Road Star Clinic Forum	ForumThreaded ViewRules

Welcome, Guest Please Login or Register.    Lost Password?

Favoured: 0

Page: << Start < Prev 1 2 3 4 5 Next > End >>

TOPIC: Need more or faster speed from my 01 Roadstar ? Forum Tools Post New Topic Show latest posts Rules

#100525 DocShadow (Admin) Hmmmm .... send beer Admin Posts: 10794 Re:Need more or faster speed from my 01 Roadstar 4 Months, 2 Weeks ago   If you're not expecting FZ performance ..... ..... looking at your sig pic, with the aftermarket pipes and aircleaner your bike should be able to whip your head back when you take off ...... it may be set up incorrectly or maybe something is wrong. Doc   Logged     My Bike Website   The administrator has disabled public write access. #102390 stumpman (User) Fresh Boarder Posts: 74 Re:Need more or faster speed from my 01 Roadstar 4 Months, 1 Week ago   Just got my Dyna 3000 in today planning on starting the instal tonight should have her done tomorrow sometime.   Logged       The administrator has disabled public write access. #102447 RSCstar1602 (User) Junior Boarder Posts: 136 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   also.... If your looking at top end I suggest doing a search on here and reading about the needle and seat in the stock carb. Some have had fuel starvation at top end and replaced the stock needle and seat with a Suzuki part no. also by doing this some have eliminated the fuel pump and gone to gravity feed, also vented the gas cap, ect. Lots of good info here, do you have any dry lakes nearby, you could build the worlds fastest Yamaha.   Logged       The administrator has disabled public write access. #102454 Razor (User) Senior Boarder Posts: 219 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   My advise is to strap a rocket to it!   Logged       The administrator has disabled public write access. #102605 Roadhammer (User) Fresh Boarder Posts: 50 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   Im not sure what blowing the bank is for u but if u look up Patrick Racing they have q whole bunch of kits and stuff....They have built some of the fastest metric bikes out there and they have plenty of things that would work for your star...   Logged     The administrator has disabled public write access. #102608 stumpman (User) Fresh Boarder Posts: 74 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   Don't want or need a rocket just need my cruiser to run a little faster and not hit the rev limiter when running with my buds on there cruisers......I believe I just cured the problem. I just got done installing my new Dyna 3000 it was easy and only took about 40 or so minutes to do. I set it at 5000 rpm's and 34A set the degrees to 3 and from what I read it wont matter where they are set as it's on the A setting so I should be good to go. Thanks for the info from those who reccomended the Dyna! I can't take her for a spin yet as it's raining here now but am planning a trip to bike night tomorrow and should give her a whirl then.   Logged       The administrator has disabled public write access. #102609 stumpman (User) Fresh Boarder Posts: 74 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   RSCstar1602 wrote: also.... If your looking at top end I suggest doing a search on here and reading about the needle and seat in the stock carb. Some have had fuel starvation at top end and replaced the stock needle and seat with a Suzuki part no. also by doing this some have eliminated the fuel pump and gone to gravity feed, also vented the gas cap, ect. Lots of good info here, do you have any dry lakes nearby, you could build the worlds fastest Yamaha. Thanks for the info!   Logged       The administrator has disabled public write access. #102722 n5ifi (User) Junior Boarder Posts: 115 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   So...... What were your results? Are you able to get into the 5000 rpm rev limiter with the stock sprocket? If not I would suggest the 31 tooth sprocket as well. The 1600's should have come stock with the 31t Pulley. For rotund guys like myself it's a must have item and if ridden conservatively(65 and under) will actually pick up mpg. So, how does it run?   Logged     The administrator has disabled public write access. #102728 Big Bear (Moderator) All things in moderation! Moderator Posts: 4733 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   1600 R* came with a 33 tooth sprocket , 1700's a 32. 31 is a step up for sure , esp for a 1600. BB   Logged       The administrator has disabled public write access. #102751 stumpman (User) Fresh Boarder Posts: 74 Re:Need more or faster speed from my 01 Roadstar ? 4 Months, 1 Week ago   n5ifi wrote: So...... What were your results? Are you able to get into the 5000 rpm rev limiter with the stock sprocket? If not I would suggest the 31 tooth sprocket as well. The 1600's should have come stock with the 31t Pulley. For rotund guys like myself it's a must have item and if ridden conservatively(65 and under) will actually pick up mpg. So, how does it run?Took it out this evening for a short ride it had a good bit more pickup speed and never hit the rev limiter still 104 top end but I can live with that ok. Just wondering if I shopuld try the 36A setting or leave it at the 34A setting. I will give it a good test tomorrow evening.   Logged       The administrator has disabled public write access.

Page: << Start < Prev 1 2 3 4 5 Next > End >>

Forum List General Bike Talk

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->