Re:Questions on the choke, idle and carb - Road Star Forum

	Road Star Forum	Forum Flat View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Maintenance

Re:Questions on the choke, idle and carb (1 viewing) (1) Guest

Favoured: 0

TOPIC: Re:Questions on the choke, idle and carb

Forum Tools

#208716

SoCoRoadie (User)

Fresh Boarder

Posts: 26

Re:Questions on the choke, idle and carb 2 Years, 7 Months ago

Big Bear wrote:
They are garbage , as you have now discovered. I personally used a dremel with a cut wheel and cut across the screw so I could use a flat head screwdriver to remove the offending screws. A hacksaw blade would do in a pinch. Once those are out , it's all down hill.

BTW , removing the TPS completely (as you asked last night) is not the end of the world , but requires it be reset by making sure the resistance is right (Ohms) , So to avoid the headache , just leave the TPS on the carb.

BB

I got the screws off thanks to the Dremel!! Carb is off and I took out the jets and cleaned them as best I could. I'm heading out to Home Depot in a bit to look for the replacement screws. Hopefully I can get everything back together again.
By the way, I took off the vacum slide cover to clean in there. Was that wrong??

Logged

The administrator has disabled public write access.

Topics

Author

Date

Questions on the choke, idle and carb

SoCoRoadie

2009/06/27 20:30

Re:Questions on the choke, idle and carb

Greysnake

2009/06/27 20:45

Re:Questions on the choke, idle and carb

Big Bear

2009/06/27 20:53

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/06/28 02:02

Re:Questions on the choke, idle and carb

2005Roadstar

2009/06/28 07:40

Re:Questions on the choke, idle and carb

MrFurious

2009/06/28 08:30

Re:Questions on the choke, idle and carb

Erbman02

2009/06/28 09:06

Re:Questions on the choke, idle and carb

Chaplain Charlie

2009/06/28 17:23

Re:Questions on the choke, idle and carb

Big Bear

2009/06/28 17:30

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/06/28 21:47

Re:Questions on the choke, idle and carb

Big Bear

2009/06/28 21:57

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/06/29 01:06

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/02 23:09

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/02 23:19

Re:Questions on the choke, idle and carb

Big Bear

2009/07/03 06:24

Re:Questions on the choke, idle and carb

BigBoyinMS

2009/07/03 06:36

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/03 15:24

Re:Questions on the choke, idle and carb

BigBoyinMS

2009/07/03 15:38

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/03 18:24

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/04 00:00

Re:Questions on the choke, idle and carb

Roadkill1962

2009/07/04 00:05

Re:Questions on the choke, idle and carb

Gram

2009/06/28 23:24

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/11 17:38

Re:Questions on the choke, idle and carb

SoCoRoadie

2009/07/15 23:47

Forum List

Technical Corner

Maintenance

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Electrical/Electronics, 2/11/2012, 1 reply Subject: Volt Meter moreland4: I have the installed on my bike. Love the functionality but the lights are ... Latest reply, 2/11/2012 smokescreens: i dont see why it would hurt anythingVolt Meter 2 posts, last by: smokescreens In: Body/Frame, 1/31/2012, 5 replies Subject: Starting the rebuild... goodnamesaretook: Now that I have some parts on the way, i started the breakdown of the Roadie today for the bagger rebuild to start. Looking forward to posting pics and getting input from everyone here along the way. Progress ... Latest reply, 2/11/2012 goodnamesaretook: Just thought I'd give an update to anyone who would like to see... got the bags and rear fender ...Starting the rebuild... 6 posts, last by: goodnamesaretook In: Bike Talk, 2/5/2012, 15 replies Subject: WTB: Landon's Grab Bar major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ... Latest reply, 2/11/2012 moreland4: Hey, so do I. :woohoo:WTB: Landon's Grab Bar 16 posts, last by: moreland4 In: Non Motorcycle Topics, 2/11/2012, 1 reply Subject: Looking at a Mustang GT, any advice? xbeaus: it's a 96 GT. 5 speed. 4.6 SOHC. I test drove it and it's been well taken care of. I can pick it up for $3200.00. I've always wanted to get a mustang but don't know much about them. This one also has ... Latest reply, 2/11/2012 SMSgt: Sounds like what are you waiting for. I own 3 Mustangs and would buy more except I got married and she ...Looking at a Mustang GT, any advice? 