Re:No start Roadstar - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Electrical/Electronics

Re:No start Roadstar

Favoured: 0

TOPIC: Re:No start Roadstar

Forum Tools

#498333

brown91redcam (User)

Another Day In the Wind

Platinum Boarder

Posts: 2074

No start Roadstar 11 Months, 3 Weeks ago

Alright I am asking for help with my Father in laws 2005 Roadstar I would look at it myself but he is in Florida and I am in Michigan so little to far to help him out,from what I have heard it will not crank over for him,he has jumped it at solenoid and starter is ok,said he traced and checked the wiring and can't figure it out,has tank off and headlight pulled apart checking wiring,I guess he tried installing a push button starter in a hole he drilled in sidecover

and hooked to solenoid and just melted the wires on that,he is a old harley guy and not a fan of the Roadstar right now

,he thinks the problem is with the ignition module so he is looking for one of those

don't think that has anything to do with starting just running I believe,he seems to be at a loss and I am wondering on the solenoid itself so here it is I am open to suggestions I can give him he does not do much with computers so thought I would ask for him,thanks as always for any ideas or suggestions,bike has about 10,000 miles on it and was purchased new,sorry for long post

Logged

The administrator has disabled public write access.

#498355

Erbman02 (User)

Platinum Boarder

Posts: 5247

Re:No start Roadstar 11 Months, 3 Weeks ago
where in Fl, there are plenty of us down this way. Maybe one can give a hand?

Logged

The administrator has disabled public write access.

#498358

brown91redcam (User)

Another Day In the Wind

Platinum Boarder

Posts: 2074

Re:No start Roadstar 11 Months, 3 Weeks ago
Erbman02 wrote: where in Fl, there are plenty of us down this way. Maybe one can give a hand? I will have to find out don't remember exactly where he is only been able to make it down for a visit once but would be great if someone could do that,its hard to diagnose without being able to look at the bike

Logged

The administrator has disabled public write access.

#498496

brown91redcam (User)

Another Day In the Wind

Platinum Boarder

Posts: 2074

Re:No start Roadstar 11 Months, 3 Weeks ago
He is located in Avon Park,anyone have any suggestions for no start issue?

Logged

The administrator has disabled public write access.

#498531

SKWEARpeg (User)

Platinum Boarder

Posts: 5245

Re:No start Roadstar 11 Months, 3 Weeks ago
Did he try replacing the relay, or just jump across? As many as have had issues, it sounds like a good first step. Decompression solenoid? If he removes the cover, he can manipulate it by hand.

Logged

Last Edit: 2012/06/02 12:10 By SKWEARpeg.

The administrator has disabled public write access.

#498540

ultrastar (User)

Keep The Speedometer Side Up

Platinum Boarder

Posts: 4057

Re:No start Roadstar 11 Months, 3 Weeks ago

brown91redcam wrote:
Alright I am asking for help with my Father in laws 2005 Roadstar I would look at it myself but he is in Florida and I am in Michigan so little to far to help him out,from what I have heard it will not crank over for him,he has jumped it at solenoid and starter is ok,said he traced and checked the wiring and can't figure it out,has tank off and headlight pulled apart checking wiring,I guess he tried installing a push button starter in a hole he drilled in sidecover

and hooked to solenoid and just melted the wires on that,he is a old harley guy and not a fan of the Roadstar right now

,he thinks the problem is with the ignition module so he is looking for one of those

it sounds to me that it has to do with something he did when hooking up the start button if it was me I would put it back to stock and see what happens
[quote] (he is a old harley guy and not a fan of the Roadstar right now) this is something that he did its not the bike falt

Logged

Keep The Speedometer Side

The administrator has disabled public write access.

#498559

brown91redcam (User)

Another Day In the Wind

Platinum Boarder

Posts: 2074

Re:No start Roadstar 11 Months, 3 Weeks ago
Yeah Ultrastar he has no patience for it anymore,he hooked up the button to relay trying to solve the no crank problem and fried wires because to much load across switch instead of solenoid I dont think he has replaced it yet just jumped across to make it crank over I guess I am getting details from brother in law is talking to him and because I ride a Roadstar they ask me

Logged

The administrator has disabled public write access.

#498564

ultrastar (User)

Keep The Speedometer Side Up

Platinum Boarder

Posts: 4057

Re:No start Roadstar 11 Months, 3 Weeks ago
I think it was takehikes (Brent) who did the same thing and had tha same problem hopefully he'll see this and be able to give you an answer

Logged

Keep The Speedometer Side

The administrator has disabled public write access.

