Re:Automotive Tach - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Electrical/Electronics

Automotive Tach

Favoured: 0

TOPIC: Automotive Tach

Forum Tools

#367383

Wewalaw (User)

Expert Boarder

Posts: 502

Automotive Tach 2 Years ago
Would a tach made for an automobile work on the R? I looked at a small auto tach at Pep Boy's Auto today. I guess the R doesn't reach the RPM range of an auto. This one was o-8000 rpm. Had four wires, red, green, black and I believe white. Just asking because it was as small as the ones from Baron's and close to the price. Greg

Logged

The administrator has disabled public write access.

#367394

silpaul (User)

Fresh Boarder

Posts: 62

Re:Automotive Tach 2 Years ago
Yes I have heard of an auto 4cylinder tach being used but you have to build an adaptor so it will read right. Paul

Logged

The administrator has disabled public write access.

Forum List

Technical Corner

Electrical/Electronics

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bike Talk, 5/19/2013, 8 replies Subject: Why are my pipes all blue under the heat shields Stevie: I took the left heat shield off my Bassani duals to work on the pulley and underneath the heat shields the pipes are all discolored They are not discolored anywhere that shows, just underneath the heat ... Latest reply, 5/19/2013 GNR10: Better than rusty :laugh:Why are my pipes all blue under the heat shields 9 posts, last by: GNR10 In: Jetting, 5/14/2013, 18 replies Subject: 2005 Roadstar bob1964: Hello... I have a 2005 Roadstar and ever since ive had it ive had a problem that seems to be getting worse , its been back to the shop twice to be repaired , last time it came back the idle was set ... Latest reply, 5/19/2013 bob1964: Thats what i did ....in thru the carbs first then took off the pipies and filled up the bores , stuffed ...2005 Roadstar 19 posts, last by: bob1964 In: Rides, Meets, Events, 5/19/2013 Subject: Ruidoso, NM Apencash Rally EPRoadie: Just got back from the hills of NM, NE of El Paso for the Rally and got some pics if photobucket is online or being a pain in the a as always: bear with me ! ;) Ruidoso, NM Apencash Rally new topic by: EPRoadie In: Bike Talk, 5/19/2013, 10 replies Subject: carb guru's / dyno need some advice SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ... Latest reply, 5/19/2013 SMOKINJOE: SKWEARpeg,,,,ERBMAN,,, thanks for the info and setting me straight. honestly i thought that the 11.8 ...carb guru's / dyno need some advice 11 posts, last by: SMOKINJOE In: Tech Tips, 4/7/2013, 185 replies Subject: Giving the Roadstar Legs - Highway Gearing pastornj: OK - I've put enough miles on this setup to feel comfortable discussing it and even recommending it. From the first time I rode my 2001 Roadstar I felt the gearing was too low - Yeah, I know that a ... Latest reply, 5/19/2013 blue_star: That's what they make do-rags for. :PGiving the Roadstar Legs - Highway Gearing 186 posts, last by: blue_star In: Non Motorcycle Topics, 5/19/2013, 2 replies Subject: Remington Rem Squeeg-E Universal Gun Cleaning kit 1700cc: Anybody familiar with this cleaning kit? For firearms. Found it on flea bay. Latest reply, 5/19/2013 BBB: Those kits are awesome. You shouldn't have to buy anything else if you own traditional calibers. They ...Remington Rem Squeeg-E Universal Gun Cleaning kit 3 posts, last by: BBB In: Technical Discussions, 5/19/2013, 10 replies Subject: Got any Cobra Slip on's? Dysan911: Picked up a used V&H Long shots probably 2 years ago and they needed a lot of TLC to pass for what I would consider something I'd want bolted to my bike. They sound good but the chrome is really starting ... Latest reply, 5/19/2013 wild_mac: i got a set of cobra slip ons guess i had em sealed up better then the rest cause they never back fired ...Got any Cobra Slip on's? 11 posts, last by: wild_mac In: Body/Frame, 5/18/2013, 25 replies Subject: PAINT IS DONE!!!!!! texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ... Latest reply, 5/19/2013 pastornj: Well come on...get it done already!PAINT IS DONE!!!!!! 26 posts, last by: pastornj In: Non Motorcycle Topics, 5/19/2013, 1 reply Subject: Kai, you OK ? ironman: Just saw on the news, all the tornado's in Kansas. Kai, you & your family, riding bud's OK ? Prayin for ya :) :) :) Latest reply, 5/19/2013 Kaidallac: Yup, thanks for the thoughts Ironman!!!Kai, you OK ? 