2 posts, last by: SMSgt In: Bike Talk, 2/10/2012, 13 replies Subject: Waht Tires do you ride??? ear3: Latest reply, 2/11/2012 moreland4: Bikes in the shop getting new rubber put on right now. This will be my third set set of Metzlers ME ...Waht Tires do you ride??? 14 posts, last by: moreland4 In: Bike Talk, 2/11/2012, 4 replies Subject: Stage 3 problem B1gRed: So I'm working over a set of stock pipes for my 09 R* to make them stage 3. I made it all the way to the point where I wiggle the center tube until it comes out. Well it broke loose but it seems it somehow ... Latest reply, 2/11/2012 B1gRed: and the result. I think I will do stage 2 with big holes on the remaining pipe. Stage 3 problem 5 posts, last by: B1gRed In: Bike Talk, 2/11/2012 Subject: AIS Removal HotRodRStar: Hey all, I am generally lazy by nature and dont like doing any more work than absolutely necessary. So in the case of AIS removal I abhorred the idea of removing my exhaust just to beat on the pressed ... AIS Removal new topic by: HotRodRStar In: Body/Frame, 2/11/2012, 11 replies Subject: Stock heel/toe shifter….. ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ... Latest reply, 2/11/2012 moreland4: Like others have said, I didn't want to "think" how to shift on the fly. So my stock "04 toe/heel shifter ...Stock heel/toe shifter….. 12 posts, last by: moreland4 In: Bike Talk, 2/11/2012, 10 replies Subject: Solo Seats- Narrowing down the list, want opinions Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ... Latest reply, 2/11/2012 smhowse: I had mine custom made from www.billmayersaddles.com Lets just say I am well endowed in the rear section, ...Solo Seats- Narrowing down the list, want opinions 11 posts, last by: smhowse In: Bike Talk, 2/11/2012, 7 replies Subject: Finallt done...yah right!!!! Dragoon: prior to having my back surgery in January, i did all the mechanical work to my bike (coils, suspension, heads and valve, carburetor and upgraded stator). The bike runs like lightning. Then the day before ... Latest reply, 2/11/2012 moreland4: I'm overly partial to black bikes but I'm really diggin that paint. Looking real sharp.Finallt done...yah right!!!! 8 posts, last by: moreland4 In: Bike Talk, 2/11/2012, 2 replies Subject: four corners ride? 129drifter: anyone done the four corners ride on a Roadstar? What say ye? :) http://www.usa4corners.org/main.htm Latest reply, 2/11/2012 moreland4: That really looks like a blast! 21 days averaging 450-480 miles per day...whew! :ohmy: If I only ...four corners ride? 3 posts, last by: moreland4 In: Bike Talk, 2/11/2012, 2 replies Subject: Windshield Bag DarkStar74: I am wanting to get a decent priced 3 pocket studded windshield bag. Not sure on the fitment on the stock Silverado windhield. I was hoping you guys could help me out with suggestions and maybe even someone ... Latest reply, 2/11/2012 ozarkpreacher: I put this one on my bike when I had just the windshield. I used velcro 2.5 wide and went all the ...Windshield Bag 3 posts, last by: ozarkpreacher In: Non Motorcycle Topics, 2/11/2012, 7 replies Subject: Growing old, kicking and screaming mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ... Latest reply, 2/11/2012 Questcap: "Old age isn't for sissies," my mom always said. My uncle would say, "There's a lot of lead in them ...Growing old, kicking and screaming 8 posts, last by: Questcap In: Non Motorcycle Topics, 2/11/2012, 3 replies Subject: Thnx! Inubus: I bought my 07 2 years ago and decided to check out the web to see what I could find out about this bike. I found this place! Lucky me. Great advice in just about everything I could think of asking. I ... Latest reply, 2/11/2012 TampaSVT: +1, Inubus. ;) RichThnx! 4 posts, last by: TampaSVT In: Bike Talk, 2/11/2012, 5 replies Subject: Any problem using Harley bars? Doc_V: Was thinking about getting some new bars and was curious if Harley bars can be used on a Roadie? ...Assuming they're 1 in. in diameter of course. Latest reply, 2/11/2012 TampaSVT: People will keep trying to win you over with free hotdogs if you put HD bars on. But, I don't know ...Any problem using Harley bars? 6 posts, last by: TampaSVT In: Rides, Meets, Events, 2/11/2012, 3 replies Subject: Finally got to blow out the cobwebs today... Road Dog: ...that is, after all of this awesome rain that we've needed and working for 2 weeks without a weekend break, it was time for me and the wife to hop on the R* and ride. We rode out to Round Top, TX ... Latest reply, 2/11/2012 Don Dickinson: in the teens in minneapolis today, however, the weatherman says 40 or so by wed. fingers are crossed:)Finally got to blow out the cobwebs today... 