Re:Accessory wire - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Electrical/Electronics

Re:Accessory wire

Favoured: 0

TOPIC: Re:Accessory wire

Forum Tools

#289643

Lumpy_63 (User)

Fresh Boarder

Posts: 8

Accessory wire 1 Year, 11 Months ago

I did a search but couldn't find an answer to this question. Which model years have an accessory wire? I am getting ready to install some additional lights and I would like to find out if my 2007 Midnight Star has one. If it has one, would it be located under the left side cover, like the 2008+ models? Thanks in advance for any advice. I would go and look, but my bike is in the shop getting the front tire changed (previous owner must have left it underinflated - it only has 1300 miles on it...).

Logged

The administrator has disabled public write access.

#289647

TampaSVT (User)

Life is hard. It's harder if yer' stupid(J.Wayne)

Platinum Boarder

Posts: 4599

Re:Accessory wire 1 Year, 11 Months ago
Lumpy: I would bet that the 07 has the same accessory wire location as my 08. http://www.powercommander.com/downloads/431/install/411/eng431-41.pdf I think it's on page 5. Welcome. Rich

Logged

2008 Road Star
Tricky Air Ride(remote controlled)
6-degree Raked Front-end
Ape Hangers w/Internal Throttle & Wiring
RoadHouse Dooleys
Bunch of chrome
Online Album
http://www.TampaSVT.com

The administrator has disabled public write access.

#289684

old dog (User)

Platinum Boarder

Posts: 1602

Re:Accessory wire 1 Year, 11 Months ago
There is a white connector in the headlight. blue/blk stirpe and green dots, on one side. blk with green dots paired on the other. bill

Logged

110 cu in., PR/JE 10.25:1 HC pistons, PR Cam, PR adjustable push rods, PR stage II ported heads (2mm oversize valves)

The administrator has disabled public write access.

#289702

Lumpy_63 (User)

Fresh Boarder

Posts: 8

Re:Accessory wire 1 Year, 11 Months ago
Thanks for the help!

Logged

The administrator has disabled public write access.

#289790

TampaSVT (User)

Life is hard. It's harder if yer' stupid(J.Wayne)

Platinum Boarder

Posts: 4599

Re:Accessory wire 1 Year, 11 Months ago
old dog wrote: There is a white connector in the headlight. blue/blk stirpe and green dots, on one side. blk with green dots paired on the other. bill Hopefully, the new lights are on the front of the bike... Rich

Logged

Last Edit: 2010/06/16 15:31 By TampaSVT.

2008 Road Star
Tricky Air Ride(remote controlled)
6-degree Raked Front-end
Ape Hangers w/Internal Throttle & Wiring
RoadHouse Dooleys
Bunch of chrome
Online Album
http://www.TampaSVT.com

The administrator has disabled public write access.

#289858

nightstar57 (User)

ride it like ya paid for it ..

Platinum Boarder

Posts: 2937

Re:Accessory wire 1 Year, 11 Months ago
Welcome from another '07 midnighter.. you can unhook the useless carb heater and use that circuit..

Logged

Last Edit: 2010/06/16 18:40 By nightstar57.

The administrator has disabled public write access.

