Re:1st ever real service - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Electrical/Electronics

Re:1st ever real service (1 viewing) (1) Guest

Favoured: 0

TOPIC: Re:1st ever real service

Forum Tools

#205994

SobaCracka (User)

It's best to eat crow while fresh.

Platinum Boarder

Posts: 1948

1st ever real service 2 Years, 7 Months ago

Well, it's official, I have scheduled my first ever real service visit at the shop for my R*. I posted about the fuel gauge acting up and getting an 8-flash error code. Well, for the second time in the past 3 weeks, I went to start the bike, and the fuel pump wouldn't engage. Let it sit for an hour and tried again, and I heard that familiar prime tinging, and she fired right up. Rather than pull the sending unit, I'm just going to have the shop check it out. The sending unit is covered under the YES warranty, so I hope it's that or something else covered. For all I know, it could be electrical off the ignition switch. Anyway, would be nice to get some of my money out of that coverage.

She's gone 34,000+ miles without so much as a sneeze, and thanks to everyone here on the forum, I've been able to take care of a few minor issues and do all my own maintenance and a few mods I wanted along the way.

Fingers crossed. Miss here already.

Logged

Earl in Catonsville, MD

The administrator has disabled public write access.

#205998

Flashback (Moderator)

Just the facts, Ma'am..

Moderator

Posts: 9186

Re:1st ever real service 2 Years, 7 Months ago
Good luck Earl, If it were me, I'd be very nervous...

Logged

The administrator has disabled public write access.

#206011

SobaCracka (User)

It's best to eat crow while fresh.

Platinum Boarder

Posts: 1948

Re:1st ever real service 2 Years, 7 Months ago
I trust the wrenches here. Good reports on them, with lots of experience. I just don't like the possible expense, and I really don't like not being able to hop on the scoot anytime I want. Blah!

Logged

Earl in Catonsville, MD

The administrator has disabled public write access.

#208234

SobaCracka (User)

It's best to eat crow while fresh.

Platinum Boarder

Posts: 1948

Re:1st ever real service 2 Years, 7 Months ago
Update: Fuel sender the problem. Part ordered last Friday. Due in today or tomorrow. Covered under the warranty. Yeah!

Logged

Earl in Catonsville, MD

The administrator has disabled public write access.

#208236

silver_fox (User)

I wanna ride!

Platinum Boarder

Posts: 1127

Re:1st ever real service 2 Years, 7 Months ago
Good for you. Glad it was something covered.

Logged

The administrator has disabled public write access.

#208237

Greysnake (User)

I'm so far behind I think I'm first.

Platinum Boarder

Posts: 7326

Re:1st ever real service 2 Years, 7 Months ago
Glad it's an easy fix. get back to riding.

Logged

06 Midnight Silverado
*nothing shines like a star*

The administrator has disabled public write access.

#208266

stinger (User)

Hey y'all...watch this!

Platinum Boarder

Posts: 1387

Re:1st ever real service 2 Years, 7 Months ago
SobaCracka wrote: Update: Fuel sender the problem. Part ordered last Friday. Due in today or tomorrow. Covered under the warranty. Yeah! YEEEHAAAAA!

Logged

http://s671.photobucket.com/home/jhurdle/index

The administrator has disabled public write access.

#208365

SobaCracka (User)

It's best to eat crow while fresh.

Platinum Boarder

Posts: 1948

Re:1st ever real service 2 Years, 7 Months ago
Picked her up. Sweet reunion.

Logged

Earl in Catonsville, MD

The administrator has disabled public write access.

#208494

Erbman02 (User)

Platinum Boarder

Posts: 3382

Re:1st ever real service 2 Years, 7 Months ago
And so you know, the fuel sending unit has nothing to do with fuel pump. Sending unit only shows amount of gas in tank, and thats all it does.

Logged

The administrator has disabled public write access.