4 posts, last by: Don Dickinson In: Non Motorcycle Topics, 2/11/2012, 4 replies Subject: Lets go flying saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152 Latest reply, 2/11/2012 samw: I know what you mean, I did some real ugly ones in a 172.:ohmy:Lets go flying 5 posts, last by: samw In: Bike Talk, 2/11/2012, 2 replies Subject: 2012 Road Star Silverado S donelam304: Has anyone seen the new Road Star Silverado S yet. We finally got one in at the shop i work part time at and put her together. The first thing i noticed and fell in love with was the entire front end. ... Latest reply, 2/11/2012 Tug: yeah them are pretty :woohoo: http://www.chromemasters.com/2012 Road Star Silverado S 3 posts, last by: Tug In: Pics of My Ride, 6/27/2011, 52 replies Subject: Posting Pics Step By Step!!! CPORetired: I know alot of people are having trouble with the posting of pics so since I am bored to death today I thought I would try to help. First the programs I use are all available online and do NOT cost anything. ... Latest reply, 2/11/2012 geester: Thanks CPO.Posting Pics Step By Step!!! 53 posts, last by: geester In: Bike Talk, 2/11/2012, 5 replies Subject: This tachometer? dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ... Latest reply, 2/11/2012 Curt: Nothing wrong with that one I can make a polished SS bracket to fit your stock risers that looks like ...This tachometer? 6 posts, last by: Curt In: Maintenance, 2/10/2012, 21 replies Subject: Ignition switch and battery ???? BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ... Latest reply, 2/11/2012 jd750ace: Mark7 wrote: Re:Ignition switch and battery ???? 1 Day, 12 Hours ago I just replaced my battery ...Ignition switch and battery ???? 22 posts, last by: jd750ace In: Bike Talk, 2/11/2012, 2 replies Subject: chrome wheel kryinggame: Guys, I'm kicking an idea around: chrome wheel. For you guys who went chrome, did you do both front and back wheels or solely the front wheel? I'm wondering if it would look horrible if I only went ... Latest reply, 2/11/2012 bigflip: When I did my 21" conversion, I did the front first, then did the rear a few months later. I couldn't ...chrome wheel 3 posts, last by: bigflip In: Introductions, 1/30/2012, 35 replies Subject: My First R* LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ... Latest reply, 2/11/2012 smokescreens: Man im glad i dont have a mod monkey hanging around:ohmy: that could make me broke:ohmy: :ohmy:My First R* 36 posts, last by: smokescreens In: Non Motorcycle Topics, 2/10/2012, 6 replies Subject: Got my new boots! chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ... Latest reply, 2/11/2012 xbeaus: Got my new boots! 7 posts, last by: xbeaus In: Pics of My Ride, 1/28/2012, 33 replies Subject: I'm back with a new toy!! Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ... Latest reply, 2/11/2012 Keeb: Hmmmmmm....guess its time for a new sig pic. The Purple Beast has moved on from my garage now, Guess ...I'm back with a new toy!! 34 posts, last by: Keeb In: Electrical/Electronics, 2/11/2012, 3 replies Subject: new key switch help 250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ... Latest reply, 2/11/2012 Erbman02: well, the other 2 wires are not connected for a reason at the key switch until the key is on. I'd check ...new key switch help 4 posts, last by: Erbman02 In: Bike Talk, 2/11/2012, 1 reply Subject: new apes coming tristate: just ordered new pc apes, after alot of looking found these guys, ROAD-6 customs. All good reveiws, all "good ol boys" doing the work... Latest reply, 2/11/2012 Chadmans06: Nice Tristae, they were my first choice, the only reason I didn't get them was because I scored some ...new apes coming 2 posts, last by: Chadmans06 In: Bike Talk, 2/11/2012, 1 reply Subject: Anyone familiar with this drivers backrest? Doc_V: Saw this on Amazon for $145. Anyone know anything about them? On ... Latest reply, 2/11/2012 pigpen: This is a great design for the Roadie. It's design is taken from the bak-up backrest design. this design ...Anyone familiar with this drivers backrest? 2 posts, last by: pigpen In: Non Motorcycle Topics, 2/11/2012, 3 replies Subject: New family member greyphart: Names Reggie. 4 1/2 year old Golden ... Latest reply, 2/11/2012 tarcon: I have a Doberman and an Irish Setter. the Irish Setter goes balistic when I just go to get on my bike. ...New family member 4 posts, last by: tarcon In: Bolt Ons, 2/11/2012, 1 reply Subject: Decals moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. (some Yamaha ones on the bottom of page ... Latest reply, 2/11/2012 Tug: Here are some more http://home.comcast.net/~tpbiker1/Motorcycle.html http://www.motorcycledecalgraphics.com/ http://www.jamesdeancreations.com/yamaha_decals.htmDecals 2 posts, last by: Tug

