :popcorn: :popcorn: :popcorn: :popcorn:2013 Spring M&G - Green Bay - June 7, 8 and 9 793 posts, last by: Darn In: Miscellaneous, 3/15/2013, 197 replies Subject: MOTORHEAD T-SHIRTS! Going into Production Irish_Artist: Final price is $30.00 for Short Sleeves and $36.00 For Long Sleeves I'm ordering 5 extras of the RSC Shirts left available, Let me know if you want one. _________________________________________________ Alrighty ... Latest reply, 5/18/2013 Darn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :whistle: :whistle: :whistle: :woohoo: :woohoo: ...MOTORHEAD T-SHIRTS! Going into Production 198 posts, last by: Darn In: Miscellaneous, 5/18/2013, 3 replies Subject: I like the smell* of a well tuned Roadie... Doc_V: Is it just me or does anyone else like the smell of a well tuned R? I can definitely tell when it's running rich, and I don't* like the smell of it, but I do like the smell when it's tuned right. Reminds ... Latest reply, 5/18/2013 wild_mac: mine smells of burnt gas maybe its not running right,how many turns out for the pms with jetted carb ...I like the smell of a well tuned Roadie... 4 posts, last by: wild_mac In: Rides, Meets, Events, 3/24/2013, 15 replies Subject: Saturday Rides in Southern Cali Mario: Hey guys, this past Saturday a friend and I started to highlight every road on a map of So Cal that we've been riding on our Road Stars. We did Costa Mesa 55 freeway to the 5N to the 57N up to 210W, started ... Latest reply, 5/18/2013 Mario: Sorry Swider, just saw the post. We camped out there and come back next day, next Friday going to Yosemite ...Saturday Rides in Southern Cali 16 posts, last by: Mario In: Miscellaneous, 5/18/2013, 1 reply Subject: WANTED: Raider front wheel Signguy: I'm looking for a Raider front wheel. I would appreciate any help finding one. Thanks guys Ryan Latest reply, 5/18/2013 Questcap: eBay... they're there... seen them for as little as $100.;)WANTED: Raider front wheel 2 posts, last by: Questcap In: Body/Frame, 5/18/2013, 9 replies Subject: PAINT IS DONE!!!!!! texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ... Latest reply, 5/18/2013 wild_mac: cant wait to see it :popcorn:PAINT IS DONE!!!!!! 10 posts, last by: wild_mac In: Non Motorcycle Topics, 5/17/2013, 19 replies Subject: pissed at work, dumb hilo driver >:-{ smokescreens: Damn hilo driver went fifty miles and hour into my trailor with a parts rack on his forks. Hit my bulkhead so hard he riped the front of my trailor off! Damn neck hurts now too. Latest reply, 5/18/2013 wild_mac: :laugh: that had to be some cheesy trailerpissed at work, dumb hilo driver >:-{ 20 posts, last by: wild_mac In: Bike Talk, 5/18/2013, 10 replies Subject: Carb leaking gas Chubs: After installing my new stator I started my bike and noticed fuel dumping between the cylinders. I have taken the air cleaner off and tried to find where the leak is coming from with no luck. Its not ... Latest reply, 5/18/2013 Chubs: Thanks for the help fellas. I've got the carb out I think I'll go ahead and replace the float valve and ...Carb leaking gas 11 posts, last by: Chubs In: Non Motorcycle Topics, 5/18/2013, 10 replies Subject: Finally won first place BDog: :woohoo: Finally won first place last Saturday in the Community Transportation Roadeo of New Jersey. I have bin in 2nd place for 4 straight years, and bin out to the Nationals for 4yrs. This will make ... Latest reply, 5/18/2013 BDog: thanks for the info that sound like a nice ride. still looking into maybe renting. love to see the area. ...Finally won first place 11 posts, last by: BDog In: Non Motorcycle Topics, 5/18/2013, 2 replies Subject: The Ultimate Ethnic Joke barmandr: An Englishman, a Scotsman, an Irishman, a Welshman, a Latvian, a Turk, a German, an Indian, several Americans(including a Hawaiian and an Alaskan), an Argentinean, a Dane, an Australian, a Slovak, an Egyptian, ... Latest reply, 5/18/2013 SKWEARpeg: :laugh: :laugh: A lot of work to get there... Rico will love this if he sees it.:cheer:The Ultimate Ethnic Joke 3 posts, last by: SKWEARpeg In: Bike Talk, 5/18/2013, 5 replies Subject: Burn cable Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ... Latest reply, 5/18/2013 jd750ace: You should switch back to the 10 amp fuse. If you are trying to run other stuff off the blue wire, it ...Burn cable 6 posts, last by: jd750ace In: Jetting, 5/18/2013, 12 replies Subject: Very Heavy Fuel Consumption Schweeet Daddy T: My fuel consumption is ridiculous... 17mpg and this with no mods on the bike except a half of stage one gutting of the stock pipes. I say half because I only removed the rear cone and drilled through ... Latest reply, 5/18/2013 SKWEARpeg: I think if your keeping the stock pipes, I'd do at least a stage 2(see how you like it, and you ...Very Heavy Fuel Consumption 13 posts, last by: SKWEARpeg

