Road Star Clinic Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

TOPIC: Re:Burly Brand Beach Retro Bar question Forum Tools Post New Topic Show latest posts Rules

#99661 vpower (User) Fresh Boarder Posts: 12 Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   Hello. I would like to buy "Burly Brand Beach Retro Bar 1 inch" for my RS. Do you have any experience with this bar? I'm going to order it at my local Custom HD dealer and in his catalouge there are 2 options: beach bar for up to 1982 HD models and from 1982 HD models. Which one should I order? Any hints? Below the picture of the bar that I want: http://www.cruisercustomizing.com/detail.cfm?model_ID=39&Category_ID=10&manufacturer_ID=32&product_ID=19145&related=short Is it better to take the one with dimples or without? Best regards from Germany. Greg   Logged     The administrator has disabled public write access. #99670 RoadstarB (User) Take off work and RIDE, You can work anytime. Gold Boarder Posts: 685 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   Order the ones before 1982. You do not want the dimples in the bends of the bar. The dimples are used on the new HDs so the wiring would fit under the control clamp, our wiring comes out behind the controls so we don't need the dimples.   Logged       The administrator has disabled public write access. #99685 vpower (User) Fresh Boarder Posts: 12 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   Thanks. That's the answer I was looking for.   Logged     The administrator has disabled public write access. #99744 Jimtec (User) Fresh Boarder Posts: 17 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   WARNING: These bars will not fit your risers! They neck down from 1.25" to 1" at the controls and risers, the problem is that Harley risers are spaced at 3.5" center to center and Yamaha is spaced at 4", the neck down will be inside your riser. Yamaha risers can be machined to accomidate the bars but this is not a bolt on. Jim   Logged       The administrator has disabled public write access. #99770 smhowse (User) NOPE, it's a Roadstar! Platinum Boarder Posts: 1463 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   I've got Barons Nostalgia Bar $80 same type of thing.   Logged     2005 Midnight Silverado   The administrator has disabled public write access. #100291 vpower (User) Fresh Boarder Posts: 12 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   Jimtec wrote: WARNING: These bars will not fit your risers! They neck down from 1.25" to 1" at the controls and risers, the problem is that Harley risers are spaced at 3.5" center to center and Yamaha is spaced at 4", the neck down will be inside your riser. Yamaha risers can be machined to accomidate the bars but this is not a bolt on. Jim I was writing abour bars that are 1" diameter over the total length and not 1.25". I think the 1" should fit without any changes (except brake hose length). Greg   Logged     The administrator has disabled public write access. #100350 Jimtec (User) Fresh Boarder Posts: 17 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   vpower wrote: Jimtec wrote: WARNING: These bars will not fit your risers! They neck down from 1.25" to 1" at the controls and risers, the problem is that Harley risers are spaced at 3.5" center to center and Yamaha is spaced at 4", the neck down will be inside your riser. Yamaha risers can be machined to accomidate the bars but this is not a bolt on. Jim I was writing abour bars that are 1" diameter over the total length and not 1.25". I think the 1" should fit without any changes (except brake hose length). Greg Yes Greg, That is correct, the 1" bars will work with no problem but they are not called "Burly", this name refers to the 1.25" bars from this supplier. Jim   Logged       The administrator has disabled public write access. #100797 vpower (User) Fresh Boarder Posts: 12 Re:Burly Brand Beach Retro Bar question 4 Months, 3 Weeks ago   Ok. Thanks for the explanation. Greg.   Logged     Last Edit: 2008/08/07 06:37 By vpower.   The administrator has disabled public write access.

Forum List Technical Corner Body/Frame

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->