Re:Floor board spacers? - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Bolt Ons

Re:Floor board spacers?

Favoured: 0

Page:
<< Start < Prev 1 2 Next > End >>

TOPIC: Re:Floor board spacers?

Forum Tools

#491908

rphazen (User)

Gold Boarder

Posts: 896

Re:Floor board spacers? 1 Year, 1 Month ago
Also sig pic....forgot about that one. I'm not a fan of making the boards stick out farther. I already run out of lean angle way too soon.

Logged

Roadstar Pics ...................... Fairing Install

The administrator has disabled public write access.

#491909

Rev. (User)

Gold Boarder

Posts: 935

Re:Floor board spacers? 1 Year, 1 Month ago
rphazen wrote: Irishman wrote: Got a pic? who me? got a good comparison pic in my previous post of the vstar and Roadstar pedal pads. here's one with the vstar brake pedal pad on the bike. compare this pic to Rev's photo in previous post with stock brake pad. Think I am going for that myself thank you Mr. rphazen!

Logged

http://www.patriotguard.org/
http://myroadstar.webs.com/

The administrator has disabled public write access.

#491988

Goliath616 (User)

Fresh Boarder

Posts: 88

Re:Floor board spacers? 1 Year, 1 Month ago
I agree with the right floorboard problem being the brake pedal...that's why I'm going to buy one of the extended brake lever from Pacific coast star http://www.pacificcoaststar.com/pcs/road_star_extensions.htm I have no way to work metal...can't weld and have no shop to work on the bike...so I just save for what I need lol

Logged

The administrator has disabled public write access.

#492009

tatinguy (User)

S.R.B.S.I. proud member

Senior Boarder

Posts: 329

Re:Floor board spacers? 1 Year, 1 Month ago
making a bracket to slide the peddle out is pretty easy just need a drill n bit and some flat stock also kury has these out http://www.kuryakyn.com/Products/929/Adjustable-Cruise-Peg-Mounts have em on mine I love em

Logged

The administrator has disabled public write access.

#492040

Irishman (User)

Senior Boarder

Posts: 230

Re:Floor board spacers? 1 Year, 1 Month ago

Roadstar_Rob wrote:
Hey Irishman- for different reasons (I added Hypercharger that got in the way of my right leg) I added a spacer to extend the floorboard out... Someone on the RSC here posted doing it and I basically copied there instructions but used a 1.5" tubing for my spacer... cut about a 3" section of 1.5 inch square metal tubing and used as a spacer between floorboard and frame....worked perfect... do a search for floorboard spacing and that thread should come up...

Rob
Sorry I didn't hit the quote button!

Logged

GUN CONTROL

The administrator has disabled public write access.