Forum List

Technical Corner

Electrical/Electronics

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Pics of My Ride, 5/19/2013, 1 reply Subject: Sneak Peek Bryan76: Primed and painted. Still needs to be wet sanded and buffed. [img ... Latest reply, 5/19/2013 brown91redcam: Gonna look nice when you get it all together,paints looking greatSneak Peek 2 posts, last by: brown91redcam In: Rides, Meets, Events, 5/19/2013 Subject: Good day on a Roadstar brown91redcam: Set out for our yearly ride too the Blessing of the Bikes today in Baldwin,Mi. Four of us headed out and only my Roadstar actually made it:laugh: not :bbash: but the other 3 were HD,2 are my brother-in-laws ... Good day on a Roadstar new topic by: brown91redcam In: Non Motorcycle Topics, 5/19/2013, 9 replies Subject: huge mileage increase! jd750ace: OK, not a bike, but I finally got a chance to change the fuel injection spider on my 'ol 98 Chevy, thanks to guidance from a couple of members here, and WOW! Finally, it makes acceleration power again, ... Latest reply, 5/19/2013 jd750ace: I'll take that mileage any day. It's THE reason I bought he truck I did. Already dropped one of these ...huge mileage increase! 10 posts, last by: jd750ace In: Bike Talk, 5/19/2013, 4 replies Subject: Weekend project finished Signguy: AIS removed and fuel pump relocated. Oh...and I painted it too. :woohoo: Latest reply, 5/19/2013 cike: I like it. Seat looks really good on there.Weekend project finished 5 posts, last by: cike In: Non Motorcycle Topics, 5/19/2013, 5 replies Subject: Kai, you OK ? ironman: Just saw on the news, all the tornado's in Kansas. Kai, you & your family, riding bud's OK ? Prayin for ya :) :) :) Latest reply, 5/19/2013 Bryan76: +1 +2Kai, you OK ? 6 posts, last by: Bryan76 In: Body/Frame, 5/18/2013, 27 replies Subject: PAINT IS DONE!!!!!! texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ... Latest reply, 5/19/2013 Bryan76: Very nice color choice! Can't wait to see it on the bike!PAINT IS DONE!!!!!! 28 posts, last by: Bryan76 In: Jetting, 5/14/2013, 19 replies Subject: 2005 Roadstar bob1964: Hello... I have a 2005 Roadstar and ever since ive had it ive had a problem that seems to be getting worse , its been back to the shop twice to be repaired , last time it came back the idle was set ... Latest reply, 5/19/2013 SKWEARpeg: I'll bump this, so it stays up. Maybe I'll have an epiphany between now and then, or somebody else ...2005 Roadstar 20 posts, last by: SKWEARpeg In: Miscellaneous, 5/17/2013, 16 replies Subject: Rain guards/soft lowers cabtek: Got caught in rain and cold weather and was thinking it would be nice to get the wind off my legs when it's cold. Has anyone used rain guards or soft lowers? Do they affect engine cooling? Do they work? ... Latest reply, 5/19/2013 SKWEARpeg: all i can tell you is from my own experience using the strap on type, my bike will overheat with them ...Rain guards/soft lowers 17 posts, last by: SKWEARpeg In: Bike Talk, 5/19/2013, 13 replies Subject: carb guru's / dyno need some advice SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ... Latest reply, 5/19/2013 SKWEARpeg: The 04 and later ignitors, already rev to 4750 rpm, and the bike is still gaining speed up there, but ...carb guru's / dyno need some advice 14 posts, last by: SKWEARpeg In: Tech Tips, 4/7/2013, 190 replies Subject: Giving the Roadstar Legs - Highway Gearing pastornj: OK - I've put enough miles on this setup to feel comfortable discussing it and even recommending it. From the first time I rode my 2001 Roadstar I felt the gearing was too low - Yeah, I know that a ... Latest reply, 5/19/2013 Stevie: why? I bought 1 1/2" front pulley that was the plan Is the 1 1/2" rear pulley and ...Giving the Roadstar Legs - Highway Gearing 191 posts, last by: Stevie In: Bike Talk, 5/18/2013, 17 replies Subject: Lindby bars Roadstarcountryboy: Hey guys been looking for some unique highway