To PVRIDER:these are the same pics I used to mount my bags.
"Except" I dont know he made it work without spacing it away
from the Fender as I did.On the ride side I made a similar
bracket at the front to mount to.And the lower"muffler stays"
as Yamaha calls them has to be bent staight as it curves down
in the front.Also the reason I had to spacer mine out from the
fender is I used the upper yamaha mount for the bags so I could
use the bag gaurds.On the left side I was able to secure the
front mount to my RH Doolie bracket.The pic`s in the above post
were the best I found for this project with only slight modifications
for my install.