Forum List

Technical Corner

Electrical/Electronics

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bike Talk, 2/11/2012, 2 replies Subject: Solo Seats- Narrowing down the list, want opinions Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ... Latest reply, 2/11/2012 Tug: Well personally I like the way the comfort cruise and the corbin hollywood solo look. I am also thinking ...Solo Seats- Narrowing down the list, want opinions 3 posts, last by: Tug In: Non Motorcycle Topics, 2/11/2012, 2 replies Subject: New family member greyphart: Names Reggie. 4 1/2 year old Golden ... Latest reply, 2/11/2012 Curt: Teach him to ride on the tank. Only thing is you will need a face shield to keep off the slobber.:laugh: ...New family member 3 posts, last by: Curt In: Bolt Ons, 2/11/2012 Subject: Decals moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. Weston ... Decals new topic by: moreland4 In: Bike Talk, 2/11/2012, 3 replies Subject: This tachometer? dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ... Latest reply, 2/11/2012 Curt: They both will work and they are made by the same company and are the same tach. Baron's has the same ...This tachometer? 4 posts, last by: Curt In: Maintenance, 2/10/2012, 10 replies Subject: Throtle return rate espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ... Latest reply, 2/11/2012 espressodude: Thanks guys I adjusted the cable at the bars and works good now. I think my carb is leaking but it ...Throtle return rate 11 posts, last by: espressodude In: Bike Talk, 2/5/2012, 1 reply Subject: WTB: Landon's Grab Bar major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ... Latest reply, 2/11/2012 major443: Still on the hunt for a Landon's grab bar, anyone?? Major WTB: Landon's Grab Bar 2 posts, last by: major443 In: Non Motorcycle Topics, 2/10/2012, 5 replies Subject: Got my new boots! chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ... Latest reply, 2/11/2012 Big Dawg: Don't why you're worried about the HD boots, John. I know that there are some here that are (almost ...Got my new boots! 6 posts, last by: Big Dawg In: Bolt Ons, 2/10/2012, 4 replies Subject: Floorboard Extensions Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob Latest reply, 2/11/2012 chrisxv1600al: Rob, Thats exactly what I was thinking when I made my spacers. My bike has the Kuryakyn twin Velocity ...Floorboard Extensions 5 posts, last by: chrisxv1600al In: Non Motorcycle Topics, 2/11/2012, 3 replies Subject: Lets go flying saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152 Latest reply, 2/11/2012 Tug: well... hold on to the bike and not the windshield :laugh: :laugh: :laugh:Lets go flying 4 posts, last by: Tug In: Introductions, 1/30/2012, 30 replies Subject: My First R* LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ... Latest reply, 2/11/2012 chromepony: :welcome:from beautiful N/E Georgia. Enjoy the ride !B)My First R* 31 posts, last by: chromepony In: Bike Talk, 2/10/2012, 23 replies Subject: this road star is to cool!!! smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow Latest reply, 2/11/2012 Big Dawg: Very nice ride! BDthis road star is to cool!!! 24 posts, last by: Big Dawg In: Electrical/Electronics, 2/11/2012, 1 reply Subject: new key switch help 250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ... Latest reply, 2/11/2012 Erbman02: from bike, you want the red wire to connect to the Brown/blue wire when key is turned on, that supplies ...new key switch help 2 posts, last by: Erbman02 In: Bolt Ons, 2/9/2012, 9 replies Subject: Front wheel ring signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers. Latest reply, 2/11/2012 chico: We like to call them "pie plates", and Ultrastarmakes them and does a fantastic job on them ! I have ...Front wheel ring 10 posts, last by: chico In: Body/Frame, 2/11/2012 Subject: Stock heel/toe shifter….. ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ... Stock heel/toe shifter….. new topic by: ROADGRABBER In: Non Motorcycle Topics, 2/11/2012, 2 replies Subject: Growing old, kicking and screaming mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ... Latest reply, 2/11/2012 Tug: :laugh: :laugh: :laugh:Growing old, kicking and screaming 3 posts, last by: Tug In: Bike Talk, 2/11/2012, 1 reply Subject: rear suspension adjustment for 2004 midnight star sundance: I see the adjustment for the rear suspension in the manual, I have just started riding 2 up and need more suspension in the rear. It seems to bottom out sooner. Which way do I need to make the adjustment ... Latest reply, 2/11/2012 Erbman02: here ya go http://dl.dropbox.com/u/127455/RoadStar_User_Manual.pdf pg 3-15 and 3-16 note where ...rear suspension adjustment for 2004 midnight star 2 posts, last by: Erbman02 In: Electrical/Electronics, 2/11/2012, 4 replies Subject: Extending wires for inside the bars... goodnamesaretook: Anyone out there have any idea how much length should need to be added to the stock wiring to be able to run the wires inside a set of 16" apes with stock risers. I've got the bars on order and would ... Latest reply, 2/11/2012 nightrider: About a foot, as mentioned above. Just remember to stagger your splices.B)Extending wires for inside the bars... 5 posts, last by: nightrider In: Maintenance, 2/10/2012, 20 replies Subject: Ignition switch and battery ???? BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ... Latest reply, 2/11/2012 BEAMS123: Pita=breezeIgnition switch and battery ???? 