bars for my 07 r. Anybody have the lindby multibars? They look really cool and comfortable just expensive Latest reply, 5/19/2013 jd750ace: That's the kind of problem solving you'll only find here folks!:laugh:Lindby bars 18 posts, last by: jd750ace In: Bike Talk, 5/19/2013, 5 replies Subject: help stranded in phx az need an idle mixture screw moespeeds: I'm in fountain hills, az and my idle mixture screw has fallen out and its gone. I live in nj and fly home tmrw afternoon. Anyone in the phx area have one? I'll order you a new one on the spot and ship ... Latest reply, 5/19/2013 Curt: Bump to keep this at the top.help stranded in phx az need an idle mixture screw 6 posts, last by: Curt In: Bike Talk, 5/18/2013, 13 replies Subject: Burn cable Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ... Latest reply, 5/19/2013 jd750ace: Glad to hear you are pleased with it. It's a good suspension combination.Burn cable 14 posts, last by: jd750ace In: Maintenance, 5/19/2013, 16 replies Subject: Normal ??? Ashley: When bike has been in garage all night and i crank it and let her warm up , when i go to put it in gear i pull clutch in a bunch of times and shift into second because if i dont it jerks hard into first ... Latest reply, 5/19/2013 JimH: Same here,i usually pull the lever a couple of times and it's good to go.Normal ??? 17 posts, last by: JimH In: Technical Discussions, 5/19/2013, 7 replies Subject: Exhaust Advice BBB: I put some Hard Krome pipes on my '99 R that I originally loved, but now I theorize that my neighbors are not thrilled by them. They're not baffle-less loud, but I'd like to quiet them down so I can ... Latest reply, 5/19/2013 BBB: No worries..thanks for trying.Exhaust Advice 8 posts, last by: BBB In: Miscellaneous, 5/19/2013, 2 replies Subject: YAMAHA ROADSTAR BIG WHEEL FAT WHEEL SPOKED GNR10: Okay, anybody looking for a 7" wide rear spoked wheel heeeere you go... UP FOR AUCTION IS A USED BIG/FAT/OVERSIZED WHEEL THAT MEASURES 7" WIDE FOR THE YAMAHA ROADSTAR'S. I BELIEVE THIS IS ... Latest reply, 5/19/2013 jd750ace: I don't do "rear tire size envy" :laugh: If it don't work better, it ain't worth the money. I can't ...YAMAHA ROADSTAR BIG WHEEL FAT WHEEL SPOKED 3 posts, last by: jd750ace In: Bike Talk, 5/18/2013, 10 replies Subject: Homemade AIS REMOVAL KIT?? Signguy: Can't I just make my own flange covers and plug? Seems easy Latest reply, 5/19/2013 jd750ace: True. Not like it's holding the ocean back or anything. :laugh:Homemade AIS REMOVAL KIT?? 11 posts, last by: jd750ace In: Bike Talk, 5/19/2013, 12 replies Subject: Why are my pipes all blue under the heat shields Stevie: I took the left heat shield off my Bassani duals to work on the pulley and underneath the heat shields the pipes are all discolored They are not discolored anywhere that shows, just underneath the heat ... Latest reply, 5/19/2013 jd750ace: Aluminum generally degrades to aluminum oxide when it corrodes. Heat accelerates corrosion. Typical ...Why are my pipes all blue under the heat shields 13 posts, last by: jd750ace In: Body/Frame, 3/31/2013, 55 replies Subject: Spring Mods Martorious: I know, this should have been done over the winter, but with my unheated garage and tight finances over the winter it just wasn't happening. I'm gonna miss the first part of riding season, but I'm hoping ... Latest reply, 5/19/2013 Martorious: It's official, I have created a monster!:laugh: :laugh: :laugh:Spring Mods 56 posts, last by: Martorious In: Bike Talk, 5/18/2013, 45 replies Subject: What do you think about while you are riding? mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ... Latest reply, 5/19/2013 gfolkert: I forget. Except I do think about the road in front of me and plan for escape from the idiot other ...What do you think about while you are riding? 