hi guys, as i had nothing in the workshop to enable the lifting [and ultimately wheel-removal] of my roady, i decided to make something.....i realise it kinda req that you have a bike ramp/lift in order for it to work, but if it helps just one fellow rider, then ive helped-out
dead easy and basic, but works like a 'champ'........
just odds and ends of box section steel welded to make 4x side-brackets... and 2x box to slide over the ends, add some rubber-strip [bonded to the horizontal-supports] to stop any damage to frame-rails on the bike....and 4x m8 nuts welded over a hole so you can tighten up the pinch-bolts to secure [not really needed tbh, it doesnt budge an inch even if i dont do-them-up] but...i am if nothing else a bit of a perfectionist, so i like them there for peace of mind lol
few coats of black enamel.....and voila, took me about 2 hrs to cut/fab/weld all the bits.....and another hour to paint......cost? about 30£ or 35$ [ish] worth of materials
enjoy