2 posts, last by: Kaidallac In: Body/Frame, 3/31/2013, 54 replies Subject: Spring Mods Martorious: I know, this should have been done over the winter, but with my unheated garage and tight finances over the winter it just wasn't happening. I'm gonna miss the first part of riding season, but I'm hoping ... Latest reply, 5/19/2013 Stephini3: Thanks for the compliment. I'm not doing any more painting without a paint booth. Are you ...Spring Mods 55 posts, last by: Stephini3 In: Bike Talk, 5/18/2013, 12 replies Subject: Burn cable Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ... Latest reply, 5/19/2013 Meitemark: My first test was to day with just 15-20 miles. I have roadwing,darkside (Austin taxi back wheel,150-80 ...Burn cable 13 posts, last by: Meitemark In: Maintenance, 5/19/2013, 14 replies Subject: Normal ??? Ashley: When bike has been in garage all night and i crank it and let her warm up , when i go to put it in gear i pull clutch in a bunch of times and shift into second because if i dont it jerks hard into first ... Latest reply, 5/19/2013 pastornj: Mine won't even start in 1st gear with the clutch in when it is cold - it would just take off down ...Normal ??? 15 posts, last by: pastornj In: Bike Talk, 5/18/2013, 8 replies Subject: Homemade AIS REMOVAL KIT?? Signguy: Can't I just make my own flange covers and plug? Seems easy Latest reply, 5/19/2013 jd750ace: I can give you 30 pages on any given alloy and temper.:laugh: MMPDS-04 and T.O. 1-1A-9. Aviation ...Homemade AIS REMOVAL KIT?? 9 posts, last by: jd750ace In: Bike Talk, 5/18/2013, 16 replies Subject: Lindby bars Roadstarcountryboy*: Hey guys been looking for some unique highway bars for my 07 r. Anybody have the lindby multibars? They look really cool and comfortable just expensive Latest reply, 5/19/2013 Phatstrat: Or you can buy a set of Cobra Fattys for $175, send them to me and I'll give you my $300 Lindby Bar.Lindby bars 17 posts, last by: Phatstrat In: Bike Talk, 5/19/2013, 10 replies Subject: Front Pulley Nut Stevie: How tight are you guys tightening it? I notice mine was not tight at all when I took it off, I just barely tapped the breaker bar with my palm and it loosened right up I put it on the new pulley and ... Latest reply, 5/19/2013 Vette468: Id hit with the next sized hammer.. Not a mallet.. its a big nut .Front Pulley Nut 11 posts, last by: Vette468 In: Body/Frame, 5/19/2013, 3 replies Subject: Leaky latch BlueCoupe: After putting the Yamaha hard bags on my bike and washing them I noticed the latch button leaks water around them, is this normal and if so has anyone come up with a fix for this. Latest reply, 5/19/2013 Greysnake: I took the latch off and found an o-ring that fit tight over the threads. Then tightened back up and ...Leaky latch 4 posts, last by: Greysnake In: Miscellaneous, 5/17/2013, 14 replies Subject: Rain guards/soft lowers cabtek: Got caught in rain and cold weather and was thinking it would be nice to get the wind off my legs when it's cold. Has anyone used rain guards or soft lowers? Do they affect engine cooling? Do they work? ... Latest reply, 5/19/2013 cabtek: Thanks for all the input guys! Just got back from riding in upstate New York. Fun trip. Dave... ...Rain guards/soft lowers 15 posts, last by: cabtek In: Bike Talk, 5/19/2013, 15 replies Subject: Removing Fuel Tank? MartyN8677: Also changing my spark plugs today, so I need to remove the fuel tank. There is instruction in the Tech Articles for this, but I wonder if my 08 is different than the instructions? I don't see the ... Latest reply, 5/19/2013 MartyN8677: Everything sure we back together a lot quicker than it came apart. No doubt will be much easier next ...Removing Fuel Tank? 16 posts, last by: MartyN8677 In: Technical Discussions, 5/18/2013, 11 replies Subject: Tricky Air Ride Users USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat Latest reply, 5/19/2013 USAFretired: New part affects the tricky shock?Tricky Air Ride Users 12 posts, last by: USAFretired In: Bike Talk, 5/19/2013, 15 replies Subject: A Little Help! Phatstrat: Was doing Roadwing install, tightening banjo bolt on RAP under seat..........oh