46 posts, last by: gfolkert In: Miscellaneous, 5/19/2013, 7 replies Subject: JD 1000 for sale GNR10: OK this is not a Honda Road Star, but it is a JD 1000 I ... Latest reply, 5/19/2013 Vette468: Id take me a Kawi Chopper ! Just for the SOUND !JD 1000 for sale 8 posts, last by: Vette468 In: Bolt Ons, 5/19/2013, 5 replies Subject: Too much of a good thing . . ? maxtnet: I do love the sound of the V & H long shot slashed pipes which I use with the V & H Quite baffles (packed with 1/4" thick fiberglass), however when going on longer trips, the sound starts to get annoying. ... Latest reply, 5/19/2013 coot53: I have the exact setup you mentioned, The BCT QQ baffels up front and a modified V & H quiet baffel in ...Too much of a good thing . . ? 6 posts, last by: coot53 In: Miscellaneous, 5/18/2013, 7 replies Subject: Road Star Parts vendor roady4me: I tried to order from them last year and never got the order. Could not reach them by phone or email. Latest reply, 5/19/2013 gfolkert: I tried to order from them last year and never got the order. Could not reach them by phone or email. Please ...Road Star Parts vendor 8 posts, last by: gfolkert In: Rides, Meets, Events, 5/19/2013, 1 reply Subject: Ruidoso, NM Apencash Rally EPRoadie: Just got back from the hills of NM, NE of El Paso for the Rally and got some pics if photobucket is online or being a pain in the a as always: bear with me ! ;) Will post pics ASAP ! [img ... Latest reply, 5/19/2013 blue_star: :popcorn: :popcorn: :popcorn:Ruidoso, NM Apencash Rally 2 posts, last by: blue_star In: Non Motorcycle Topics, 5/19/2013, 2 replies Subject: Remington Rem Squeeg-E Universal Gun Cleaning kit 1700cc: Anybody familiar with this cleaning kit? For firearms. Found it on flea bay. Latest reply, 5/19/2013 BBB: Those kits are awesome. You shouldn't have to buy anything else if you own traditional calibers. They ...Remington Rem Squeeg-E Universal Gun Cleaning kit 3 posts, last by: BBB In: Technical Discussions, 5/19/2013, 10 replies Subject: Got any Cobra Slip on's? Dysan911: Picked up a used V&H Long shots probably 2 years ago and they needed a lot of TLC to pass for what I would consider something I'd want bolted to my bike. They sound good but the chrome is really starting ... Latest reply, 5/19/2013 wild_mac: i got a set of cobra slip ons guess i had em sealed up better then the rest cause they never back fired ...Got any Cobra Slip on's? 11 posts, last by: wild_mac In: Bike Talk, 5/19/2013, 10 replies Subject: Front Pulley Nut Stevie: How tight are you guys tightening it? I notice mine was not tight at all when I took it off, I just barely tapped the breaker bar with my palm and it loosened right up I put it on the new pulley and ... Latest reply, 5/19/2013 Vette468: Id hit with the next sized hammer.. Not a mallet.. its a big nut .Front Pulley Nut 11 posts, last by: Vette468 In: Body/Frame, 5/19/2013, 3 replies Subject: Leaky latch BlueCoupe: After putting the Yamaha hard bags on my bike and washing them I noticed the latch button leaks water around them, is this normal and if so has anyone come up with a fix for this. Latest reply, 5/19/2013 Greysnake: I took the latch off and found an o-ring that fit tight over the threads. Then tightened back up and ...Leaky latch 4 posts, last by: Greysnake In: Bike Talk, 5/19/2013, 15 replies Subject: Removing Fuel Tank? MartyN8677: Also changing my spark plugs today, so I need to remove the fuel tank. There is instruction in the Tech Articles for this, but I wonder if my 08 is different than the instructions? I don't see the ... Latest reply, 5/19/2013 MartyN8677: Everything sure we back together a lot quicker than it came apart. No doubt will be much easier next ...Removing Fuel Tank? 16 posts, last by: MartyN8677 In: Technical Discussions, 5/18/2013, 11 replies Subject: Tricky Air Ride Users USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat Latest reply, 5/19/2013 USAFretired**: New part affects the tricky shock?Tricky Air Ride Users 12 posts, last by: USAFretired

