LokoTripper wrote:







Loko something I have noticed is that your adjuster for the right side of the bike is not right! I watched your video and it looks like the belt is tracking to the right which means your wheel is slightly cocked. Your belt tension should be checked on the bottom part of the belt near the ground. Push it up toward the seat of the bike you should have around 1/2" play in the belt. Second you need to start over loosen your belt put the adjuster on like the one in this picture and then adjust your tensioners equally on each side. There is a line to go by. Start with them even on each side then make 1 turn on the right and then one turn on the left. Do this till you have your belt adjusted to have 1/2" up play in the belt. Then check your tracking again. If the belt is still wanting to run to the inside of the front pulley then you need to loosen the right adjuster by one turn and then tighten the left adjuster by one turn. Then spin the wheel again several revolutions to see how it's tracking. You may need to loosen the right a second time and tighten the left.