Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum Technical Corner Body/Frame
Re:shock (1 viewing) (1) Guest
Go to bottom Post Reply Favoured: 0
TOPIC: Re:shock
#224088
Greeny (User)
Expert Boarder
Posts: 499
graphgraph
User Offline Click here to see the profile of this user
Re:shock 2 Years, 5 Months ago  
Look under the bike at the shock. There's 2 large nuts on the front end of the shock. The outer one is a jam nut. Loosen the jam nut. Then tighted the nut underneath it. I don't have the specs in front of me, but I'm thinking you can turn it in like an inch or so to stiffen up the shock. Tighten down the jam nut and you're good to go. Someone hopefully can chime in and tell you exactly how far to tighten the inner nut, but I'd start at an inch and see how that feels.

Hope that helps....greeny
 
Logged Logged  
  The administrator has disabled public write access.
      Topics Author Date
    thread link
shock
on the level 2009/09/03 12:47
    thread link
thread linkthread link Re:shock
slothy 2009/09/03 12:50
    thread link
thread linkthread linkthread link Re:shock
on the level 2009/09/08 21:59
    thread link
thread linkthread linkthread linkthread link Re:shock
Greeny 2009/09/08 22:10
    thread link
thread linkthread link Re:shock
slothy 2009/09/08 22:45
    thread link
thread linkthread linkthread link Re:shock
on the level 2009/09/12 19:33
    thread link
thread linkthread link Re:shock
raveon59 2009/09/13 07:14
    thread link
thread linkthread link Re:shock
Erbman02 2009/09/13 08:25
    thread link
thread linkthread link Re:shock
parttime 2009/09/13 19:37
    thread link
thread linkthread link Re:shock
Rayjay 2009/09/13 21:43
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Bike Talk, 2/11/2012
Subject: This tachometer?
dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ...
This tachometer?
new topic by:
dingodango88
In: Maintenance, 2/10/2012, 19 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...
Latest reply, 2/11/2012
greenpus: It's a pita but worth the upgradeIgnition switch and battery ????
20 posts, last by:
greenpus
In: Electrical/Electronics, 2/11/2012, 2 replies
Subject: Extending wires for inside the bars...
goodnamesaretook: Anyone out there have any idea how much length should need to be added to the stock wiring to be able to run the wires inside a set of 16" apes with stock risers. I've got the bars on order and would ...
Latest reply, 2/11/2012
1700cc: I believe I added about a foot but it's been awhile. I know I added more than I needed because I have ...Extending wires for inside the bars...
3 posts, last by:
1700cc
In: Maintenance, 2/11/2012, 5 replies
Subject: What should I do?
azbto: Ok, a little long but need to lay the ground work. Picked up an '05 1700 Midnight from a small dealership a couple months ago, only has 1500 miles on her. Well first thing I noticed was the tires were ...
Latest reply, 2/11/2012
davej: If the needle has slots on it then it has been changed. The pilot would not be a 150 it would be a 50. ...What should I do?
6 posts, last by:
davej
In: Non Motorcycle Topics, 2/11/2012, 2 replies
Subject: Lets go flying
saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152
Latest reply, 2/11/2012
Questcap: Took me longer than that... on my Road Star!:laugh: Darned windshield is like pushing a barn door!!!:PLets go flying
3 posts, last by:
Questcap
In: Non Motorcycle Topics, 2/11/2012, 1 reply
Subject: New family member
greyphart: Names Reggie. 4 1/2 year old Golden ...
Latest reply, 2/11/2012
dingodango88: Man that's awesome! Nothing better than a shelter dog. Sorry, I love dogs just as much as I love motorcycles ...New family member
2 posts, last by:
dingodango88
In: Bike Talk, 2/10/2012, 9 replies
Subject: Waht Tires do you ride???
ear3:
Latest reply, 2/11/2012
MikelJay: Metzler ME880's front and rear Like ROADGRABBER said, made a world of difference in the handling of ...Waht Tires do you ride???
10 posts, last by:
MikelJay
In: Maintenance, 2/10/2012, 8 replies
Subject: Throtle return rate
espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ...
Latest reply, 2/11/2012
Jmac: I had the same result as JEastonjr. Loosened up the adjusters just a little bit at the carb and problem ...Throtle return rate
9 posts, last by:
Jmac
In: Miscellaneous, 2/10/2012, 3 replies
Subject: selling my 07 cast wheels...help
ajbonner: want to make money for a fairing. both have tires, only front good (oem bridgestone). 7k miles. rear doesn't have rotor. how much should i expect to get for them? Anyone in the market?