New Forum Posts

In: Pics of My Ride, 5/19/2013, 1 reply
Subject: Sneak Peek
Bryan76: Primed and painted. Still needs to be wet sanded and buffed. [img ...

Latest reply, 5/19/2013
brown91redcam: Gonna look nice when you get it all together,paints looking greatSneak Peek

2 posts, last by:

brown91redcam

In: Rides, Meets, Events, 5/19/2013
Subject: Good day on a Roadstar
brown91redcam: Set out for our yearly ride too the Blessing of the Bikes today in Baldwin,Mi. Four of us headed out and only my Roadstar actually made it:laugh: not :bbash: but the other 3 were HD,2 are my brother-in-laws ...
Good day on a Roadstar

new topic by:

brown91redcam

In: Non Motorcycle Topics, 5/19/2013, 9 replies
Subject: huge mileage increase!
jd750ace: OK, not a bike, but I finally got a chance to change the fuel injection spider on my 'ol 98 Chevy, thanks to guidance from a couple of members here, and WOW! Finally, it makes acceleration power again, ...

Latest reply, 5/19/2013
jd750ace: I'll take that mileage any day. It's THE reason I bought he truck I did. Already dropped one of these ...huge mileage increase!

10 posts, last by:

jd750ace

In: Bike Talk, 5/19/2013, 4 replies
Subject: Weekend project finished
Signguy: AIS removed and fuel pump relocated. Oh...and I painted it too. :woohoo:

Latest reply, 5/19/2013
cike: I like it. Seat looks really good on there.Weekend project finished

5 posts, last by:

cike

In: Non Motorcycle Topics, 5/19/2013, 5 replies
Subject: Kai, you OK ?
ironman: Just saw on the news, all the tornado's in Kansas. Kai, you & your family, riding bud's OK ? Prayin for ya :) :) :)

Latest reply, 5/19/2013
Bryan76: +1 +2Kai, you OK ?

6 posts, last by:

Bryan76

In: Body/Frame, 5/18/2013, 27 replies
Subject: PAINT IS DONE!!!!!!
texanrebel82: Man im pumped up my paint is done...the guy painting just sent me some pics and man that copper pearl looks awesome. I will be picking them up tonight will post pics tomorrow....im gonna make sure everything ...

Latest reply, 5/19/2013
Bryan76: Very nice color choice! Can't wait to see it on the bike!PAINT IS DONE!!!!!!

28 posts, last by:

Bryan76

In: Jetting, 5/14/2013, 19 replies
Subject: 2005 Roadstar
bob1964: Hello... I have a 2005 Roadstar and ever since ive had it ive had a problem that seems to be getting worse , its been back to the shop twice to be repaired , last time it came back the idle was set ...

Latest reply, 5/19/2013
SKWEARpeg: I'll bump this, so it stays up. Maybe I'll have an epiphany between now and then, or somebody else ...2005 Roadstar

20 posts, last by:

SKWEARpeg

In: Miscellaneous, 5/17/2013, 16 replies
Subject: Rain guards/soft lowers
cabtek: Got caught in rain and cold weather and was thinking it would be nice to get the wind off my legs when it's cold. Has anyone used rain guards or soft lowers? Do they affect engine cooling? Do they work? ...

Latest reply, 5/19/2013
SKWEARpeg: all i can tell you is from my own experience using the strap on type, my bike will overheat with them ...Rain guards/soft lowers

17 posts, last by:

SKWEARpeg

In: Bike Talk, 5/19/2013, 13 replies
Subject: carb guru's / dyno need some advice
SMOKINJOE: had my bike dyno yesterday while i was at myrtle beach for bike week. from the dyno sheet : horse power 65.24, torque 97.16, ...

Latest reply, 5/19/2013
SKWEARpeg: The 04 and later ignitors, already rev to 4750 rpm, and the bike is still gaining speed up there, but ...carb guru's / dyno need some advice

14 posts, last by:

SKWEARpeg

In: Tech Tips, 4/7/2013, 190 replies
Subject: Giving the Roadstar Legs - Highway Gearing
pastornj: OK - I've put enough miles on this setup to feel comfortable discussing it and even recommending it. From the first time I rode my 2001 Roadstar I felt the gearing was too low - Yeah, I know that a ...

Latest reply, 5/19/2013
Stevie: why? I bought 1 1/2" front pulley that was the plan Is the 1 1/2" rear pulley and ...Giving the Roadstar Legs - Highway Gearing

191 posts, last by:

Stevie

In: Bike Talk, 5/18/2013, 17 replies
Subject: Lindby bars
Roadstarcountryboy: Hey guys been looking for some unique highway bars for my 07 r*. Anybody have the lindby multibars? They look really cool and comfortable just expensive

Latest reply, 5/19/2013
jd750ace: That's the kind of problem solving you'll only find here folks!:laugh:Lindby bars

18 posts, last by:

jd750ace

In: Bike Talk, 5/19/2013, 5 replies
Subject: help stranded in phx az need an idle mixture screw
moespeeds: I'm in fountain hills, az and my idle mixture screw has fallen out and its gone. I live in nj and fly home tmrw afternoon. Anyone in the phx area have one? I'll order you a new one on the spot and ship ...