New Forum Posts

In: Non Motorcycle Topics, 5/18/2013, 36 replies
Subject: Road Star Clinic Gear and Accessories?
Ricohoc:

Latest reply, 5/18/2013
roadiemort: http://www.cafepress.ca/+xs650+t-shirtsRoad Star Clinic Gear and Accessories?

37 posts, last by:

roadiemort

In: Bike Talk, 5/18/2013, 12 replies
Subject: Honda Road Star! WHAT?
Curt: And how do you get custom tires? Geeez he doesn't even know what bike he has.:laugh: :laugh: :laugh: :laugh: http://dallas.craigslist.org/dal/mcy/3813490717.html

Latest reply, 5/18/2013
USAFretired: In todays world, a lot of folks call anything that was not factory installed "custom". The ad is no different ...Honda Road Star! WHAT?

13 posts, last by:

USAFretired

In: Bike Talk, 5/18/2013, 9 replies
Subject: Wife Blames Me...
out2lunch: Earlier this year my 18 year old bought an '06 Honda CBR600Fi4. Of course, I'm secretly thinking, great I have a regular riding buddy, but my wife has been beating my A$$ about this. It's not like ...

Latest reply, 5/18/2013
Ratl: Our kids listen to us way more than most people think. Riding with you will teach him how you ride ...Wife Blames Me...

10 posts, last by:

Ratl

In: Non Motorcycle Topics, 5/17/2013, 8 replies
Subject: Austin 400
Tigers67: Aussie V8 Supercars racing in Austin Texas this weekend if anyones interested :) :woohoo: :woohoo:

Latest reply, 5/18/2013
tykesplace: Wish that I knew you were here. coulda got together for a beverage.That would have been good. ...Austin 400

9 posts, last by:

tykesplace

In: Pics of My Ride, 5/18/2013, 14 replies
Subject: I am stoked!!!
DAVECS1: Well after 4 hours of machining adjusting swearing and other various garage rolling disasters, I was rewarded for my persistence. When I sat this thing down off the lift, I just about melted. I don't know ...

Latest reply, 5/18/2013
Ratl: Don't worry about the butt getting sore...it'll be a short ride without the tank. :laugh:I am stoked!!!

15 posts, last by:

Ratl

In: Jetting, 5/15/2013, 11 replies
Subject: puff out the intake
0884dg: Ok guys it might be here already but im new so please tell me where to look. If after idling for a bit, you crack the throttle pretty hard it will puff out the intake. Sounds like and think I can kill ...

Latest reply, 5/18/2013
0884dg: No intake leak so went with my gut. Got the 37.5 pilot jet and new bowl gasket. Wasvable to the set ...puff out the intake

12 posts, last by:

0884dg

In: Bike Talk, 5/18/2013, 32 replies
Subject: What do you think about while you are riding?
mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ...

Latest reply, 5/18/2013
USAFretired: I think of various things but usually it's: "Hey dumbass, learn to use your turn signal!" "Is ...What do you think about while you are riding?

33 posts, last by:

USAFretired

In: Technical Discussions, 5/18/2013, 9 replies
Subject: Tricky Air Ride Users
USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat

Latest reply, 5/18/2013
USAFretired: Whitewalls ?????? Just messing with ya as I changed the pic. Thanks, I do like them on the sidecar ...Tricky Air Ride Users

10 posts, last by:

USAFretired

In: Body/Frame, 5/18/2013, 25 replies
Subject: roadstar chop-west coast inspired
Sntcareers: I have been a lurker for years, finally pulled the trigger on modding my 06 1700. I sent my stock frame off to Ardcore Choppers in Indianapolis for all the frame work. Jon was awesome to deal with and ...

Latest reply, 5/18/2013
Edge51: :welcome: from B.C. Canadaroadstar chop-west coast inspired

26 posts, last by:

Edge51

In: Bike Talk, 5/18/2013, 2 replies
Subject: Fella almost wrecked his bike today.
Martorious: We went to see the new Star Trek today. We were in Steph's Durango so she was driving. On the way home on hwy 37 south out of Martinsville which is a 4 lane divided road. Steph sees a group of three or ...

Latest reply, 5/18/2013
Martorious: Ahem..yes, and as far as the movie, I liked it, though I know a lot of ST purists will cry and ...Fella almost wrecked his bike today.