Latest reply, 2/11/2012
stanag: I too am in search of wheels. send a photo and lets talk price Stanselling my 07 cast wheels...help
4 posts, last by:
stanag
In: Non Motorcycle Topics, 2/11/2012
Subject: Growing old, kicking and screaming
mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ...
Growing old, kicking and screaming
new topic by:
mbk
In: Maintenance, 2/10/2012, 10 replies
Subject: Lithium Soap?
About_Time: A lot of the lubrication points shown in the service manual call for the application of lithium soap type lubricant. Specifically, I am about to repack my steering neck bearings. What do the members ...
Latest reply, 2/11/2012
Erbman02: Lithium soap? I used it one time, but could never get that greasy feeling off my body no matter how ...Lithium Soap?
11 posts, last by:
Erbman02
In: Bolt Ons, 2/10/2012, 3 replies
Subject: Floorboard Extensions
Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob
Latest reply, 2/11/2012
Roadstar_Rob: Thanks Chris. No need for pics after taking a look at the mount I see what you did. That's a good idea ...Floorboard Extensions
4 posts, last by:
Roadstar_Rob
In: Electrical/Electronics, 2/10/2012, 5 replies
Subject: Led turn signals
fetasigma: I have an led taillight and was thinking of putting in led turn signals as well. Wich is better putting in load resistors or just changing out the flasher relay for one that is led compatible. Also is ...
Latest reply, 2/11/2012
texasscott1: They should unless someone has changed something. You can test the self cancel function by turning ...Led turn signals
6 posts, last by:
texasscott1
In: Bike Talk, 2/10/2012, 7 replies
Subject: Fairing and tour trunk ideas
Paintertom40: The wife gave me the go ahead to get fairing and tour trunk.so let me no what you have and how you like it. thanks Tom
Latest reply, 2/11/2012
davej: I went with the HD fairing with no regrets. Like was already said you can install tunes and gauges and ...Fairing and tour trunk ideas
8 posts, last by:
davej
In: Electrical/Electronics, 2/1/2012, 11 replies
Subject: starter problems
Papa Bear: with a new battery installed, i get all lights and electronics functioning when I push the starter button, but only a click. No starter rotation at all. Prognosis please? Papa Bear
Latest reply, 2/11/2012
rphazen: Now, with what you've saved on fixing it your self you are entitled to spend that on CHROME!!! :woohoo:starter problems
12 posts, last by:
rphazen
In: Bolt Ons, 2/10/2012, 7 replies
Subject: Removing passing lights
azbto: 1700 midnight star with yamaha passing lamps, i want to clean up the front a bit and am contemplating removing the passing light bar but see the front of the headlight is supported by the bar. Does anybody ...
Latest reply, 2/11/2012
signal20k9: +1 on trading. I've got my original turn signal bar with the turn signals. Maybe we can work out a deal ...Removing passing lights
8 posts, last by:
signal20k9
In: Miscellaneous, 2/10/2012, 7 replies
Subject: Custom back patch...
Unab8d_Ly4m: Was wondering if anyone knew where I could get a back patch done for a decent price. I would like to get my signature picture without the LSU or Saints logos, but with the colors reversed.
Latest reply, 2/11/2012
Billmel: Try this place, I just ordered 50 custom patches and they were half what everyone else was. There sample ...Custom back patch...
8 posts, last by:
Billmel
In: Bike Talk, 2/11/2012, 1 reply
Subject: LEVITRA No Script Fedex
Zebramola: Mail Order Without Prescription ...
Latest reply, 2/11/2012
roadiemort: :ohmy: :ohmy: :ohmy: :ohmy: :ohmy: :ohmy: :ohmy: :ohmy: :ohmy: spammer, modsLEVITRA No Script Fedex
2 posts, last by:
roadiemort
In: Bike Talk, 2/4/2012, 56 replies
Subject: Is RoadStar S too Big For Me? Female Rider Asking
azalearider: Hi, New to the site and this is my first thread. Looking for some advice. I'm a female rider - about 130 pounds and 5'5". My first purchase was 400cc bike - which I rode for 7 years. Then moved on ...