Page:
<< Start < Prev 1 2 Next > End >>

Forum List

Technical Corner

Bolt Ons

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Maintenance, 6/18/2013, 10 replies Subject: Clutch shift hit hard brianis: Do you guys notice if your stars shift hard I can definitely feel every shift. Thought maybe oil but its good checked free play in the clutch it's good Latest reply, 6/18/2013 blue_star: It's a good idea to grease the pivot for the brake pedal too. ;)Clutch shift hit hard 11 posts, last by: blue_star In: Bike Talk, 6/18/2013, 13 replies Subject: Down it goes! Darn: Dropped the bike today :blush: :oops: I was at work, it started to rain so I decided to pull it into the shop. As I pulled in on to the clean painted floor with wet tires.... Traction was not available, ... Latest reply, 6/18/2013 Deerkiller: Hey, no worries. An F-350 Superduty broadsided me a week and a half ago and I let mine tip over too:laugh: ...Down it goes! 14 posts, last by: Deerkiller In: Bolt Ons, 6/18/2013, 21 replies Subject: What do the Cobra 2-1 pipes sound like? Deerkiller: So, thinking about rebuilding my Roadstar into a bit of a stripped down hotrod. I need to replace the pipes, as they were damaged pretty badly. I understand that a 2-1 system is going to give the best ... Latest reply, 6/18/2013 Deerkiller: I just took this video about 30 minutes ago of my Cobra 2 into 1 exhaust. Thanks, Shane, sounds ...What do the Cobra 2-1 pipes sound like? 22 posts, last by: Deerkiller In: Bolt Ons, 6/18/2013, 14 replies Subject: Are all forward controls so expensive? Deerkiller: Looking at forward controls for the bike also. Pricey bastards, aren't they:blink: Am I missing something? $550-$600 is the cheapest I found anything for. Seems a little steep. I understand you get ... Latest reply, 6/18/2013 Deerkiller: Stinger, sent you a PM:)Are all forward controls so expensive? 15 posts, last by: Deerkiller In: Bike Talk, 6/18/2013, 3 replies Subject: stage 1 exhaust sappermech: Well I was hesitant about doing the stage 1 mod but it actually sounds pretty good those cups or cones were a pain in the butt to get out finally after testing my patience ( don't take much) I pulled out ... Latest reply, 6/18/2013 Ricohoc: stage 1 exhaust 4 posts, last by: Ricohoc In: Bike Talk, 6/18/2013, 5 replies Subject: Changed Main jet and now worse mpg Cheekster: It had 205 main jet and I put a 172.5 in and now I get worse mpg. I have K&N BAK, V&H Longshots, stock manifold and I used to get 33 and now I'm only getting 105 miles before my light comes on. Stock ... Latest reply, 6/18/2013 SMOKINJOE: do you know if you have a stock needle or a after market needle. the stock needle will only have one ...Changed Main jet and now worse mpg 6 posts, last by: SMOKINJOE In: Non Motorcycle Topics, 6/17/2013, 27 replies Subject: Immigration Reform BuffaloRider: http://www.wvgazette.com/Opinion/OpEdCommentaries/201306140130 If this bill passes it will be the final knife in the back of this Republic. Low skilled workers will be fighting each other for scraps ... Latest reply, 6/18/2013 zmans1969: Too many candy azzes here. Too many employers getting rich and too many politicians looking for votes. They ...Immigration Reform 28 posts, last by: zmans1969 In: Bike Talk, 6/18/2013, 19 replies Subject: Here We Go - Pipes Install MartyN8677: Removed AIS and added BAK this afternoon. Getting ready to eat and then tackling the pipes install. My Cobra Speedster Slashcuts just arrived about a half hour ago. Somehow I think these will be more ... Latest reply, 6/18/2013 MartyN8677: No, they are not slip ons.Here We Go - Pipes Install 20 posts, last by: MartyN8677 In: Bike Talk, 6/18/2013, 6 replies Subject: exhaust back pressure SMOKINJOE: i have 3" hard chrome exhaust pipes. they are louder then i would like them to be. i installed the dish strainer but did not cut the center half inch section out. the bike is much quieter now and runs ... Latest reply, 6/18/2013 SMOKINJOE: thanks guys ,,,,just didn't want to do any engine damage and not know it till it was too late. exhaust back pressure 7 posts, last by: SMOKINJOE In: Miscellaneous, 6/17/2013, 15 replies Subject: Instrument cluster's blinding reflections Callred: Chrome, love it or hate it, we have it. I like the shiny parts of my bike with the exception of my instrument cluster cover. That pretty piece on top of the tank looks great until riding in the summer ... Latest reply, 6/18/2013 rballew: I'm not going to change the colors, re spraying it the same colors.. I