New Forum Posts

In: Electrical/Electronics, 2/11/2012, 1 reply
Subject: Volt Meter
moreland4: I have the installed on my bike. Love the functionality but the lights are ...

Latest reply, 2/11/2012
smokescreens: i dont see why it would hurt anythingVolt Meter

2 posts, last by:

smokescreens

In: Body/Frame, 1/31/2012, 5 replies
Subject: Starting the rebuild...
goodnamesaretook: Now that I have some parts on the way, i started the breakdown of the Roadie today for the bagger rebuild to start. Looking forward to posting pics and getting input from everyone here along the way. Progress ...

Latest reply, 2/11/2012
goodnamesaretook: Just thought I'd give an update to anyone who would like to see... got the bags and rear fender ...Starting the rebuild...

6 posts, last by:

goodnamesaretook

In: Bike Talk, 2/5/2012, 15 replies
Subject: WTB: Landon's Grab Bar
major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ...

Latest reply, 2/11/2012
moreland4: Hey, so do I. :woohoo:WTB: Landon's Grab Bar

16 posts, last by:

moreland4

In: Non Motorcycle Topics, 2/11/2012, 1 reply
Subject: Looking at a Mustang GT, any advice?
xbeaus: it's a 96 GT. 5 speed. 4.6 SOHC. I test drove it and it's been well taken care of. I can pick it up for $3200.00. I've always wanted to get a mustang but don't know much about them. This one also has ...

Latest reply, 2/11/2012
SMSgt: Sounds like what are you waiting for. I own 3 Mustangs and would buy more except I got married and she ...Looking at a Mustang GT, any advice?

2 posts, last by:

SMSgt

In: Bike Talk, 2/10/2012, 13 replies
Subject: Waht Tires do you ride???
ear3:

Latest reply, 2/11/2012
moreland4: Bikes in the shop getting new rubber put on right now. This will be my third set set of Metzlers ME ...Waht Tires do you ride???

14 posts, last by:

moreland4

In: Bike Talk, 2/11/2012, 4 replies
Subject: Stage 3 problem
B1gRed: So I'm working over a set of stock pipes for my 09 R* to make them stage 3. I made it all the way to the point where I wiggle the center tube until it comes out. Well it broke loose but it seems it somehow ...

Latest reply, 2/11/2012
B1gRed: and the result. I think I will do stage 2 with big holes on the remaining pipe. Stage 3 problem

5 posts, last by:

B1gRed

In: Bike Talk, 2/11/2012
Subject: AIS Removal
HotRodRStar: Hey all, I am generally lazy by nature and dont like doing any more work than absolutely necessary. So in the case of AIS removal I abhorred the idea of removing my exhaust just to beat on the pressed ...
AIS Removal

new topic by:

HotRodRStar

In: Body/Frame, 2/11/2012, 11 replies
Subject: Stock heel/toe shifter…..
ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ...

Latest reply, 2/11/2012
moreland4: Like others have said, I didn't want to "think" how to shift on the fly. So my stock "04 toe/heel shifter ...Stock heel/toe shifter…..