Latest reply, 2/11/2012
HEAVY METAL NOISE 101: :welcome:I just bought a 03' 1600 in oct. and my wife and I love it.If you know any body who has one ...Is RoadStar S too Big For Me? Female Rider Asking
57 posts, last by:
HEAVY METAL NOISE 101
In: Bike Talk, 2/11/2012
Subject: Greate Website
NorThai: Have a look... :)
Greate Website
new topic by:
NorThai
In: Bike Talk, 2/10/2012, 22 replies
Subject: this road star is to cool!!!
smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow
Latest reply, 2/10/2012
Keeb: So........is that supposed to be a nitrous bottle for a shifter linkage? Very different, Idunno that ...this road star is to cool!!!
23 posts, last by:
Keeb
In: Miscellaneous, 2/9/2012, 6 replies
Subject: Metric Magic
Plumbwader: Anyone have a good email addy for metric magic. I keep getting mailer daemons. Im trying to get a price on some stainless cables for my new apes? B) ill take suggestions about other places to contact ...
Latest reply, 2/10/2012
deadweight: Yes sir, Tim is fast and has good prices too.:)Metric Magic
7 posts, last by:
deadweight
In: Bolt Ons, 2/9/2012, 8 replies
Subject: Front wheel ring
signal20k9: Anybody have one of these laying around that they dont need? This one is from a Stratoliner, but looks like one from a V-Star 1100 will work as well by checking some part numbers.
Latest reply, 2/10/2012
signal20k9: Eddie there is a Write up on the Raider rear wheel swap on the board here. Looks like it was pretty extensive, ...Front wheel ring
9 posts, last by:
signal20k9
In: Introductions, 2/9/2012, 30 replies
Subject: Hello from Virginia (NOVA)
Azul Diablo: Im new to the Road Star Clinic but not new to riding. Ive been living on 2 wheels since 2005. My first bike was a Honda VTX 1300C it was a very good bike until I test rode a 2005 Yamaha Road Star Midnight ...
Latest reply, 2/10/2012
JGR: :welcome: from MI. and thanks for your :tank: This sit is awesome!Hello from Virginia (NOVA)
31 posts, last by:
JGR
In: Bike Talk, 2/10/2012, 14 replies
Subject: front springs
Cody: Well i ordered the progessive.springs for the front . So i figured id get started on makeing the spacers. Can anyone tell me what size they need to be thickness amd how long thanks guys
Latest reply, 2/10/2012
JGR: www.midnight-lightning.com/FrontLowering.html This is what i did and it was basically free and my bike ...front springs
15 posts, last by:
JGR
In: Non Motorcycle Topics, 2/10/2012, 4 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...
Latest reply, 2/10/2012
OBMF: Nice boots. I'm almost afraid to admit it, but I wear a pair of Harley Davidson boots that I bought for ...Got my new boots!
5 posts, last by:
OBMF
In: Introductions, 2/10/2012, 28 replies
Subject: hello all
DON1989: I bought me a 2008 road star silverado 1700 on new years day road it home about 18 miles when it was about 35 outside and still loved it!!! also pretty excited about finding this site
Latest reply, 2/10/2012
Paintertom40: hello from Ohio hello all
29 posts, last by:
Paintertom40
In: Body/Frame, 2/8/2012, 18 replies
Subject: shifter mod
dvblair: Has anyone cut off the heel portion of the shifter? I never use it and would like to have the extra room. I would like to remove it but it looks like you would need a spacer on the shaft and I'm not sure ...
Latest reply, 2/10/2012
Tug: Yup I did the same thing. It was my first mod actuallyshifter mod
19 posts, last by:
Tug
In: Miscellaneous, 2/10/2012, 2 replies
Subject: Intake Manifold
SaltyJack: :( I've been having thoughts of having a intake manifold modified and I saw one on ebay for $35, used. I enlarged the picture and it looked severely cracked to me so I asked "the" question. Why put something ...
Latest reply, 2/10/2012
MS1700: I have one of Curts and of about 5, it was the only one that did not leak and worked like a charm. Practice ...Intake Manifold
3 posts, last by:
MS1700
In: Bolt Ons, 2/9/2012, 7 replies
Subject: WTB Royal Star Hard Saddlebag mounting brackets
ajbonner: Let me know if you have the above. Dont want the trim brackets, just the mounting brackets. Thanks
Latest reply, 2/10/2012
ajbonner: thanks scottoWTB Royal Star Hard Saddlebag mounting brackets
8 posts, last by:
ajbonner




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.