just have a quiet a few ...Instrument cluster's blinding reflections 16 posts, last by: rballew In: Bike Talk, 6/18/2013, 7 replies Subject: Stopped by the Yamaha Shop at lunch Stevie: I needed some chain lube for my Raptor Noticed they got a 2012 HD Street Glide on the floor I almost filled out a credit app but I couldn't decide in the little time I had left at lunch Maybe after ... Latest reply, 6/18/2013 Stevie: The bike or the car? LMFAO I see a new car in her future :laugh: :laugh: :laugh: The ...Stopped by the Yamaha Shop at lunch 8 posts, last by: Stevie In: Bike Talk, 1/13/2013, 6 replies Subject: Mounting Royal STar Venture bags with 4 " Duals Kaidallac: This is especially for Silverfox since he asked me... hope you see this bro. First and formost most of this info I got from other members on the RSC...:) Parts you should have to mount your Royal ... Latest reply, 6/18/2013 SMOKINJOE: kia how much difference is their between the mutazu rs bags that you had and the royal hard bags? will ...Mounting Royal STar Venture bags with 4 " Duals 7 posts, last by: SMOKINJOE In: Technical Discussions, 6/17/2013, 5 replies Subject: Fender Support bwgoette: I am looking at putting a hitch and custom mounting a Harley Tour Pack on for the wife to be more comfortable. I am wondering if anyone has added this much weight to the rear end of the bike and if you ... Latest reply, 6/18/2013 bwgoette: thanks for all the advice. I will be adding support to mine and will upload pictures of the completed ...Fender Support 6 posts, last by: bwgoette In: Jetting, 6/9/2013, 26 replies Subject: Any thoughts other than cleaning? DusterP94: I'm on my first R* as of March. It has always had a some hesitation and popping at about 1/8 to 1/4 throttle. I believe the PO let it set with untreated fuel all winter. So I pulled, disassembled, and ... Latest reply, 6/18/2013 DusterP94: Thank you so much to greyphart SKWEARpeg jd750ace blue_star You guys have been quite a help. I've ...Any thoughts other than cleaning? 27 posts, last by: DusterP94 In: Introductions, 6/18/2013, 9 replies Subject: Hi from New Zealand canyonlanz: Hi there, Just a quick first note from a big Roady fan in Auckland. Well i fell for the classic Roady 3 years ago and had been enjoying reading this forum for most of that time. Still do. This time last ... Latest reply, 6/18/2013 Firedog: :welcome: from Southeast TexasHi from New Zealand 10 posts, last by: Firedog In: Body/Frame, 6/18/2013, 1 reply Subject: Progressive shock/spring advice needed RussB: I bougt my 06 R* with a progressice shock and spring already on it. I wish to adjust it tighter so it can handle more weight without sagging. I see it takes a spanner wrench but can't find one to fit.... Does ... Latest reply, 6/18/2013 blue_star: You can get it from Progressive. Part # SW-784 Progressive shock/spring advice needed 2 posts, last by: blue_star In: Miscellaneous, 6/18/2013, 1 reply Subject: What to do on quarters? Rest and R* =) Papaskispartan: I hate being on quarters, because my Warden will be over me, making sure I rest. I will have to sneak in the garage when she is not looking. On my trip back from ME I took (7-9 June) I came back with ... Latest reply, 6/18/2013 Greysnake: Soak it up and sleep:laugh: :laugh:What to do on quarters? Rest and R* =) 2 posts, last by: Greysnake In: Technical Discussions, 6/10/2013, 57 replies Subject: Pulling The Heads willy6501: After battling SVS for a few weeks now and coming to the realization that this bike won't run on anything but Ring Free I'm going to pull the heads and ream the guides. Does anyone have any hints or words ... Latest reply, 6/18/2013 Curt: Could have been an under size reamer the Yamaha builders were using.:)Pulling The Heads 58 posts, last by: Curt In: Pics of My Ride, 6/18/2013, 23 replies Subject: My first roadstar AWDimprezaL: About 3 minutes after picking it up. What is the official name for this color combo? Anyone know where I could get some touchup paint? The second ... Latest reply, 6/18/2013 Gram: Looks like my 2001 did. I think they called that color combo Crimson Red/ Root Beer Brown.My first roadstar 24 posts, last by: Gram In: Miscellaneous, 6/17/2013, 24 replies Subject: a little rider beware story.... takehikes: I am on a chopper forum and below is part of one guys post about his accident. The most important part is his take on footwear and "crash" bars....basically he is a guys with multi decades riding all kinds ... Latest reply, 6/18/2013 Blackroadie: I guess it can go either way... I bet it takes a helluva hit to fold the bar, but it happens. Also in ...a little rider beware story.... 