3 posts, last by:

Martorious

In: Bike Talk, 5/18/2013, 6 replies
Subject: Looking for a fairing!
Warden: I bought a very rough fairing from a member here. Very rough and not something I'm going to try to salvage. The deal was legit, just more work than I want to tackle. But putting just that on the ...

Latest reply, 5/18/2013
Lubama: I just got home now, it's 10:30, tomorrow I will make a list of all I have and take some pictures.Looking for a fairing!

7 posts, last by:

Lubama

In: Non Motorcycle Topics, 5/17/2013, 23 replies
Subject: the latest crop of walmartians
ultrastar: And this is why I will not step foot into a Walmart http://beartales.me/2013/01/14/the-latest-crop-of-walmartians/

Latest reply, 5/18/2013
Capt.Kirk: Never, never see that type of crap at my local Wally World. Tells us davej, what did you wear to Wal-Mart ...the latest crop of walmartians

24 posts, last by:

Capt.Kirk

In: Jetting, 5/15/2013, 23 replies
Subject: possible carb issue
phuturepharmd: Hello all. I recently bought a used 2004 roadstar xv1700. I am having an issue with the bike. When starting the bike, I turn on full choke. It starts up fine. After a couple minutes I switch to half choke. ...

Latest reply, 5/18/2013
phuturepharmd: i also noted that the main jet was labeled 175. the other jets had no markings on them.possible carb issue

24 posts, last by:

phuturepharmd

In: Maintenance, 4/26/2013, 24 replies
Subject: Moving to cast tires from spokes on a 1600
gkirk2000: Hello folks! I hope many of you have been able to get out and ride...weather up here in Toronto has been a little cold, to say the least, although I'm hoping to get out this weekend. I need to change ...

Latest reply, 5/18/2013
ultrastar: wild_mac all I can say is good luck brother look at the spoke rims in the cast from At any Yamaha website ...Moving to cast tires from spokes on a 1600

25 posts, last by:

ultrastar

In: Electrical/Electronics, 5/14/2013, 5 replies
Subject: Turn Signal Issues
shane8813: I changed out all my blinkers to clear lenses and changed the bulbs out to amber.The front ones were pretty corroded and had to break the bulbs to get them out. I cleaned the contacts and replaced them ...

Latest reply, 5/18/2013
Neworldman: Just had the same problem today. Replaced the front bulbs, cleaned the sockets. Had to break one to get ...Turn Signal Issues

6 posts, last by:

Neworldman

In: Non Motorcycle Topics, 5/18/2013, 6 replies
Subject: Wife's having a yard sale
Stevie: She's got a metric sh*t ton of stuff out there I got a ice chest of corona out there, I'm out-selling her 2 to 1 :P

Latest reply, 5/18/2013
brown91redcam: Sounds like a great day for all!:laugh:Wife's having a yard sale

7 posts, last by:

brown91redcam

In: Non Motorcycle Topics, 5/18/2013
Subject: all day concert rib judging beer tasting
sappermech: Having good time diamond REO just finishing up Benny Wilson is next.got rained on and I'm driving so no beer for me but a nice time in kingsport tn next year y'all come down its called racks by the tracks. ...
all day concert rib judging beer tasting

new topic by:

sappermech

In: Miscellaneous, 5/17/2013, 33 replies
Subject: Caught in the rain
Scooter76: So, I'm getting off work a little early. The entire day is some beautiful 80+ weather. I'm excited to take the bike to the BMV, which is barely 5 miles from me to get it registered. Well, silly me forgot ...

Latest reply, 5/18/2013
wild_mac: nice lookin leven hundred ,have funCaught in the rain

34 posts, last by:

wild_mac

In: Rides, Meets, Events, 7/8/2012, 792 replies
Subject: 2013 Spring M&G - Green Bay - June 7, 8 and 9
Darn: OK folks, I talked it over with Scootergirl, I think we can throw an awesome M&G here in Green Bay with a day ride up to and around Door County including some awesome rustic roads along lake Michigan (probably ...

Latest reply, 5/18/2013
Darn: Gotcha ! :popcorn: :popcorn: :popcorn: :popcorn:2013 Spring M&G - Green Bay - June 7, 8 and 9

793 posts, last by:

Darn

In: Miscellaneous, 3/15/2013, 197 replies
Subject: MOTORHEAD T-SHIRTS! Going into Production
Irish_Artist: Final price is $30.00 for Short Sleeves and $36.00 For Long Sleeves I'm ordering 5 extras of the RSC Shirts left available, Let me know if you want one. _________________________________________________ Alrighty ...

