Re:Any Tips on removing exhaust bolts? (1 viewing) (1) Guest
Favoured: 0
|
|
|
TOPIC: Re:Any Tips on removing exhaust bolts?
|
|
|
|
Any Tips on removing exhaust bolts? 6 Months, 1 Week ago
|
|
Any tips on removing exhaust manifold bolts ?
any tips on installing them..like should I use loc tite?
2007 Roadstar 2500 miles
any ideas appreciated...  |
|
|
|
 Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months, 1 Week ago
|
|
|
If you mean the 8MM nut , just remove and replace as normal. No loctite , and do not over tighten as they will break. BB
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months, 1 Week ago
|
|
|
The exhaust header located at the jugs allen head bolts 2 on each pipe
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months, 1 Week ago
|
|
|
Use anti-seize compound.
Doc
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months, 1 Week ago
|
|
|
Yeah , they're just nuts , you will see it as you take them off. BB
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months ago
|
|
Knightman wrote:
Any tips on removing exhaust manifold bolts ?
any tips on installing them..like should I use loc tite?
2007 Roadstar 2500 miles
any ideas appreciated...
When I installed my Roadhouse Classics I eliminated the OEM allen nuts entirely. I went with stainless steel washers & hex nuts, then topped them with chrome acorn nuts.
Also, NO to the loc-tite - YES to the anti-seize.
|
|
|
|
Logged
|
|
|
----
2006 Midnight Silverado, MaxFlo Air Kit, Roadhouse Classics 2-1 Pipes:
OEM manifold, 190 Main, 37.5 Pilot, Needle (3rd groove, OEM white spacer), Maxmix Pro PMS (2.5 turns out), Accel Pump Duration (1 turn out, nut in front), Float Height (w/carb upside down): 16mm, 43-45 MPG
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months ago
|
|
|
Tri-Flow....great for breaking up the rust and lubing the thread....great product if anyone here hasnt heard of it..
|
|
|
|
Logged
|
|
|
Sig Pic deletged - greater that 450 pixels and 50 kb
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months ago
|
|
|
To get apart spray with PB Blaster, Liquid Wrench, Kroil, etc. When putting together use ANTI-SIEZE COMPOND.
Clifford
|
|
|
|
Logged
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:Any Tips on removing exhaust bolts? 6 Months ago
|
|
|
probably dont need to do this but when i change pipes i run the bike around town to get it hot and then just loosen the bolts a crack when i get home, may be nothing but a whole bunch of heat cant hurt hah
|
|
|
|
Logged
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->