crap. Any ideas? RAP fits nicely under ... Latest reply, 5/19/2013 smokescreens: Glad your happy with it B)A Little Help! 16 posts, last by: smokescreens In: Non Motorcycle Topics, 5/19/2013, 6 replies Subject: This wll make your morning shave a bit nicer BuffaloRider: http://www.thinkgeek.com/product/1139/#tabs That is, if you still shave Latest reply, 5/19/2013 BuffaloRider: :laugh: :laugh: :laugh: No, it's actually the rear leg of a calf in the back ground. When you see ...This wll make your morning shave a bit nicer 7 posts, last by: BuffaloRider In: Bike Talk, 5/16/2013, 14 replies Subject: Running rich Ashley: I have not pulled the carb apart to see if it has been jetted but i have Vance & Hines Power shots that were on bike when i bought it . I did add K&N filter and did the crank case filter mod up under tank ... Latest reply, 5/19/2013 Ashley: :woohoo: :woohoo: :woohoo: Wasent raining when i got home so i went for a ride to test out the whole ...Running rich 15 posts, last by: Ashley In: Non Motorcycle Topics, 5/18/2013, 24 replies Subject: daughter wants to ride cike: don't want to sound like I descriminate against girls but I don't know how else to say it. What would you do if your daughter wanted to learn to ride? My daughter is 23 and has been riding on the back ... Latest reply, 5/19/2013 out2lunch: Agree on the bike choice. When new riders use a bike to learn that requires higher rev pts, they don't ...daughter wants to ride 25 posts, last by: out2lunch In: Bolt Ons, 5/19/2013, 4 replies Subject: Too much of a good thing . . ? maxtnet: I do love the sound of the V & H long shot slashed pipes which I use with the V & H Quite baffles (packed with 1/4" thick fiberglass), however when going on longer trips, the sound starts to get annoying. ... Latest reply, 5/19/2013 maxtnet: Thanks MidStar7 And a good joke at that with plenty of reality in it! Those are a lot of pipe changes.I ...Too much of a good thing . . ? 5 posts, last by: maxtnet In: Non Motorcycle Topics, 5/18/2013, 15 replies Subject: Wife's having a yard sale Stevie: She's got a metric sht ton of stuff out there I got a ice chest of corona out there, I'm out-selling her 2 to 1 :P Latest reply, 5/19/2013 blue_star: :laugh: :laugh: :laugh: :oops:Wife's having a yard sale 16 posts, last by: blue_star In: Bike Talk, 5/19/2013, 4 replies Subject: Removed AIS/relocated fuel pump bike won't start!! Signguy: Removed the AIS and relocated the fuel pump and now the bike won't start. PLEASE HELP Latest reply, 5/19/2013 Edge51: that was gonna be my answer to ya...saw it right off....hahaha:woohoo: :woohoo:Removed AIS/relocated fuel pump bike won't start!! 5 posts, last by: Edge51 In: Miscellaneous, 5/19/2013, 5 replies Subject: JD 1000 for sale GNR10: OK this is not a Honda Road Star, but it is a JD 1000 I ... Latest reply, 5/19/2013 kevstephenson7: Re:JD 1000 for sale 18 Minutes ago Well, it IS bigger than a jd750ace! Lol :laugh: :laugh:JD 1000 for sale 6 posts, last by: kevstephenson7 In: Bike Talk, 5/18/2013, 43 replies Subject: What do you think about while you are riding? mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ... Latest reply, 5/19/2013 02Yamaha: :laugh: NOT GETTING KILLED BY SOME DUMB AS CAGER DRIVING WITH THEIR HEAD UP THEIR ASS OR LOOKING AT THEIR ...What do you think about while you are riding? 44 posts, last by: 02Yamaha In: Body/Frame, 4/16/2013, 44 replies Subject: Rear Suspension double-check Ricohoc: I've gotten some expert advice in the last week, but my two experts may be asleep now. I crawled on the side of the bike, located the two nuts -- the adjusting nut and the lock nut. Noticed ... Latest reply, 5/19/2013 blue_star: It's a 32mm nut. And yes, it is a PITA to get to and adjust. :angry:Rear Suspension double-check 45 posts, last by: blue_star In: Bike Talk, 5/19/2013, 4 replies Subject: Need to reupholster pillion seat Slvrknght: So, rather than spend money I really don't have to get the actual pillion seat for my mustang saddle, I've modified my stock one to fit back on the bike. Unfortunately, this required pulling the covering ... Latest reply, 5/19/2013 Roadstarblue*: They have 1/4 " staples for the gun should be fine .Need to reupholster pillion seat 5 posts, last by: Roadstarblue