25 posts, last by: Blackroadie In: Bike Talk, 6/18/2013, 13 replies Subject: Oops, wrong forum Erbman02: Sitting at dealer now, getting front Tire and Rivco risers installed. Way too hot to be doing risers myself. 9am it was in the upper 90's with humidity levels. Next will be to have seat modded. ... Latest reply, 6/18/2013 Meitemark: That was a good one:laugh: :laugh:Oops, wrong forum 14 posts, last by: Meitemark In: Rides, Meets, Events, 6/13/2013, 3 replies Subject: DelMarVa 4 July Ride?? Papaskispartan: Hey DelMarVa folks, Anyone interested in a 4th of July Ride? Doesnt have to be on the 4th, but I will be off that whole week, and thought about getting together with some of you guys (Claymiester, RoadStarBlue). ... Latest reply, 6/18/2013 Papaskispartan: Sounds good. I have Rob' number, and I think I have yours from a PM. I am up for anything. I havent been ...DelMarVa 4 July Ride?? 4 posts, last by: Papaskispartan In: Maintenance, 6/18/2013, 6 replies Subject: exhaust for 06 roadstar highway: what exhaust came on the road star in 06 ? when I bought mine it had cobra on it. And a K N air filter on it wonder if it needs jetted. Latest reply, 6/18/2013 Greysnake: I humbly learned all about mine from the people here and reading everything I could get my hands on;) ...exhaust for 06 roadstar 7 posts, last by: Greysnake In: Miscellaneous, 6/13/2013, 21 replies Subject: Great Deal on items on eBay pastornj: http://www.ebay.com/itm/190855565021?item=190855565021&viewitem=&vxp=mtr I'm selling my used BAK - K&N - air filter on eBay - a great deal for an XV1600 if anyone's looking - only $100 shipped. Other ... Latest reply, 6/18/2013 pastornj: Handlebars & lowering kit reduced to sell - make me an offer I can't refuse! Bump Great Deal on items on eBay 22 posts, last by: pastornj In: Vendors and Dealers, 6/10/2013, 11 replies Subject: RSC Mechanic's Shirts - Final Day to Order Warden: (Ok, not really burning it, but I won't be offering them again). Based ... Latest reply, 6/18/2013 Stephini3: I wanted to order another one! Just kidding! I love the shirt. :)RSC Mechanic's Shirts - Final Day to Order 12 posts, last by: Stephini3 In: Technical Discussions, 6/17/2013, 47 replies Subject: Are stock Road stars slow? mongovb: I have a 2001 Road Star and am the slowest in the bunch which include a 900 Vulcan and 1100 V-star. I know my bike is no dragster but dam, they all out accelerate me. My bike has about 30k on the top end ... Latest reply, 6/18/2013 BTM. Samson: Bump.....Yep aaaa "BIG BOY " :P B)Are stock Road stars slow? 48 posts, last by: BTM. Samson In: Maintenance, 6/18/2013, 6 replies Subject: Brake Fluid Shelf Life. GGattorr: Does brake fluid go bad if never opened. I have some DOT 3 Brake fluid that has never been opened. A couple of bottles probably 7 years old and a couple of bottles maybe about 4 years old. Friends gave ... Latest reply, 6/18/2013 Ricohoc: Look, it really makes a huge difference if you bleed with a Mity-Vac and from the caliper end. And, ...Brake Fluid Shelf Life. 7 posts, last by: Ricohoc In: Bike Talk, 6/18/2013, 2 replies Subject: Tips Erbman02: I'm very fortunate that I have a decent dealer that I can go to. Now don't get me wrong, there have been a couple times that they messed up, but were very quick to rectify the situation, even 1 time sending ... Latest reply, 6/18/2013 Stevie: ^ This my dealer doesn't have an air filter for the Road Star :angry:Tips 3 posts, last by: Stevie In: Electrical/Electronics, 6/18/2013, 5 replies Subject: Tune Talk RSTAR99: I was wondering what stereo's and speakers you all with HD fairings are using? I'm at that point finally and now I want a system that sounds good, I can listen to the radio as well as CD or other device ... Latest reply, 6/18/2013 Erbman02: used the db521 on the end and where they had the speedo and tach used 4 inch. I just did a search on ...Tune Talk 6 posts, last by: Erbman02 In: Bike Talk, 6/18/2013, 5 replies Subject: Online parts suppliers coolalexrex: So I have deduced that my oil gear needs to be replaced. I figure while I'm in there I may as well put in the Barnett clutch kit. The first few I've looked at don't include the clutch cover gasket! ... Latest reply, 6/18/2013 greenpus: I bought a gasket on ebay brand new for $11. Free shipping :P I bought the high rev oil gear on ebay, ...Online parts suppliers 6 posts, last by: greenpus