Latest reply, 5/19/2013
Curt: Bump to keep this at the top.help stranded in phx az need an idle mixture screw

6 posts, last by:

Curt

In: Bike Talk, 5/18/2013, 13 replies
Subject: Burn cable
Meitemark: I had just changed the front fork with Race tech and emulators and was going for a trip. Started the bike and some smoke came from left blinker. Stopped at once and the blue cable from left blinker down ...

Latest reply, 5/19/2013
jd750ace: Glad to hear you are pleased with it. It's a good suspension combination.Burn cable

14 posts, last by:

jd750ace

In: Maintenance, 5/19/2013, 16 replies
Subject: Normal ???
Ashley: When bike has been in garage all night and i crank it and let her warm up , when i go to put it in gear i pull clutch in a bunch of times and shift into second because if i dont it jerks hard into first ...

Latest reply, 5/19/2013
JimH: Same here,i usually pull the lever a couple of times and it's good to go.Normal ???

17 posts, last by:

JimH

In: Technical Discussions, 5/19/2013, 7 replies
Subject: Exhaust Advice
BBB: I put some Hard Krome pipes on my '99 R* that I originally loved, but now I theorize that my neighbors are not thrilled by them. They're not baffle-less loud, but I'd like to quiet them down so I can ...

Latest reply, 5/19/2013
BBB: No worries..thanks for trying.Exhaust Advice

8 posts, last by:

BBB

In: Miscellaneous, 5/19/2013, 2 replies
Subject: YAMAHA ROADSTAR BIG WHEEL FAT WHEEL SPOKED
GNR10: Okay, anybody looking for a 7" wide rear spoked wheel heeeere you go... UP FOR AUCTION IS A USED BIG/FAT/OVERSIZED WHEEL THAT MEASURES 7" WIDE FOR THE YAMAHA ROADSTAR'S. I BELIEVE THIS IS ...

Latest reply, 5/19/2013
jd750ace: I don't do "rear tire size envy" :laugh: If it don't work better, it ain't worth the money. I can't ...YAMAHA ROADSTAR BIG WHEEL FAT WHEEL SPOKED

3 posts, last by:

jd750ace

In: Bike Talk, 5/18/2013, 10 replies
Subject: Homemade AIS REMOVAL KIT??
Signguy: Can't I just make my own flange covers and plug? Seems easy

Latest reply, 5/19/2013
jd750ace: True. Not like it's holding the ocean back or anything. :laugh:Homemade AIS REMOVAL KIT??

11 posts, last by:

jd750ace

In: Bike Talk, 5/19/2013, 12 replies
Subject: Why are my pipes all blue under the heat shields
Stevie: I took the left heat shield off my Bassani duals to work on the pulley and underneath the heat shields the pipes are all discolored They are not discolored anywhere that shows, just underneath the heat ...

Latest reply, 5/19/2013
jd750ace: Aluminum generally degrades to aluminum oxide when it corrodes. Heat accelerates corrosion. Typical ...Why are my pipes all blue under the heat shields

13 posts, last by:

jd750ace

In: Body/Frame, 3/31/2013, 55 replies
Subject: Spring Mods
Martorious: I know, this should have been done over the winter, but with my unheated garage and tight finances over the winter it just wasn't happening. I'm gonna miss the first part of riding season, but I'm hoping ...

Latest reply, 5/19/2013
Martorious: It's official, I have created a monster!:laugh: :laugh: :laugh:Spring Mods

56 posts, last by:

Martorious

In: Bike Talk, 5/18/2013, 45 replies
Subject: What do you think about while you are riding?
mrjeff: On our recent road trip we had many miles to think about things and because our bike communicators don't work very good at highway speeds we had a lot of quiet time for thoughtful reflection. At one of ...

Latest reply, 5/19/2013
gfolkert: I forget. Except I do think about the road in front of me and plan for escape from the idiot other ...What do you think about while you are riding?

46 posts, last by:

gfolkert

In: Miscellaneous, 5/19/2013, 7 replies
Subject: JD 1000 for sale
GNR10: OK this is not a Honda Road Star, but it is a JD 1000 I ...