New Forum Posts

In: Bike Talk, 5/19/2013, 8 replies
Subject: Why are my pipes all blue under the heat shields
Stevie: I took the left heat shield off my Bassani duals to work on the pulley and underneath the heat shields the pipes are all discolored They are not discolored anywhere that shows, just underneath the heat ...

Latest reply, 5/19/2013
GNR10: Better than rusty :laugh:Why are my pipes all blue under the heat shields

9 posts, last by:

GNR10

In: Jetting, 5/14/2013, 18 replies
Subject: 2005 Roadstar
bob1964: Hello... I have a 2005 Roadstar and ever since ive had it ive had a problem that seems to be getting worse , its been back to the shop twice to be repaired , last time it came back the idle was set ...

Latest reply, 5/19/2013
bob1964: Thats what i did ....in thru the carbs first then took off the pipies and filled up the bores , stuffed ...2005 Roadstar

19 posts, last by:

bob1964

In: Rides, Meets, Events, 5/19/2013
Subject: Ruidoso, NM Apencash Rally
EPRoadie: Just got back from the hills of NM, NE of El Paso for the Rally and got some pics if photobucket is online or being a pain in the a** as always: bear with me ! ;)
Ruidoso, NM Apencash Rally

new topic by:

EPRoadie

In: Bike Talk, 5/19/2013, 10 replies
Subject: carb guru's / dyno need some advice
SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ...

Latest reply, 5/19/2013
SMOKINJOE: SKWEARpeg,,,,ERBMAN,,, thanks for the info and setting me straight. honestly i thought that the 11.8 ...carb guru's / dyno need some advice

11 posts, last by:

SMOKINJOE

In: Tech Tips, 4/7/2013, 185 replies
Subject: Giving the Roadstar Legs - Highway Gearing
pastornj: OK - I've put enough miles on this setup to feel comfortable discussing it and even recommending it. From the first time I rode my 2001 Roadstar I felt the gearing was too low - Yeah, I know that a ...

Latest reply, 5/19/2013
blue_star: That's what they make do-rags for. :PGiving the Roadstar Legs - Highway Gearing

186 posts, last by:

blue_star

In: Non Motorcycle Topics, 5/19/2013, 2 replies
Subject: Remington Rem Squeeg-E Universal Gun Cleaning kit
1700cc: Anybody familiar with this cleaning kit? For firearms. Found it on flea bay.

Latest reply, 5/19/2013
BBB: Those kits are awesome. You shouldn't have to buy anything else if you own traditional calibers. They ...Remington Rem Squeeg-E Universal Gun Cleaning kit

3 posts, last by:

BBB

In: Technical Discussions, 5/19/2013, 10 replies
Subject: Got any Cobra Slip on's?
Dysan911: Picked up a used V&H Long shots probably 2 years ago and they needed a lot of TLC to pass for what I would consider something I'd want bolted to my bike. They sound good but the chrome is really starting ...

Latest reply, 5/19/2013
wild_mac: i got a set of cobra slip ons guess i had em sealed up better then the rest cause they never back fired ...Got any Cobra Slip on's?

11 posts, last by:

wild_mac

In: Body/Frame, 5/18/2013, 25 replies
Subject: PAINT IS DONE!!!!!!
texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ...

Latest reply, 5/19/2013
pastornj: Well come on...get it done already!PAINT IS DONE!!!!!!

26 posts, last by:

pastornj

In: Non Motorcycle Topics, 5/19/2013, 1 reply
Subject: Kai, you OK ?
ironman: Just saw on the news, all the tornado's in Kansas. Kai, you & your family, riding bud's OK ? Prayin for ya :) :) :)

Latest reply, 5/19/2013
Kaidallac: Yup, thanks for the thoughts Ironman!!!Kai, you OK ?

2 posts, last by:

Kaidallac

In: Body/Frame, 3/31/2013, 54 replies
Subject: Spring Mods
Martorious: I know, this should have been done over the winter, but with my unheated garage and tight finances over the winter it just wasn't happening. I'm gonna miss the first part of riding season, but I'm hoping ...