New Forum Posts

In: Maintenance, 6/18/2013, 10 replies
Subject: Clutch shift hit hard
brianis: Do you guys notice if your stars shift hard I can definitely feel every shift. Thought maybe oil but its good checked free play in the clutch it's good

Latest reply, 6/18/2013
blue_star: It's a good idea to grease the pivot for the brake pedal too. ;)Clutch shift hit hard

11 posts, last by:

blue_star

In: Bike Talk, 6/18/2013, 13 replies
Subject: Down it goes!
Darn: Dropped the bike today :blush: :oops: I was at work, it started to rain so I decided to pull it into the shop. As I pulled in on to the clean painted floor with wet tires.... Traction was not available, ...

Latest reply, 6/18/2013
Deerkiller: Hey, no worries. An F-350 Superduty broadsided me a week and a half ago and I let mine tip over too:laugh: ...Down it goes!

14 posts, last by:

Deerkiller

In: Bolt Ons, 6/18/2013, 21 replies
Subject: What do the Cobra 2-1 pipes sound like?
Deerkiller: So, thinking about rebuilding my Roadstar into a bit of a stripped down hotrod. I need to replace the pipes, as they were damaged pretty badly. I understand that a 2-1 system is going to give the best ...

Latest reply, 6/18/2013
Deerkiller: I just took this video about 30 minutes ago of my Cobra 2 into 1 exhaust. Thanks, Shane, sounds ...What do the Cobra 2-1 pipes sound like?

22 posts, last by:

Deerkiller

In: Bolt Ons, 6/18/2013, 14 replies
Subject: Are all forward controls so expensive?
Deerkiller: Looking at forward controls for the bike also. Pricey bastards, aren't they:blink: Am I missing something? $550-$600 is the cheapest I found anything for. Seems a little steep. I understand you get ...

Latest reply, 6/18/2013
Deerkiller: Stinger, sent you a PM:)Are all forward controls so expensive?

15 posts, last by:

Deerkiller

In: Bike Talk, 6/18/2013, 3 replies
Subject: stage 1 exhaust
sappermech: Well I was hesitant about doing the stage 1 mod but it actually sounds pretty good those cups or cones were a pain in the butt to get out finally after testing my patience ( don't take much) I pulled out ...

Latest reply, 6/18/2013
Ricohoc: stage 1 exhaust

4 posts, last by:

Ricohoc

In: Bike Talk, 6/18/2013, 5 replies
Subject: Changed Main jet and now worse mpg
Cheekster: It had 205 main jet and I put a 172.5 in and now I get worse mpg. I have K&N BAK, V&H Longshots, stock manifold and I used to get 33 and now I'm only getting 105 miles before my light comes on. Stock ...