21 posts, last by: BEAMS123 In: Maintenance, 2/11/2012, 9 replies Subject: What should I do? azbto: Ok, a little long but need to lay the ground work. Picked up an '05 1700 Midnight from a small dealership a couple months ago, only has 1500 miles on her. Well first thing I noticed was the tires were ... Latest reply, 2/11/2012 davej: If you still have the stock airbox you might want to think about doing a poormans Bak. and use the jetting ...What should I do? 10 posts, last by: davej In: Bike Talk, 2/11/2012, 1 reply Subject: Greate Website NorThai: Have a look... :) Latest reply, 2/11/2012 XXX Custom Cycles: Greate Website 2 posts, last by: XXX Custom Cycles In: Bike Talk, 2/10/2012, 9 replies Subject: Waht Tires do you ride??? ear3: Latest reply, 2/11/2012 MikelJay: Metzler ME880's front and rear Like ROADGRABBER said, made a world of difference in the handling of ...Waht Tires do you ride??? 10 posts, last by: MikelJay In: Miscellaneous, 2/10/2012, 3 replies Subject: selling my 07 cast wheels...help ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market? Latest reply, 2/11/2012 stanag: I too am in search of wheels. send a photo and lets talk price Stanselling my 07 cast wheels...help 4 posts, last by: stanag In: Maintenance, 2/10/2012, 10 replies Subject: Lithium Soap? About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ... Latest reply, 2/11/2012 Erbman02: Lithium soap? I used it one time, but could never get that greasy feeling off my body no matter how ...Lithium Soap? 11 posts, last by: Erbman02 In: Electrical/Electronics, 2/10/2012, 5 replies Subject: Led turn signals fetasigma: I have an led taillight and was thinking of putting in led turn signals as well. Wich is better putting in load resistors or just changing out the flasher relay for one that is led compatible. Also is ... Latest reply, 2/11/2012 texasscott1: They should unless someone has changed something. You can test the self cancel function by turning ...Led turn signals 6 posts, last by: texasscott1 In: Bike Talk, 2/10/2012, 7 replies Subject: Fairing and tour trunk ideas Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom Latest reply, 2/11/2012 davej: I went with the HD fairing with no regrets. Like was already said you can install tunes and gauges and ...Fairing and tour trunk ideas 8 posts, last by: davej In: Electrical/Electronics, 2/1/2012, 11 replies Subject: starter problems Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear Latest reply, 2/11/2012 rphazen: Now, with what you've saved on fixing it your self you are entitled to spend that on CHROME!!! :woohoo:starter problems 12 posts, last by: rphazen In: Bolt Ons, 2/10/2012, 7 replies Subject: Removing passing lights azbto: 1700 midnight star with yamaha passing lamps, i want to clean up the front a bit and am contemplating removing the passing light bar but see the front of the headlight is supported by the bar. Does anybody ... Latest reply, 2/11/2012 signal20k9: +1 on trading. I've got my original turn signal bar with the turn signals. Maybe we can work out a deal ...Removing passing lights 8 posts, last by: signal20k9 In: Miscellaneous, 2/10/2012, 7 replies Subject: Custom back patch... Unab8d_Ly4m: Was wondering if anyone knew where I could get a back patch done for a decent price. I would like to get my signature picture without the LSU or Saints logos, but with the colors reversed. Latest reply, 2/11/2012 Billmel: Try this place, I just ordered 50 custom patches and they were half what everyone else was. There sample ...Custom back patch... 8 posts, last by: Billmel In: Bike Talk, 2/4/2012, 56 replies Subject: Is RoadStar S too Big For Me? Female Rider Asking azalearider: Hi, New to the site and this is my first thread. Looking for some advice. I'm a female rider - about 130 pounds and 5'5". My first purchase was 400cc bike - which I rode for 7 years. Then moved on ... Latest reply, 2/11/2012 HEAVY METAL NOISE 101: :welcome:I just bought a 03' 1600 in oct. and my wife and I love it.If you know any body who has one ...Is RoadStar S too Big For Me? Female Rider Asking 57 posts, last by: HEAVY METAL NOISE 101 In: Miscellaneous, 2/9/2012, 6 replies Subject: Metric Magic Plumbwader: Anyone have a good email addy for metric magic. I keep getting mailer daemons. Im trying to get a price on some stainless cables for my new apes? B) ill take suggestions about other places to contact ... Latest reply, 2/10/2012 deadweight: Yes sir, Tim is fast and has good prices too.:)Metric Magic 7 posts, last by: deadweight