Latest reply, 5/19/2013
Stephini3: Thanks for the compliment. I'm not doing any more painting without a paint booth. Are you ...Spring Mods

55 posts, last by:

Stephini3

In: Bike Talk, 5/18/2013, 12 replies
Subject: Burn cable
Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ...

Latest reply, 5/19/2013
Meitemark: My first test was to day with just 15-20 miles. I have roadwing,darkside (Austin taxi back wheel,150-80 ...Burn cable

13 posts, last by:

Meitemark

In: Maintenance, 5/19/2013, 14 replies
Subject: Normal ???
Ashley: When bike has been in garage all night and i crank it and let her warm up , when i go to put it in gear i pull clutch in a bunch of times and shift into second because if i dont it jerks hard into first ...

Latest reply, 5/19/2013
pastornj: Mine won't even start in 1st gear with the clutch in when it is cold - it would just take off down ...Normal ???

15 posts, last by:

pastornj

In: Bike Talk, 5/18/2013, 8 replies
Subject: Homemade AIS REMOVAL KIT??
Signguy: Can't I just make my own flange covers and plug? Seems easy

Latest reply, 5/19/2013
jd750ace: I can give you 30 pages on any given alloy and temper.:laugh: MMPDS-04 and T.O. 1-1A-9. Aviation ...Homemade AIS REMOVAL KIT??

9 posts, last by:

jd750ace

In: Bike Talk, 5/18/2013, 16 replies
Subject: Lindby bars
Roadstarcountryboy: Hey guys been looking for some unique highway bars for my 07 r*. Anybody have the lindby multibars? They look really cool and comfortable just expensive

Latest reply, 5/19/2013
Phatstrat: Or you can buy a set of Cobra Fattys for $175, send them to me and I'll give you my $300 Lindby Bar.Lindby bars

17 posts, last by:

Phatstrat

In: Bike Talk, 5/19/2013, 10 replies
Subject: Front Pulley Nut
Stevie: How tight are you guys tightening it? I notice mine was not tight at all when I took it off, I just barely tapped the breaker bar with my palm and it loosened right up I put it on the new pulley and ...

Latest reply, 5/19/2013
Vette468: Id hit with the next sized hammer.. Not a mallet.. its a big nut .Front Pulley Nut

11 posts, last by:

Vette468

In: Body/Frame, 5/19/2013, 3 replies
Subject: Leaky latch
BlueCoupe: After putting the Yamaha hard bags on my bike and washing them I noticed the latch button leaks water around them, is this normal and if so has anyone come up with a fix for this.

Latest reply, 5/19/2013
Greysnake: I took the latch off and found an o-ring that fit tight over the threads. Then tightened back up and ...Leaky latch

4 posts, last by:

Greysnake

In: Miscellaneous, 5/17/2013, 14 replies
Subject: Rain guards/soft lowers
cabtek: Got caught in rain and cold weather and was thinking it would be nice to get the wind off my legs when it's cold. Has anyone used rain guards or soft lowers? Do they affect engine cooling? Do they work? ...

Latest reply, 5/19/2013
cabtek: Thanks for all the input guys! Just got back from riding in upstate New York. Fun trip. Dave... ...Rain guards/soft lowers

15 posts, last by:

cabtek

In: Bike Talk, 5/19/2013, 15 replies
Subject: Removing Fuel Tank?
MartyN8677: Also changing my spark plugs today, so I need to remove the fuel tank. There is instruction in the Tech Articles for this, but I wonder if my 08 is different than the instructions? I don't see the ...

Latest reply, 5/19/2013
MartyN8677: Everything sure we back together a lot quicker than it came apart. No doubt will be much easier next ...Removing Fuel Tank?

16 posts, last by:

MartyN8677

In: Technical Discussions, 5/18/2013, 11 replies
Subject: Tricky Air Ride Users
USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat

Latest reply, 5/19/2013
USAFretired: New part affects the tricky shock?Tricky Air Ride Users

12 posts, last by:

USAFretired

In: Bike Talk, 5/19/2013, 15 replies
Subject: A Little Help!
Phatstrat: Was doing Roadwing install, tightening banjo bolt on RAP under seat..........oh crap. Any ideas? RAP fits nicely under ...

Latest reply, 5/19/2013
smokescreens: Glad your happy with it B)A Little Help!

