Ok here goes......tail light is from the Yamaha Bolt. License plate frame has led turns and run/stop built in to it.
New headlight is Bates style with some mounts I found that fork mount. However I had to adapt it to the spread we have.
Put LED amber turns up front that encircle the fork tubes just above the fork boots. they are a strip that attaches via 3M tape.
Bobbed the rear fender, dumped the sissy bar.
Painted tank and fender 2014 Yamaha Bolt matte silver metallic. GT350 stripe is black metallic matte. Side covers black metallic matte only.
Shot 2K clear over it all, also matte finish. Also I did this all with rattle can.
I buried a modified Yamaha tuning fork symbol in to the clear on the tank. Symbol doesn't have the little ring around it. I wanted to mess with people and see if they knew what it was.
I had some Battistini oval hole pegs that were black with the holes machined bar aluminum. Shot them the black metallic matte.
A few other things of course but there you have it.
I'll post a few pictures but they have to be in separate posts. Our photo thing is remains stupid. sorry.