Latest reply, 5/18/2013
Darn: :popcorn: :popcorn: :popcorn: :popcorn: :popcorn: :whistle: :whistle: :whistle: :woohoo: :woohoo: ...MOTORHEAD T-SHIRTS! Going into Production

198 posts, last by:

Darn

In: Miscellaneous, 5/18/2013, 3 replies
Subject: I like the *smell* of a well tuned Roadie...
Doc_V: Is it just me or does anyone else like the smell of a well tuned R*? I can definitely tell when it's running rich, and I *don't* like the smell of it, but I do like the smell when it's tuned right. Reminds ...

Latest reply, 5/18/2013
wild_mac: mine smells of burnt gas maybe its not running right,how many turns out for the pms with jetted carb ...I like the *smell* of a well tuned Roadie...

4 posts, last by:

wild_mac

In: Rides, Meets, Events, 3/24/2013, 15 replies
Subject: Saturday Rides in Southern Cali
Mario: Hey guys, this past Saturday a friend and I started to highlight every road on a map of So Cal that we've been riding on our Road Stars. We did Costa Mesa 55 freeway to the 5N to the 57N up to 210W, started ...

Latest reply, 5/18/2013
Mario: Sorry Swider, just saw the post. We camped out there and come back next day, next Friday going to Yosemite ...Saturday Rides in Southern Cali

16 posts, last by:

Mario

In: Miscellaneous, 5/18/2013, 1 reply
Subject: WANTED: Raider front wheel
Signguy: I'm looking for a Raider front wheel. I would appreciate any help finding one. Thanks guys Ryan

Latest reply, 5/18/2013
Questcap: eBay... they're there... seen them for as little as $100.;)WANTED: Raider front wheel

2 posts, last by:

Questcap

In: Body/Frame, 5/18/2013, 9 replies
Subject: PAINT IS DONE!!!!!!
texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ...

Latest reply, 5/18/2013
wild_mac: cant wait to see it :popcorn:PAINT IS DONE!!!!!!

10 posts, last by:

wild_mac

In: Non Motorcycle Topics, 5/17/2013, 19 replies
Subject: pissed at work, dumb hilo driver >:-{
smokescreens: Damn hilo driver went fifty miles and hour into my trailor with a parts rack on his forks. Hit my bulkhead so hard he riped the front of my trailor off! Damn neck hurts now too.

Latest reply, 5/18/2013
wild_mac: :laugh: that had to be some cheesy trailerpissed at work, dumb hilo driver >:-{

20 posts, last by:

wild_mac

In: Bike Talk, 5/18/2013, 10 replies
Subject: Carb leaking gas
Chubs: After installing my new stator I started my bike and noticed fuel dumping between the cylinders. I have taken the air cleaner off and tried to find where the leak is coming from with no luck. Its not ...

Latest reply, 5/18/2013
Chubs: Thanks for the help fellas. I've got the carb out I think I'll go ahead and replace the float valve and ...Carb leaking gas

11 posts, last by:

Chubs

In: Non Motorcycle Topics, 5/18/2013, 10 replies
Subject: Finally won first place
BDog: :woohoo: Finally won first place last Saturday in the Community Transportation Roadeo of New Jersey. I have bin in 2nd place for 4 straight years, and bin out to the Nationals for 4yrs. This will make ...

Latest reply, 5/18/2013
BDog: thanks for the info that sound like a nice ride. still looking into maybe renting. love to see the area. ...Finally won first place

11 posts, last by:

BDog

In: Non Motorcycle Topics, 5/18/2013, 2 replies
Subject: The Ultimate Ethnic Joke
barmandr: An Englishman, a Scotsman, an Irishman, a Welshman, a Latvian, a Turk, a German, an Indian, several Americans(including a Hawaiian and an Alaskan), an Argentinean, a Dane, an Australian, a Slovak, an Egyptian, ...

Latest reply, 5/18/2013
SKWEARpeg: :laugh: :laugh: A lot of work to get there... Rico will love this if he sees it.:cheer:The Ultimate Ethnic Joke

3 posts, last by:

SKWEARpeg

In: Bike Talk, 5/18/2013, 5 replies
Subject: Burn cable
Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ...

Latest reply, 5/18/2013
jd750ace: You should switch back to the 10 amp fuse. If you are trying to run other stuff off the blue wire, it ...Burn cable

6 posts, last by:

jd750ace

In: Jetting, 5/18/2013, 12 replies
Subject: Very Heavy Fuel Consumption
Schweeet Daddy T: My fuel consumption is ridiculous... 17mpg and this with no mods on the bike except a half of stage one gutting of the stock pipes. I say half because I only removed the rear cone and drilled through ...

Latest reply, 5/18/2013
SKWEARpeg: I think if your keeping the stock pipes, I'd do at least a stage 2(see how you like it, and you ...Very Heavy Fuel Consumption

13 posts, last by:

SKWEARpeg

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.