16 posts, last by:

smokescreens

In: Non Motorcycle Topics, 5/19/2013, 6 replies
Subject: This wll make your morning shave a bit nicer
BuffaloRider: http://www.thinkgeek.com/product/1139/#tabs That is, if you still shave

Latest reply, 5/19/2013
BuffaloRider: :laugh: :laugh: :laugh: No, it's actually the rear leg of a calf in the back ground. When you see ...This wll make your morning shave a bit nicer

7 posts, last by:

BuffaloRider

In: Bike Talk, 5/16/2013, 14 replies
Subject: Running rich
Ashley: I have not pulled the carb apart to see if it has been jetted but i have Vance & Hines Power shots that were on bike when i bought it . I did add K&N filter and did the crank case filter mod up under tank ...

Latest reply, 5/19/2013
Ashley: :woohoo: :woohoo: :woohoo: Wasent raining when i got home so i went for a ride to test out the whole ...Running rich

15 posts, last by:

Ashley

In: Non Motorcycle Topics, 5/18/2013, 24 replies
Subject: daughter wants to ride
cike: don't want to sound like I descriminate against girls but I don't know how else to say it. What would you do if your daughter wanted to learn to ride? My daughter is 23 and has been riding on the back ...

Latest reply, 5/19/2013
out2lunch: Agree on the bike choice. When new riders use a bike to learn that requires higher rev pts, they don't ...daughter wants to ride

25 posts, last by:

out2lunch

In: Bolt Ons, 5/19/2013, 4 replies
Subject: Too much of a good thing . . ?
maxtnet: I do love the sound of the V & H long shot slashed pipes which I use with the V & H Quite baffles (packed with 1/4" thick fiberglass), however when going on longer trips, the sound starts to get annoying. ...

Latest reply, 5/19/2013
maxtnet: Thanks MidStar7 And a good joke at that with plenty of reality in it! Those are a lot of pipe changes.I ...Too much of a good thing . . ?

5 posts, last by:

maxtnet

In: Non Motorcycle Topics, 5/18/2013, 15 replies
Subject: Wife's having a yard sale
Stevie: She's got a metric sh*t ton of stuff out there I got a ice chest of corona out there, I'm out-selling her 2 to 1 :P

Latest reply, 5/19/2013
blue_star: :laugh: :laugh: :laugh: :oops:Wife's having a yard sale

16 posts, last by:

blue_star

In: Bike Talk, 5/19/2013, 4 replies
Subject: Removed AIS/relocated fuel pump bike won't start!!
Signguy: Removed the AIS and relocated the fuel pump and now the bike won't start. PLEASE HELP

Latest reply, 5/19/2013
Edge51: that was gonna be my answer to ya...saw it right off....hahaha:woohoo: :woohoo:Removed AIS/relocated fuel pump bike won't start!!

5 posts, last by:

Edge51

In: Miscellaneous, 5/19/2013, 5 replies
Subject: JD 1000 for sale
GNR10: OK this is not a Honda Road Star, but it is a JD 1000 I ...

Latest reply, 5/19/2013
kevstephenson7: Re:JD 1000 for sale 18 Minutes ago Well, it IS bigger than a jd750ace! Lol :laugh: :laugh:JD 1000 for sale

6 posts, last by:

kevstephenson7

In: Bike Talk, 5/18/2013, 43 replies
Subject: What do you think about while you are riding?
mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ...

Latest reply, 5/19/2013
02Yamaha: :laugh: NOT GETTING KILLED BY SOME DUMB AS CAGER DRIVING WITH THEIR HEAD UP THEIR ASS OR LOOKING AT THEIR ...What do you think about while you are riding?

44 posts, last by:

02Yamaha

In: Body/Frame, 4/16/2013, 44 replies
Subject: Rear Suspension double-check
Ricohoc: I've gotten some expert advice in the last week, but my two experts may be asleep now. I crawled on the side of the bike, located the two nuts -- the adjusting nut and the lock nut. Noticed ...

Latest reply, 5/19/2013
blue_star: It's a 32mm nut. And yes, it is a PITA to get to and adjust. :angry:Rear Suspension double-check

45 posts, last by:

blue_star

In: Bike Talk, 5/19/2013, 4 replies
Subject: Need to reupholster pillion seat
Slvrknght: So, rather than spend money I really don't have to get the actual pillion seat for my mustang saddle, I've modified my stock one to fit back on the bike. Unfortunately, this required pulling the covering ...

Latest reply, 5/19/2013
Roadstarblue: They have 1/4 " staples for the gun should be fine .Need to reupholster pillion seat

5 posts, last by:

Roadstarblue

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.