Road Star Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

Page: << Start < Prev 1 2 3 4 5 Next > End >>

TOPIC: Re:Flag mounts for 6 Forum Tools Post New Topic Show latest posts Rules

#495973 Planet42 (User) Junior Boarder Posts: 116 Flag mounts for 6"x9" 12 Months ago   I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?   Logged       The administrator has disabled public write access. #495988 Darn (User) Don't forget, Never forget. Platinum Boarder Posts: 8089 Re:Flag mounts for 6"x9" 12 Months ago   Your best off to fabricate your own. A 6X9 flag will put a lot of drag on when you get up over 20mph so you will have to make sure it's well supported. I run 3 smaller flags full time on the back of my bike (not shown in signature picture) but for PGR missions I have a large platform that Ironman built for my hidden hitch and I've mounted 3 more flags to it, one is on an eight foot pole with a 6x9 flag the other two are 3x5 and I use 2 boat flag poles bondo'ed into the wood base on the plateform. The large flag is supported with a brace coming off of the luggage rack, and I filled the inside with 2" dowel rod.   Logged       The administrator has disabled public write access. #495989 greyphart (User) Platinum Boarder Posts: 5796 Re:Flag mounts for 6"x9" 12 Months ago   Made my own one time from a 1/8" x 1" x 9" bar and 2 pieces 1/4" x 6" square tube stock welded perpendicular to the bar at the ends with holes drilled at the lower plate mounts. Used steel rods about 18" long for poles and welded washers about 6 1/2" from the top to keep it up. Then threaded the top and put a crown nut and washer on. Remember to always put the US flag on the right side as flag etiquette decrees it be at a higher point (when the bike is on the kickstand) when shown with any other flag. GP   Logged     The administrator has disabled public write access. #495992 Planet42 (User) Junior Boarder Posts: 116 Re:Flag mounts for 6 12 Months ago   Darn wrote: Your best off to fabricate your own. A 6X9 flag will put a lot of drag on when you get up over 20mph so you will have to make sure it's well supported. I run 3 smaller flags full time on the back of my bike (not shown in signature picture) but for PGR missions I have a large platform that Ironman built for my hidden hitch and I've mounted 3 more flags to it, one is on an eight foot pole with a 6x9 flag the other two are 3x5 and I use 2 boat flag poles bondo'ed into the wood base on the plateform. The large flag is supported with a brace coming off of the luggage rack, and I filled the inside with 2" dowel rod. I'm looking for how you mount the smaller flags (6 x 9 inch flags) - I am looking for a mount that I can use full time - not ready to ride with large flags yet. How are the small flags mounted?   Logged       The administrator has disabled public write access. #495993 Planet42 (User) Junior Boarder Posts: 116 Re:Flag mounts for 6 12 Months ago   greyphart wrote: Made my own one time from a 1/8" x 1" x 9" bar and 2 pieces 1/4" x 6" square tube stock welded perpendicular to the bar at the ends with holes drilled at the lower plate mounts. Used steel rods about 18" long for poles and welded washers about 6 1/2" from the top to keep it up. Then threaded the top and put a crown nut and washer on. Remember to always put the US flag on the right side as flag etiquette decrees it be at a higher point (when the bike is on the kickstand) when shown with any other flag. GP Thanks for the info and the tip. I wouldn't have thought about the kickstand.   Logged       The administrator has disabled public write access. #495994 greyphart (User) Platinum Boarder Posts: 5796 Re:Flag mounts for 6 12 Months ago   Don't have any decent pics of what I did but maybe this will give you some idea. Click on it to get a little better view. GP   Logged     Last Edit: 2012/05/26 18:11 By greyphart. Reason: add comment   The administrator has disabled public write access. #495995 Rev. (User) Gold Boarder Posts: 935 Re:Flag mounts for 6 12 Months ago   Darn wrote: Your best off to fabricate your own. A 6X9 flag will put a lot of drag on when you get up over 20mph so you will have to make sure it's well supported. I run 3 smaller flags full time on the back of my bike (not shown in signature picture) but for PGR missions I have a large platform that Ironman built for my hidden hitch and I've mounted 3 more flags to it, one is on an eight foot pole with a 6x9 flag the other two are 3x5 and I use 2 boat flag poles bondo'ed into the wood base on the plateform. The large flag is supported with a brace coming off of the luggage rack, and I filled the inside with 2" dowel rod. I think Planet42 meant 6inches x 9inches not 6ft x9ft   Logged     http://www.patriotguard.org/ http://myroadstar.webs.com/   The administrator has disabled public write access. #495996 Rev. (User) Gold Boarder Posts: 935 Re:Flag mounts for 6 12 Months ago   I am going to fab mine up next week for my 6"x9" flags also for PGR going to mount then off the license plate bracket.   Logged     http://www.patriotguard.org/ http://myroadstar.webs.com/   The administrator has disabled public write access. #496005 Planet42 (User) Junior Boarder Posts: 116 Re:Flag mounts for 6 12 Months ago   greyphart wrote: Don't have any decent pics of what I did but maybe this will give you some idea. Click on it to get a little better view. GP Thanks GP - I don't weld, but this does give me some ideas.   Logged       The administrator has disabled public write access. #496007 Planet42 (User) Junior Boarder Posts: 116 Re:Flag mounts for 6 12 Months ago   Rev. wrote: I am going to fab mine up next week for my 6"x9" flags also for PGR going to mount then off the license plate bracket. Rev. - are you planning on something quickly removable, or more permanent. I'd be interested to see what you come up with.   Logged       The administrator has disabled public write access.

Page: << Start < Prev 1 2 3 4 5 Next > End >>

Forum List Technical Corner Bolt Ons

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->