Forum List

Technical Corner

Electrical/Electronics

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Electrical/Electronics, 5/26/2012, 5 replies Subject: Solar Pulse Battery Energy Power Charger? Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ... Latest reply, 5/27/2012 brown91redcam: Be my luck, some a$$wipe would walk by and steal it..... :censored: :angry: :laugh: :laugh: ...Solar Pulse Battery Energy Power Charger? 6 posts, last by: brown91redcam In: Non Motorcycle Topics, 5/26/2012, 18 replies Subject: Thank you, all who served. fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny) Latest reply, 5/27/2012 FNG17: Thanks to all who served and are serving! May God Bless you and your familiesThank you, all who served. 19 posts, last by: FNG17 In: Bike Talk, 5/26/2012, 18 replies Subject: Road trip tool kit About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ... Latest reply, 5/27/2012 brown91redcam: That covers it well,great writing vikingwarhorse thanks for sharingRoad trip tool kit 19 posts, last by: brown91redcam In: Non Motorcycle Topics, 5/27/2012, 8 replies Subject: It's 3:00 am ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh: Latest reply, 5/27/2012 Darn: I noticed the same thing a couple of weeks ago,,,, it was sort of nice to know who else was reading ...It's 3:00 am 9 posts, last by: Darn In: Bike Talk, 5/26/2012, 7 replies Subject: Confused and a little frustrated. BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ... Latest reply, 5/27/2012 BK177V: I dont think they are Cobra. They do look like the ones in the above picture. I wouldnt mind buying 2 ...Confused and a little frustrated. 8 posts, last by: BK177V In: Bolt Ons, 5/26/2012, 23 replies Subject: Flag mounts for 6"x9" Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them? Latest reply, 5/27/2012 Darn: OK, last one, but if you want more, PM me. It was really easy to make with the angle and U-bolts. Plus ...Flag mounts for 6"x9" 24 posts, last by: Darn In: Website General, 5/27/2012, 4 replies Subject: Members by location. Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ... Latest reply, 5/27/2012 Ricohoc: Members by location. 5 posts, last by: Ricohoc In: Bike Talk, 5/27/2012, 1 reply Subject: Road Star Ride Tomorrow Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ... Latest reply, 5/27/2012 Blackroadie: Sounds like a good time! Have fun.;)Road Star Ride Tomorrow 2 posts, last by: Blackroadie In: Introductions, 5/26/2012, 21 replies Subject: Hello from the Region kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it. Latest reply, 5/27/2012 old dog: :welcome: From Niagara NY. billHello from the Region 22 posts, last by: old dog In: Rides, Meets, Events, 3/16/2012, 100 replies Subject: Central M&G, 2012 June 29,30, and July 1 fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ... Latest reply, 5/27/2012 Darn: All are welcome! Come on up. I've got a couple of "Guest rooms" if needed, just ask EMU and Mandy, it's ...Central M&G, 2012 June 29,30, and July 1 101 posts, last by: Darn In: Bike Talk, 5/21/2012, 42 replies Subject: I have gone to the Darkside... TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ... Latest reply, 5/27/2012 Darn: Dyna-beads are pretty easy to find, just google them. They are the best way to balance a tire, unless ...I have gone to the Darkside... 43 posts, last by: Darn In: Bike Talk, 5/8/2012, 38 replies Subject: My Project FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ... Latest reply, 5/27/2012 Ricohoc: My Project 39 posts, last by: Ricohoc In: Electrical/Electronics, 5/25/2012, 18 replies Subject: Rear tail/brake light lens FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ... Latest reply, 5/27/2012 Ricohoc: Rear tail/brake light lens 19 posts, last by: Ricohoc In: Technical Discussions, 5/26/2012, 12 replies Subject: advice on tail bags for a road trip. smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ... Latest reply, 5/27/2012 HEAVY METAL: It is usually #6 that makes us late,or a no show.Yes Dear....your outfit looks great..........let's go!advice on tail bags for a road trip. 13 posts, last by: HEAVY METAL In: Non Motorcycle Topics, 5/25/2012, 23 replies Subject: I'm Torn Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ... Latest reply, 5/27/2012 HEAVY METAL: You need to talk her into buying her a V-star,(A boat is a hole in the water that you poor money into.)(quote)POOR ...I'm Torn 24 posts, last by: HEAVY METAL In: Technical Discussions, 5/26/2012, 2 replies Subject: where does the hoses go? zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ... Latest reply, 5/27/2012 zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go? 3 posts, last by: zulu In: Miscellaneous, 5/26/2012, 12 replies Subject: this clinic has shown its true greatness yet again smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ... Latest reply, 5/27/2012 HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again 13 posts, last by: HEAVY METAL In: Electrical/Electronics, 5/26/2012, 13 replies Subject: So much for simple bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ... Latest reply, 5/27/2012 Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple 14 posts, last by: Mudslide In: Tech Tips, 5/26/2012, 6 replies Subject: Engine teardown video gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ... Latest reply, 5/27/2012 Spydr: Helps to see it done at least once, right?Engine teardown video 7 posts, last by: Spydr In: Bolt Ons, 5/24/2012, 13 replies Subject: Do I really need push & pull cables? DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James Latest reply, 5/27/2012 Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables? 14 posts, last by: Booster In: Maintenance, 5/25/2012, 12 replies Subject: I messed up the Barnett conversion some how espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ... Latest reply, 5/26/2012 Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how 13 posts, last by: Greysnake In: Miscellaneous, 5/26/2012, 11 replies Subject: Let the summer begin...(not quite) h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ... Latest reply, 5/26/2012 blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite) 12 posts, last by: blue star In: Bolt Ons, 5/26/2012, 9 replies Subject: New Handlebars - Stock Grips? alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ... Latest reply, 5/26/2012 Curt: You want the lowest prices on Kury stuff the go to this site. E-mail Glen and tell him Curt sent you ...New Handlebars - Stock Grips? 10 posts, last by: Curt In: Introductions, 5/24/2012, 35 replies Subject: Hello from Kentucky myxlr: nice to be here i ride a 2008 silverado Latest reply, 5/26/2012 Edge51: from B.C. Hello from Kentucky 36 posts, last by: Edge51 In: Miscellaneous, 4/19/2012, 8 replies Subject: Hey Stevie... OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh: Latest reply, 5/26/2012 Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie... 9 posts, last by: Edge51 In: Maintenance, 5/25/2012, 15 replies Subject: Brake pads slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA! Latest reply, 5/26/2012 mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads 16 posts, last by: mkayx In: Bike Talk, 5/26/2012, 14 replies Subject: Changing the shock spring Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press? Latest reply, 5/26/2012 Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring 15 posts, last by: Edge51 In: Miscellaneous, 5/24/2012, 41 replies Subject: Opinion about studs rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ... Latest reply, 5/26/2012 ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs 42 posts, last by: ozarkpreacher In: Miscellaneous, 5/26/2012 Subject: RoadHog75 you have a private message. gfolkert: You have a private message from me. Thanks. RoadHog75 you have a private message. new topic by: gfolkert In: Rides, Meets, Events, 3/1/2012, 133 replies Subject: Memorial Day Weekend Gathering Arundel Maine drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ... Latest reply, 5/26/2012 Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine 134 posts, last by: Questcap