Latest reply, 6/18/2013
SMOKINJOE: do you know if you have a stock needle or a after market needle. the stock needle will only have one ...Changed Main jet and now worse mpg

6 posts, last by:

SMOKINJOE

In: Non Motorcycle Topics, 6/17/2013, 27 replies
Subject: Immigration Reform
BuffaloRider: http://www.wvgazette.com/Opinion/OpEdCommentaries/201306140130 If this bill passes it will be the final knife in the back of this Republic. Low skilled workers will be fighting each other for scraps ...

Latest reply, 6/18/2013
zmans1969: Too many candy azzes here. Too many employers getting rich and too many politicians looking for votes. They ...Immigration Reform

28 posts, last by:

zmans1969

In: Bike Talk, 6/18/2013, 19 replies
Subject: Here We Go - Pipes Install
MartyN8677: Removed AIS and added BAK this afternoon. Getting ready to eat and then tackling the pipes install. My Cobra Speedster Slashcuts just arrived about a half hour ago. Somehow I think these will be more ...

Latest reply, 6/18/2013
MartyN8677: No, they are not slip ons.Here We Go - Pipes Install

20 posts, last by:

MartyN8677

In: Bike Talk, 6/18/2013, 6 replies
Subject: exhaust back pressure
SMOKINJOE: i have 3" hard chrome exhaust pipes. they are louder then i would like them to be. i installed the dish strainer but did not cut the center half inch section out. the bike is much quieter now and runs ...

Latest reply, 6/18/2013
SMOKINJOE: thanks guys ,,,,just didn't want to do any engine damage and not know it till it was too late. exhaust back pressure

7 posts, last by:

SMOKINJOE

In: Miscellaneous, 6/17/2013, 15 replies
Subject: Instrument cluster's blinding reflections
Callred: Chrome, love it or hate it, we have it. I like the shiny parts of my bike with the exception of my instrument cluster cover. That pretty piece on top of the tank looks great until riding in the summer ...

Latest reply, 6/18/2013
rballew: I'm not going to change the colors, re spraying it the same colors.. I just have a quiet a few ...Instrument cluster's blinding reflections

16 posts, last by:

rballew

In: Bike Talk, 6/18/2013, 7 replies
Subject: Stopped by the Yamaha Shop at lunch
Stevie: I needed some chain lube for my Raptor Noticed they got a 2012 HD Street Glide on the floor I almost filled out a credit app but I couldn't decide in the little time I had left at lunch Maybe after ...

Latest reply, 6/18/2013
Stevie: The bike or the car? LMFAO I see a new car in her future :laugh: :laugh: :laugh: The ...Stopped by the Yamaha Shop at lunch

8 posts, last by:

Stevie

In: Bike Talk, 1/13/2013, 6 replies
Subject: Mounting Royal STar Venture bags with 4 " Duals
Kaidallac: This is especially for Silverfox since he asked me... hope you see this bro. First and formost most of this info I got from other members on the RSC...:) Parts you should have to mount your Royal ...

Latest reply, 6/18/2013
SMOKINJOE: kia how much difference is their between the mutazu rs bags that you had and the royal hard bags? will ...Mounting Royal STar Venture bags with 4 " Duals

7 posts, last by:

SMOKINJOE

In: Technical Discussions, 6/17/2013, 5 replies
Subject: Fender Support
bwgoette: I am looking at putting a hitch and custom mounting a Harley Tour Pack on for the wife to be more comfortable. I am wondering if anyone has added this much weight to the rear end of the bike and if you ...

Latest reply, 6/18/2013
bwgoette: thanks for all the advice. I will be adding support to mine and will upload pictures of the completed ...Fender Support

6 posts, last by:

bwgoette

In: Jetting, 6/9/2013, 26 replies
Subject: Any thoughts other than cleaning?
DusterP94: I'm on my first R* as of March. It has always had a some hesitation and popping at about 1/8 to 1/4 throttle. I believe the PO let it set with untreated fuel all winter. So I pulled, disassembled, and ...

