Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum General Bike Talk
Re:Help with carb settings
Go to bottom Post Reply Favoured: 0
TOPIC: Re:Help with carb settings
#1938
aviator (Visitor)
Posts: 0
graphgraph
User Offline Click here to see the profile of this user
Birthdate:
Help with carb settings 7 Years, 2 Months ago  
Hello,
Just installed the Barons BAK yesterday. Removed the AIS tonight. The people at Barons told me to use the 172.5 main jet with my BAK and stock pipes drilled out to Stage 3. I set the pilot screw to 3 1/2 turns as suggested. Fired the bike up and seems to pop now. Any suggestions? Only got to ride about a mile at it is cold out. Thought I might wait to make any adjustments until I could ride more but wanted to see if anyone suggested anything different.

Thanks, aviator
 
Logged Logged  
  The administrator has disabled public write access.
#1942
DocShadow (Admin)
Hmmmm .... send beer
Admin
Posts: 17615
graph
User Online Now Click here to see the profile of this user
Gender: Male DocShadow's RoadStar Site Location: Ottawa, Ontario
Re:Help with carb settings 7 Years, 2 Months ago  
You'll find the setting varies depending on the ambient temp. I'd wait to fine-tune it until you have close to normal riding temp.

I have found that the recommended Baron setting is a bit too rich for my area for an aftermarket pipe and the BAK. I used a 170 set on the 4.5 on the clip.

3 1/2 turns is a bit too much as you're at the end of the usefulness of the PMS. Where do you have the clip on the needle?

From my experience, I'd recocmmend a 170 main with 4-5 on the clip.

Doc<br><br>Post edited by: DocShadow, at: 2005/03/24 12:12
 
Logged Logged  
 
My Bike Website
  The administrator has disabled public write access.
#1943
aviator (Visitor)
Posts: 0
graphgraph
User Offline Click here to see the profile of this user
Birthdate:
Re:Help with carb settings 7 Years, 2 Months ago  
Docshadow,
Thanks for the help. I have the clip on the #5 slot on the needle. Figured I needed to wait until the temp warms up a bit to get it right for my normal riding temps. Thanks, aviator
 
Logged Logged  
  The administrator has disabled public write access.
#2013
daglassguy (User)
Fresh Boarder
Posts: 82
graphgraph
User Offline Click here to see the profile of this user
Re:Help with carb settings 7 Years, 1 Month ago  
You didnt say whether or not you had removed AIS. You will get popping and backfire if you dont remove. I would go ahead and remove if you havnt already done so before I did the fine tuning.
 
Logged Logged  
  The administrator has disabled public write access.
#2014
daglassguy (User)
Fresh Boarder
Posts: 82
graphgraph
User Offline Click here to see the profile of this user
Re:Help with carb settings 7 Years, 1 Month ago  
Sorry just woke up and didnt recognize what I had just read.
 
Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Rides, Meets, Events, 5/14/2012, 79 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...
Latest reply, 5/27/2012
smokescreens: i'll bring some warmer cloths but im the crazy guy that will go outside in a pair of jeans a t-shirt ...WNC Meet and Greet
80 posts, last by:
smokescreens
In: Non Motorcycle Topics, 5/25/2012, 25 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/27/2012
DRABHorse: Fantastic...lol Had a good laugh over this one:laugh: :laugh:I'm Torn
26 posts, last by:
DRABHorse
In: Bolt Ons, 5/26/2012, 10 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...
Latest reply, 5/27/2012
alltimeqb: Dang it. I pulled the trigger too fast. Bought a pair of the black Kury'last night. I'll take some ...New Handlebars - Stock Grips?
11 posts, last by:
alltimeqb
In: Website General, 5/27/2012, 9 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...
Latest reply, 5/27/2012
Stevie: http://maps.google.com/maps/ms?ie=UTF&msa=0&msid= 215710362856812605977.0004c1053fccfa1b08f11 I'll ...Members by location.
10 posts, last by:
Stevie
In: Bike Talk, 5/26/2012, 20 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/27/2012
About_Time: VWH...thanks for posting this. I think I've seen it before, but it was one of those types of things ...Road trip tool kit
21 posts, last by:
About_Time
In: Bike Talk, 5/27/2012
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...
Interesting fact
new topic by:
River
In: Bolt Ons, 5/26/2012, 25 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/27/2012
greyphart: There are several good ideas on flag mounting here. Just a matter of taste and affordability, permanent ...Flag mounts for 6"x9"
26 posts, last by:
greyphart
In: Bike Talk, 5/27/2012, 2 replies
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...
Latest reply, 5/27/2012
Stevie: Loading up as we speak First stop... Santa Ysabel for some breakfastRoad Star Ride Tomorrow
3 posts, last by:
Stevie
In: Non Motorcycle Topics, 5/26/2012, 19 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)
Latest reply, 5/27/2012
SKWEARpeg: The freedoms and liberties we enjoy in this country, were bought and paid for with the sacrifices of ...Thank you, all who served.
20 posts, last by:
SKWEARpeg
In: Electrical/Electronics, 5/26/2012, 7 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...
Latest reply, 5/27/2012
old dog: Says it's fine in the ad? Maintains new and used batteries in As-New condition indefinately. ...Solar Pulse Battery Energy Power Charger?
8 posts, last by:
old dog
In: Technical Discussions, 5/26/2012, 14 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...
Latest reply, 5/27/2012
smokescreens: thanks for the advise guys. yea, i realize that i dont need the huge bag and i probly could do with the ...advice on tail bags for a road trip.
15 posts, last by:
smokescreens
In: Non Motorcycle Topics, 5/27/2012, 8 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:
Latest reply, 5/27/2012
Darn: I noticed the same thing a couple of weeks ago,,,, it was sort of nice to know who else was reading ...It's 3:00 am
9 posts, last by:
Darn
In: Bike Talk, 5/26/2012, 7 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/27/2012
BK177V: I dont think they are Cobra. They do look like the ones in the above picture. I wouldnt mind buying 2 ...Confused and a little frustrated.
8 posts, last by:
BK177V
In: Introductions, 5/26/2012, 21 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/27/2012
old dog: :welcome: From Niagara NY. billHello from the Region
22 posts, last by:
old dog
In: Rides, Meets, Events, 3/16/2012, 100 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/27/2012
Darn: All are welcome! Come on up. I've got a couple of "Guest rooms" if needed, just ask EMU and Mandy, it's ...Central M&G, 2012 June 29,30, and July 1
101 posts, last by:
Darn
In: Bike Talk, 5/21/2012, 42 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/27/2012
Darn: Dyna-beads are pretty easy to find, just google them. They are the best way to balance a tire, unless ...I have gone to the Darkside...
43 posts, last by:
Darn
In: Bike Talk, 5/8/2012, 38 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...
Latest reply, 5/27/2012
Ricohoc: My Project
39 posts, last by:
Ricohoc
In: Electrical/Electronics, 5/25/2012, 18 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...
Latest reply, 5/27/2012
Ricohoc: Rear tail/brake light lens
19 posts, last by:
Ricohoc
In: Technical Discussions, 5/26/2012, 2 replies
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...
Latest reply, 5/27/2012
zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go?
3 posts, last by:
zulu
In: Miscellaneous, 5/26/2012, 12 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...
Latest reply, 5/27/2012
HEAVY METAL: I didn't donate any parts but do you think that she could give me some moose head? and ...this clinic has shown its true greatness yet again
13 posts, last by:
HEAVY METAL
In: Electrical/Electronics, 5/26/2012, 13 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/27/2012
Mudslide: Some have said the self cancelling turn signal stops working when they installed a load equalizer. Mine ...So much for simple
14 posts, last by:
Mudslide
In: Tech Tips, 5/26/2012, 6 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...
Latest reply, 5/27/2012
Spydr: Helps to see it done at least once, right?Engine teardown video
7 posts, last by:
Spydr
In: Bolt Ons, 5/24/2012, 13 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James
Latest reply, 5/27/2012
Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables?
14 posts, last by:
Booster
In: Maintenance, 5/25/2012, 12 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...
Latest reply, 5/26/2012
Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how
13 posts, last by:
Greysnake
In: Miscellaneous, 5/26/2012, 11 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/26/2012
blue star: Time for a new mechanic.:angry:Let the summer begin...(not quite)
12 posts, last by:
blue star
In: Introductions, 5/24/2012, 35 replies
Subject: Hello from Kentucky
myxlr: nice to be here i ride a 2008 silverado
Latest reply, 5/26/2012
Edge51: from B.C. Hello from Kentucky
36 posts, last by:
Edge51
In: Miscellaneous, 4/19/2012, 8 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/26/2012
Edge51: +1 man.....boom..boom....bullshit!!!Hey Stevie...
9 posts, last by:
Edge51
In: Maintenance, 5/25/2012, 15 replies
Subject: Brake pads
slyguy: I'm looking to replace both front and rear brake pads. I hear EBC Double H Sintered are good. Can I get part numbers for both? TIA!
Latest reply, 5/26/2012
mkayx: they look every close to the galfer i did not think there is a diff between an 2000 and an 02Brake pads
16 posts, last by:
mkayx
In: Bike Talk, 5/26/2012, 14 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/26/2012
Edge51: Me too...I just compress it between my index finger and my thumb...:woohoo: :woohoo: or..well...actually....I ...Changing the shock spring
15 posts, last by:
Edge51
In: Miscellaneous, 5/24/2012, 41 replies
Subject: Opinion about studs
rich19007: I bought a 2003 Road Star Midnight Star 2 years ago. The bike has studded seats and saddlebags. I ride with all harley guys (I don't know if that makes a difference or not). Lately, I've been ribbed ...
Latest reply, 5/26/2012
ozarkpreacher: I looked at them and thought they looked cool but couldn't find anyone that had one to get any ...Opinion about studs
42 posts, last by:
ozarkpreacher




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.