New Forum Posts

In: Electrical/Electronics, 5/26/2012, 5 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...

Latest reply, 5/27/2012
brown91redcam: Be my luck, some a$$wipe would walk by and steal it..... :censored: :angry: :laugh: :laugh: ...Solar Pulse Battery Energy Power Charger?

6 posts, last by:

brown91redcam

In: Non Motorcycle Topics, 5/26/2012, 18 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)

Latest reply, 5/27/2012
FNG17: Thanks to all who served and are serving! May God Bless you and your familiesThank you, all who served.

19 posts, last by:

FNG17

In: Bike Talk, 5/26/2012, 18 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...

Latest reply, 5/27/2012
brown91redcam: That covers it well,great writing vikingwarhorse thanks for sharingRoad trip tool kit

19 posts, last by:

brown91redcam

In: Non Motorcycle Topics, 5/27/2012, 8 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:

Latest reply, 5/27/2012
Darn: I noticed the same thing a couple of weeks ago,,,, it was sort of nice to know who else was reading ...It's 3:00 am

9 posts, last by:

Darn

In: Bike Talk, 5/26/2012, 7 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...

Latest reply, 5/27/2012
BK177V: I dont think they are Cobra. They do look like the ones in the above picture. I wouldnt mind buying 2 ...Confused and a little frustrated.

8 posts, last by:

BK177V

In: Bolt Ons, 5/26/2012, 23 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?

Latest reply, 5/27/2012
Darn: OK, last one, but if you want more, PM me. It was really easy to make with the angle and U-bolts. Plus ...Flag mounts for 6"x9"

24 posts, last by:

Darn

In: Website General, 5/27/2012, 4 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...

Latest reply, 5/27/2012
Ricohoc: Members by location.

5 posts, last by:

Ricohoc

In: Bike Talk, 5/27/2012, 1 reply
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...

Latest reply, 5/27/2012
Blackroadie: Sounds like a good time! Have fun.;)Road Star Ride Tomorrow

2 posts, last by:

Blackroadie

In: Introductions, 5/26/2012, 21 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/27/2012
old dog: :welcome: From Niagara NY. billHello from the Region

22 posts, last by:

old dog

In: Rides, Meets, Events, 3/16/2012, 100 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...