Latest reply, 5/19/2013
Vette468: Id take me a Kawi Chopper ! Just for the SOUND !JD 1000 for sale

8 posts, last by:

Vette468

In: Bolt Ons, 5/19/2013, 5 replies
Subject: Too much of a good thing . . ?
maxtnet: I do love the sound of the V & H long shot slashed pipes which I use with the V & H Quite baffles (packed with 1/4" thick fiberglass), however when going on longer trips, the sound starts to get annoying. ...

Latest reply, 5/19/2013
coot53: I have the exact setup you mentioned, The BCT QQ baffels up front and a modified V & H quiet baffel in ...Too much of a good thing . . ?

6 posts, last by:

coot53

In: Miscellaneous, 5/18/2013, 7 replies
Subject: Road Star Parts vendor
roady4me: I tried to order from them last year and never got the order. Could not reach them by phone or email.

Latest reply, 5/19/2013
gfolkert: I tried to order from them last year and never got the order. Could not reach them by phone or email. Please ...Road Star Parts vendor

8 posts, last by:

gfolkert

In: Rides, Meets, Events, 5/19/2013, 1 reply
Subject: Ruidoso, NM Apencash Rally
EPRoadie: Just got back from the hills of NM, NE of El Paso for the Rally and got some pics if photobucket is online or being a pain in the a** as always: bear with me ! ;) Will post pics ASAP ! [img ...

Latest reply, 5/19/2013
blue_star: :popcorn: :popcorn: :popcorn:Ruidoso, NM Apencash Rally

2 posts, last by:

blue_star

In: Non Motorcycle Topics, 5/19/2013, 2 replies
Subject: Remington Rem Squeeg-E Universal Gun Cleaning kit
1700cc: Anybody familiar with this cleaning kit? For firearms. Found it on flea bay.

Latest reply, 5/19/2013
BBB: Those kits are awesome. You shouldn't have to buy anything else if you own traditional calibers. They ...Remington Rem Squeeg-E Universal Gun Cleaning kit

3 posts, last by:

BBB

In: Technical Discussions, 5/19/2013, 10 replies
Subject: Got any Cobra Slip on's?
Dysan911: Picked up a used V&H Long shots probably 2 years ago and they needed a lot of TLC to pass for what I would consider something I'd want bolted to my bike. They sound good but the chrome is really starting ...

Latest reply, 5/19/2013
wild_mac: i got a set of cobra slip ons guess i had em sealed up better then the rest cause they never back fired ...Got any Cobra Slip on's?

11 posts, last by:

wild_mac

In: Bike Talk, 5/19/2013, 10 replies
Subject: Front Pulley Nut
Stevie: How tight are you guys tightening it? I notice mine was not tight at all when I took it off, I just barely tapped the breaker bar with my palm and it loosened right up I put it on the new pulley and ...

Latest reply, 5/19/2013
Vette468: Id hit with the next sized hammer.. Not a mallet.. its a big nut .Front Pulley Nut

11 posts, last by:

Vette468

In: Body/Frame, 5/19/2013, 3 replies
Subject: Leaky latch
BlueCoupe: After putting the Yamaha hard bags on my bike and washing them I noticed the latch button leaks water around them, is this normal and if so has anyone come up with a fix for this.

Latest reply, 5/19/2013
Greysnake: I took the latch off and found an o-ring that fit tight over the threads. Then tightened back up and ...Leaky latch

4 posts, last by:

Greysnake

In: Bike Talk, 5/19/2013, 15 replies
Subject: Removing Fuel Tank?
MartyN8677: Also changing my spark plugs today, so I need to remove the fuel tank. There is instruction in the Tech Articles for this, but I wonder if my 08 is different than the instructions? I don't see the ...

Latest reply, 5/19/2013
MartyN8677: Everything sure we back together a lot quicker than it came apart. No doubt will be much easier next ...Removing Fuel Tank?

16 posts, last by:

MartyN8677

In: Technical Discussions, 5/18/2013, 11 replies
Subject: Tricky Air Ride Users
USAFretired: Have a question for those who have or had the Tricky Air ride shock. How much pressure did you ride with in the shock? Did you ride with the shock maxed out? Thanks, Pat

Latest reply, 5/19/2013
USAFretired: New part affects the tricky shock?Tricky Air Ride Users

12 posts, last by:

USAFretired

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.