Latest reply, 6/18/2013
DusterP94: Thank you so much to greyphart SKWEARpeg jd750ace blue_star You guys have been quite a help. I've ...Any thoughts other than cleaning?

27 posts, last by:

DusterP94

In: Introductions, 6/18/2013, 9 replies
Subject: Hi from New Zealand
canyonlanz: Hi there, Just a quick first note from a big Roady fan in Auckland. Well i fell for the classic Roady 3 years ago and had been enjoying reading this forum for most of that time. Still do. This time last ...

Latest reply, 6/18/2013
Firedog: :welcome: from Southeast TexasHi from New Zealand

10 posts, last by:

Firedog

In: Body/Frame, 6/18/2013, 1 reply
Subject: Progressive shock/spring advice needed
RussB: I bougt my 06 R* with a progressice shock and spring already on it. I wish to adjust it tighter so it can handle more weight without sagging. I see it takes a spanner wrench but can't find one to fit.... Does ...

Latest reply, 6/18/2013
blue_star: You can get it from Progressive. Part # SW-784 Progressive shock/spring advice needed

2 posts, last by:

blue_star

In: Miscellaneous, 6/18/2013, 1 reply
Subject: What to do on quarters? Rest and R* =)
Papaskispartan: I hate being on quarters, because my Warden will be over me, making sure I rest. I will have to sneak in the garage when she is not looking. On my trip back from ME I took (7-9 June) I came back with ...

Latest reply, 6/18/2013
Greysnake: Soak it up and sleep:laugh: :laugh:What to do on quarters? Rest and R* =)

2 posts, last by:

Greysnake

In: Technical Discussions, 6/10/2013, 57 replies
Subject: Pulling The Heads
willy6501: After battling SVS for a few weeks now and coming to the realization that this bike won't run on anything but Ring Free I'm going to pull the heads and ream the guides. Does anyone have any hints or words ...

Latest reply, 6/18/2013
Curt: Could have been an under size reamer the Yamaha builders were using.:)Pulling The Heads

58 posts, last by:

Curt

In: Pics of My Ride, 6/18/2013, 23 replies
Subject: My first roadstar
AWDimprezaL: About 3 minutes after picking it up. What is the official name for this color combo? Anyone know where I could get some touchup paint? The second ...

Latest reply, 6/18/2013
Gram: Looks like my 2001 did. I think they called that color combo Crimson Red/ Root Beer Brown.My first roadstar

24 posts, last by:

Gram

In: Miscellaneous, 6/17/2013, 24 replies
Subject: a little rider beware story....
takehikes: I am on a chopper forum and below is part of one guys post about his accident. The most important part is his take on footwear and "crash" bars....basically he is a guys with multi decades riding all kinds ...

Latest reply, 6/18/2013
Blackroadie: I guess it can go either way... I bet it takes a helluva hit to fold the bar, but it happens. Also in ...a little rider beware story....

25 posts, last by:

Blackroadie

In: Bike Talk, 6/18/2013, 13 replies
Subject: Oops, wrong forum
Erbman02: Sitting at dealer now, getting front Tire and Rivco risers installed. Way too hot to be doing risers myself. 9am it was in the upper 90's with humidity levels. Next will be to have seat modded. ...

Latest reply, 6/18/2013
Meitemark: That was a good one:laugh: :laugh:Oops, wrong forum

14 posts, last by:

Meitemark

In: Rides, Meets, Events, 6/13/2013, 3 replies
Subject: DelMarVa 4 July Ride??
Papaskispartan: Hey DelMarVa folks, Anyone interested in a 4th of July Ride? Doesnt have to be on the 4th, but I will be off that whole week, and thought about getting together with some of you guys (Claymiester, RoadStarBlue). ...

Latest reply, 6/18/2013
Papaskispartan: Sounds good. I have Rob' number, and I think I have yours from a PM. I am up for anything. I havent been ...DelMarVa 4 July Ride??

