The problem I run into is I lowered my bike 1.5” front and 2“ in the rear. A 2x6 does not get it up high enough to get my jack stand under. So I used a 2x8 add glued and screwed a 1X8 to it for more height and cut a wedge to the front side 3x8. It takes me a few tries to drive the bike up on the mini ramps because one or both ramps slide on my concert floor. Once up on the ramp I have to slide another 3x8 piece under my kick stand. Then dismount from the bike and slide the jack stand underneath the bike. It is a real pain to do it by myself. I just wish there was a jack stand that would fit under the bike. I looked at using scissor jacks like the ones a local bike shop uses but they seemed to be over priced to me. Getting it up on my jack stand is easy to do when there is someone else helping but most of the time I do not want to wait for someone to help so I do it alone.