boodie111 wrote:
OK, I did all of that, hit the Dg wire (under switch) with the + and got light at the RH signal and the green dash light. did the same with the Y/R wire (on top of switch) and no light at the LH signal or the dash...

So, I have light at the right signal and dash but not light at the left signal and dash BUT those work under normal conditions

Bad relay? or bad switch?

I only unplugged the "turn signal relay" but not the "relay unit" do I need to do both?

Leave the "relay unit " connected; just unhook the "turn signal relay." The turn signal relay is kind of 2 in 1 so half (LH) does work and half (RH) might not work. The same with the turn signal switch half does (LH) work and half (RH) might not work. When you put power to the Dg wire at the switch and the right signals light up that proves that the right side wires and bulbs are OK! When you put power to the Y/R wire at the switch nothing should happen to the LH side and it didn't; so that is fine. If you put power to the Y/R wire at the switch and the switch is not on for right turn then nothing should happen. When you put power to the Y/R wire with the switch on for right turn then the RH lights should light up, if they don't then half of the switch is bad; if they do light up then the switch is OK and the turn signal relay is bad.

Clifford