Latest reply, 5/27/2012
Darn: All are welcome! Come on up. I've got a couple of "Guest rooms" if needed, just ask EMU and Mandy, it's ...Central M&G, 2012 June 29,30, and July 1

101 posts, last by:

Darn

In: Bike Talk, 5/21/2012, 42 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...

Latest reply, 5/27/2012
Darn: Dyna-beads are pretty easy to find, just google them. They are the best way to balance a tire, unless ...I have gone to the Darkside...

43 posts, last by:

Darn

In: Bike Talk, 5/8/2012, 38 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...

Latest reply, 5/27/2012
Ricohoc: My Project

39 posts, last by:

Ricohoc

In: Electrical/Electronics, 5/25/2012, 18 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...

Latest reply, 5/27/2012
Ricohoc: Rear tail/brake light lens

19 posts, last by:

Ricohoc

In: Technical Discussions, 5/26/2012, 12 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...

Latest reply, 5/27/2012
HEAVY METAL: It is usually #6 that makes us late,or a no show.Yes Dear....your outfit looks great..........let's go!advice on tail bags for a road trip.

13 posts, last by:

HEAVY METAL

In: Non Motorcycle Topics, 5/25/2012, 23 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...

Latest reply, 5/27/2012
HEAVY METAL: You need to talk her into buying her a V-star,(A boat is a hole in the water that you poor money into.)(quote)POOR ...I'm Torn

24 posts, last by:

HEAVY METAL

In: Technical Discussions, 5/26/2012, 2 replies
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...

Latest reply, 5/27/2012
zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go?

3 posts, last by:

zulu

In: Miscellaneous, 5/26/2012, 12 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...

Latest reply, 5/27/2012
HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again

13 posts, last by:

HEAVY METAL

In: Electrical/Electronics, 5/26/2012, 13 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...

Latest reply, 5/27/2012
Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple

14 posts, last by:

Mudslide

In: Tech Tips, 5/26/2012, 6 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...

Latest reply, 5/27/2012
Spydr: Helps to see it done at least once, right?Engine teardown video

7 posts, last by:

Spydr

In: Bolt Ons, 5/24/2012, 13 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James

Latest reply, 5/27/2012
Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables?

14 posts, last by:

Booster

In: Maintenance, 5/25/2012, 12 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...

Latest reply, 5/26/2012
Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how

13 posts, last by:

Greysnake

In: Miscellaneous, 5/26/2012, 11 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...

Latest reply, 5/26/2012
blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite)

12 posts, last by:

blue star

In: Bolt Ons, 5/26/2012, 9 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...

Latest reply, 5/26/2012
Curt: You want the lowest prices on Kury stuff the go to this site. E-mail Glen and tell him Curt sent you ...New Handlebars - Stock Grips?

10 posts, last by:

Curt

In: Introductions, 5/24/2012, 35 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado

Latest reply, 5/26/2012
Edge51: from B.C. Hello from Kentucky

36 posts, last by:

Edge51

In: Miscellaneous, 4/19/2012, 8 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:

Latest reply, 5/26/2012
Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie...

9 posts, last by:

Edge51

In: Maintenance, 5/25/2012, 15 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!

Latest reply, 5/26/2012
mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads

16 posts, last by:

mkayx

In: Bike Talk, 5/26/2012, 14 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?

Latest reply, 5/26/2012
Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring

15 posts, last by:

Edge51

In: Miscellaneous, 5/24/2012, 41 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...

Latest reply, 5/26/2012
ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs

42 posts, last by:

ozarkpreacher

In: Miscellaneous, 5/26/2012
Subject: RoadHog75 you have a private message.
gfolkert: You have a private message from me. Thanks.
RoadHog75 you have a private message.

new topic by:

gfolkert

In: Rides, Meets, Events, 3/1/2012, 133 replies
Subject: Memorial Day Weekend Gathering Arundel Maine
drkstr22: Here we go guys....At the coolest biker destination in the Northeast! Bentleys Saloon! Is a Biker Campground/Bar in Southern Maine that caters to the neeeds of the American Biker! Lots of great scenic ...

Latest reply, 5/26/2012
Questcap: First one back! There was only 5 of us from the Clinic. Zoom, Coot, JEaston, Geno and myself, but ...Memorial Day Weekend Gathering Arundel Maine

134 posts, last by:

Questcap

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.