4 posts, last by:

Papaskispartan

In: Maintenance, 6/18/2013, 6 replies
Subject: exhaust for 06 roadstar
highway: what exhaust came on the road star in 06 ? when I bought mine it had cobra on it. And a K N air filter on it wonder if it needs jetted.

Latest reply, 6/18/2013
Greysnake: I humbly learned all about mine from the people here and reading everything I could get my hands on;) ...exhaust for 06 roadstar

7 posts, last by:

Greysnake

In: Miscellaneous, 6/13/2013, 21 replies
Subject: Great Deal on items on eBay
pastornj: http://www.ebay.com/itm/190855565021?item=190855565021&viewitem=&vxp=mtr I'm selling my used BAK - K&N - air filter on eBay - a great deal for an XV1600 if anyone's looking - only $100 shipped. Other ...

Latest reply, 6/18/2013
pastornj: Handlebars & lowering kit reduced to sell - make me an offer I can't refuse! Bump Great Deal on items on eBay

22 posts, last by:

pastornj

In: Vendors and Dealers, 6/10/2013, 11 replies
Subject: RSC Mechanic's Shirts - Final Day to Order
Warden: (Ok, not really burning it, but I won't be offering them again). Based ...

Latest reply, 6/18/2013
Stephini3: I wanted to order another one! Just kidding! I love the shirt. :)RSC Mechanic's Shirts - Final Day to Order

12 posts, last by:

Stephini3

In: Technical Discussions, 6/17/2013, 47 replies
Subject: Are stock Road stars slow?
mongovb: I have a 2001 Road Star and am the slowest in the bunch which include a 900 Vulcan and 1100 V-star. I know my bike is no dragster but dam, they all out accelerate me. My bike has about 30k on the top end ...

Latest reply, 6/18/2013
BTM. Samson: Bump.....Yep aaaa "BIG BOY " :P B)Are stock Road stars slow?

48 posts, last by:

BTM. Samson

In: Maintenance, 6/18/2013, 6 replies
Subject: Brake Fluid Shelf Life.
GGattorr: Does brake fluid go bad if never opened. I have some DOT 3 Brake fluid that has never been opened. A couple of bottles probably 7 years old and a couple of bottles maybe about 4 years old. Friends gave ...

Latest reply, 6/18/2013
Ricohoc: Look, it really makes a huge difference if you bleed with a Mity-Vac and from the caliper end. And, ...Brake Fluid Shelf Life.

7 posts, last by:

Ricohoc

In: Bike Talk, 6/18/2013, 2 replies
Subject: Tips
Erbman02: I'm very fortunate that I have a decent dealer that I can go to. Now don't get me wrong, there have been a couple times that they messed up, but were very quick to rectify the situation, even 1 time sending ...

Latest reply, 6/18/2013
Stevie: ^ This my dealer doesn't have an air filter for the Road Star :angry:Tips

3 posts, last by:

Stevie

In: Electrical/Electronics, 6/18/2013, 5 replies
Subject: Tune Talk
RSTAR99: I was wondering what stereo's and speakers you all with HD fairings are using? I'm at that point finally and now I want a system that sounds good, I can listen to the radio as well as CD or other device ...

Latest reply, 6/18/2013
Erbman02: used the db521 on the end and where they had the speedo and tach used 4 inch. I just did a search on ...Tune Talk

6 posts, last by:

Erbman02

In: Bike Talk, 6/18/2013, 5 replies
Subject: Online parts suppliers
coolalexrex: So I have deduced that my oil gear needs to be replaced. I figure while I'm in there I may as well put in the Barnett clutch kit. The first few I've looked at don't include the clutch cover gasket! ...

Latest reply, 6/18/2013
greenpus: I bought a gasket on ebay brand new for $11. Free shipping :P I bought the high rev oil gear on ebay, ...Online parts suppliers

6 posts, last by:

greenpus

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.