TampaSVT wrote:
HD controls on the R* are a pain and increase the size of the project by at least 2X. Some have done it already (better men than I)... R* controls are the easiest way to go.
I will second that one...haha...BUT, if you follow the wiring guide that StoneCold has on the REV, it was pretty straight forward. he did his with a 2000, and mine is a 2007, and I think there was only one wire that was off. I plan to do the wiring diagram for mine when I get the module installed in a couple days.

Have a relay ready, you will need one for the starter button if you do HD controls.

The risers..........yeah, I didn't think of this until it was time for them...and I had to modify them greatly. I hacked off 1/4" of each side to fit the HD spacing on the bars. Now, if you are good with metal work, you can make this look OEM. Also, had to drill some holes in the bottom for the internal wiring.

Order the poly bushings now, so you have them. You WILL want them. I need to order them today, as my bars bounce around in the stock rubber bushing.

That is about all I can think of right now...Mine isn't the height setup you are looking for but...here is a pic

http://i161.photobucket.com/albums/t212/jcoleman19/Bike/IMG_0274.jpg