New Forum Posts

In: Bike Talk, 2/11/2012, 2 replies
Subject: Solo Seats- Narrowing down the list, want opinions
Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ...

Latest reply, 2/11/2012
Tug: Well personally I like the way the comfort cruise and the corbin hollywood solo look. I am also thinking ...Solo Seats- Narrowing down the list, want opinions

3 posts, last by:

Tug

In: Non Motorcycle Topics, 2/11/2012, 2 replies
Subject: New family member
greyphart: Names Reggie. 4 1/2 year old Golden ...

Latest reply, 2/11/2012
Curt: Teach him to ride on the tank. Only thing is you will need a face shield to keep off the slobber.:laugh: ...New family member

3 posts, last by:

Curt

In: Bolt Ons, 2/11/2012
Subject: Decals
moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. Weston ...
Decals

new topic by:

moreland4

In: Bike Talk, 2/11/2012, 3 replies
Subject: This tachometer?
dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ...

Latest reply, 2/11/2012
Curt: They both will work and they are made by the same company and are the same tach. Baron's has the same ...This tachometer?

4 posts, last by:

Curt

In: Maintenance, 2/10/2012, 10 replies
Subject: Throtle return rate
espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ...

Latest reply, 2/11/2012
espressodude: Thanks guys I adjusted the cable at the bars and works good now. I think my carb is leaking but it ...Throtle return rate

11 posts, last by:

espressodude

In: Bike Talk, 2/5/2012, 1 reply
Subject: WTB: Landon's Grab Bar
major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ...

Latest reply, 2/11/2012
major443: Still on the hunt for a Landon's grab bar, anyone?? Major WTB: Landon's Grab Bar

2 posts, last by:

major443

In: Non Motorcycle Topics, 2/10/2012, 5 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...

Latest reply, 2/11/2012
Big Dawg: Don't why you're worried about the HD boots, John. I know that there are some here that are (almost ...Got my new boots!

6 posts, last by:

Big Dawg

In: Bolt Ons, 2/10/2012, 4 replies
Subject: Floorboard Extensions
Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob

Latest reply, 2/11/2012
chrisxv1600al: Rob, Thats exactly what I was thinking when I made my spacers. My bike has the Kuryakyn twin Velocity ...Floorboard Extensions

5 posts, last by:

chrisxv1600al

In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: Lets go flying
saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152

Latest reply, 2/11/2012
Tug: well... hold on to the bike and not the windshield :laugh: :laugh: :laugh:Lets go flying

4 posts, last by:

Tug

In: Introductions, 1/30/2012, 30 replies
Subject: My First R*
LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ...

Latest reply, 2/11/2012
chromepony: :welcome:from beautiful N/E Georgia. Enjoy the ride !B)My First R*

31 posts, last by:

chromepony

In: Bike Talk, 2/10/2012, 23 replies
Subject: this road star is to cool!!!
smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow

Latest reply, 2/11/2012
Big Dawg: Very nice ride! BDthis road star is to cool!!!

24 posts, last by:

Big Dawg

In: Electrical/Electronics, 2/11/2012, 1 reply
Subject: new key switch help
250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ...

Latest reply, 2/11/2012
Erbman02: from bike, you want the red wire to connect to the Brown/blue wire when key is turned on, that supplies ...new key switch help

2 posts, last by:

Erbman02

In: Bolt Ons, 2/9/2012, 9 replies
Subject: Front wheel ring
signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers.

Latest reply, 2/11/2012
chico: We like to call them "pie plates", and Ultrastarmakes them and does a fantastic job on them ! I have ...Front wheel ring

10 posts, last by:

chico

In: Body/Frame, 2/11/2012
Subject: Stock heel/toe shifter…..
ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ...
Stock heel/toe shifter…..

new topic by:

ROADGRABBER

In: Non Motorcycle Topics, 2/11/2012, 2 replies
Subject: Growing old, kicking and screaming
mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ...

Latest reply, 2/11/2012
Tug: :laugh: :laugh: :laugh:Growing old, kicking and screaming

3 posts, last by:

Tug

In: Bike Talk, 2/11/2012, 1 reply
Subject: rear suspension adjustment for 2004 midnight star
sundance: I see the adjustment for the rear suspension in the manual, I have just started riding 2 up and need more suspension in the rear. It seems to bottom out sooner. Which way do I need to make the adjustment ...

Latest reply, 2/11/2012
Erbman02: here ya go http://dl.dropbox.com/u/127455/RoadStar_User_Manual.pdf pg 3-15 and 3-16 note where ...rear suspension adjustment for 2004 midnight star

2 posts, last by:

Erbman02

In: Electrical/Electronics, 2/11/2012, 4 replies
Subject: Extending wires for inside the bars...
goodnamesaretook: Anyone out there have any idea how much length should need to be added to the stock wiring to be able to run the wires inside a set of 16" apes with stock risers. I've got the bars on order and would ...

Latest reply, 2/11/2012
nightrider: About a foot, as mentioned above. Just remember to stagger your splices.B)Extending wires for inside the bars...

5 posts, last by:

nightrider

In: Maintenance, 2/10/2012, 20 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...

Latest reply, 2/11/2012
BEAMS123: Pita=breezeIgnition switch and battery ????

21 posts, last by:

BEAMS123

In: Maintenance, 2/11/2012, 9 replies
Subject: What should I do?
azbto: Ok, a little long but need to lay the ground work. Picked up an '05 1700 Midnight from a small dealership a couple months ago, only has 1500 miles on her. Well first thing I noticed was the tires were ...

Latest reply, 2/11/2012
davej: If you still have the stock airbox you might want to think about doing a poormans Bak. and use the jetting ...What should I do?

10 posts, last by:

davej

In: Bike Talk, 2/11/2012, 1 reply
Subject: Greate Website
NorThai: Have a look... :)

Latest reply, 2/11/2012
XXX Custom Cycles: Greate Website

2 posts, last by:

XXX Custom Cycles

In: Bike Talk, 2/10/2012, 9 replies
Subject: Waht Tires do you ride???
ear3:

Latest reply, 2/11/2012
MikelJay: Metzler ME880's front and rear Like ROADGRABBER said, made a world of difference in the handling of ...Waht Tires do you ride???

10 posts, last by:

MikelJay

In: Miscellaneous, 2/10/2012, 3 replies
Subject: selling my 07 cast wheels...help
ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market?

Latest reply, 2/11/2012
stanag: I too am in search of wheels. send a photo and lets talk price Stanselling my 07 cast wheels...help

4 posts, last by:

stanag

In: Maintenance, 2/10/2012, 10 replies
Subject: Lithium Soap?
About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ...

Latest reply, 2/11/2012
Erbman02: Lithium soap? I used it one time, but could never get that greasy feeling off my body no matter how ...Lithium Soap?

11 posts, last by:

Erbman02

In: Electrical/Electronics, 2/10/2012, 5 replies
Subject: Led turn signals
fetasigma: I have an led taillight and was thinking of putting in led turn signals as well. Wich is better putting in load resistors or just changing out the flasher relay for one that is led compatible. Also is ...

Latest reply, 2/11/2012
texasscott1: They should unless someone has changed something. You can test the self cancel function by turning ...Led turn signals

6 posts, last by:

texasscott1

In: Bike Talk, 2/10/2012, 7 replies
Subject: Fairing and tour trunk ideas
Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom

Latest reply, 2/11/2012
davej: I went with the HD fairing with no regrets. Like was already said you can install tunes and gauges and ...Fairing and tour trunk ideas

8 posts, last by:

davej

In: Electrical/Electronics, 2/1/2012, 11 replies
Subject: starter problems
Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear

Latest reply, 2/11/2012
rphazen: Now, with what you've saved on fixing it your self you are entitled to spend that on CHROME!!! :woohoo:starter problems

12 posts, last by:

rphazen

In: Bolt Ons, 2/10/2012, 7 replies
Subject: Removing passing lights
azbto: 1700 midnight star with yamaha passing lamps, i want to clean up the front a bit and am contemplating removing the passing light bar but see the front of the headlight is supported by the bar. Does anybody ...

Latest reply, 2/11/2012
signal20k9: +1 on trading. I've got my original turn signal bar with the turn signals. Maybe we can work out a deal ...Removing passing lights

8 posts, last by:

signal20k9

In: Miscellaneous, 2/10/2012, 7 replies
Subject: Custom back patch...
Unab8d_Ly4m: Was wondering if anyone knew where I could get a back patch done for a decent price. I would like to get my signature picture without the LSU or Saints logos, but with the colors reversed.

Latest reply, 2/11/2012
Billmel: Try this place, I just ordered 50 custom patches and they were half what everyone else was. There sample ...Custom back patch...

8 posts, last by:

Billmel

In: Bike Talk, 2/4/2012, 56 replies
Subject: Is RoadStar S too Big For Me? Female Rider Asking
azalearider: Hi, New to the site and this is my first thread. Looking for some advice. I'm a female rider - about 130 pounds and 5'5". My first purchase was 400cc bike - which I rode for 7 years. Then moved on ...

Latest reply, 2/11/2012
HEAVY METAL NOISE 101: :welcome:I just bought a 03' 1600 in oct. and my wife and I love it.If you know any body who has one ...Is RoadStar S too Big For Me? Female Rider Asking

57 posts, last by:

HEAVY METAL NOISE 101

In: Miscellaneous, 2/9/2012, 6 replies
Subject: Metric Magic
Plumbwader: Anyone have a good email addy for metric magic. I keep getting mailer daemons. Im trying to get a price on some stainless cables for my new apes? B) ill take suggestions about other places to contact ...

Latest reply, 2/10/2012
deadweight: Yes sir, Tim is fast and has good prices too.:)Metric Magic

7 posts, last by:

deadweight

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.