12 posts, last by:

moreland4

In: Bike Talk, 2/11/2012, 10 replies
Subject: Solo Seats- Narrowing down the list, want opinions
Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ...

Latest reply, 2/11/2012
smhowse: I had mine custom made from www.billmayersaddles.com Lets just say I am well endowed in the rear section, ...Solo Seats- Narrowing down the list, want opinions

11 posts, last by:

smhowse

In: Bike Talk, 2/11/2012, 7 replies
Subject: Finallt done...yah right!!!!
Dragoon: prior to having my back surgery in January, i did all the mechanical work to my bike (coils, suspension, heads and valve, carburetor and upgraded stator). The bike runs like lightning. Then the day before ...

Latest reply, 2/11/2012
moreland4: I'm overly partial to black bikes but I'm really diggin that paint. Looking real sharp.Finallt done...yah right!!!!

8 posts, last by:

moreland4

In: Bike Talk, 2/11/2012, 2 replies
Subject: four corners ride?
129drifter: anyone done the four corners ride on a Roadstar? What say ye? :) http://www.usa4corners.org/main.htm

Latest reply, 2/11/2012
moreland4: That really looks like a blast! 21 days averaging 450-480 miles per day...whew! :ohmy: If I only ...four corners ride?

3 posts, last by:

moreland4

In: Bike Talk, 2/11/2012, 2 replies
Subject: Windshield Bag
DarkStar74: I am wanting to get a decent priced 3 pocket studded windshield bag. Not sure on the fitment on the stock Silverado windhield. I was hoping you guys could help me out with suggestions and maybe even someone ...

Latest reply, 2/11/2012
ozarkpreacher: I put this one on my bike when I had just the windshield. I used velcro 2.5 wide and went all the ...Windshield Bag

3 posts, last by:

ozarkpreacher

In: Non Motorcycle Topics, 2/11/2012, 7 replies
Subject: Growing old, kicking and screaming
mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ...

Latest reply, 2/11/2012
Questcap: "Old age isn't for sissies," my mom always said. My uncle would say, "There's a lot of lead in them ...Growing old, kicking and screaming

8 posts, last by:

Questcap

In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: Thnx!
Inubus: I bought my 07 2 years ago and decided to check out the web to see what I could find out about this bike. I found this place! Lucky me. Great advice in just about everything I could think of asking. I ...

Latest reply, 2/11/2012
TampaSVT: +1, Inubus. ;) RichThnx!

4 posts, last by:

TampaSVT

In: Bike Talk, 2/11/2012, 5 replies
Subject: Any problem using Harley bars?
Doc_V: Was thinking about getting some new bars and was curious if Harley bars can be used on a Roadie? ...Assuming they're 1 in. in diameter of course.

Latest reply, 2/11/2012
TampaSVT: People will keep trying to win you over with free hotdogs if you put HD bars on. But, I don't know ...Any problem using Harley bars?

6 posts, last by:

TampaSVT

In: Rides, Meets, Events, 2/11/2012, 3 replies
Subject: Finally got to blow out the cobwebs today...
Road Dog: ...that is, after all of this awesome rain that we've needed and working for 2 weeks without a weekend break, it was time for me and the wife to hop on the R* and ride. We rode out to Round Top, TX ...

Latest reply, 2/11/2012
Don Dickinson: in the teens in minneapolis today, however, the weatherman says 40 or so by wed. fingers are crossed:)Finally got to blow out the cobwebs today...

4 posts, last by:

Don Dickinson

In: Non Motorcycle Topics, 2/11/2012, 4 replies
Subject: Lets go flying
saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152

Latest reply, 2/11/2012
samw: I know what you mean, I did some real ugly ones in a 172.:ohmy:Lets go flying

5 posts, last by:

samw

In: Bike Talk, 2/11/2012, 2 replies
Subject: 2012 Road Star Silverado S
donelam304: Has anyone seen the new Road Star Silverado S yet. We finally got one in at the shop i work part time at and put her together. The first thing i noticed and fell in love with was the entire front end. ...

Latest reply, 2/11/2012
Tug: yeah them are pretty :woohoo: http://www.chromemasters.com/2012 Road Star Silverado S

3 posts, last by:

Tug

In: Pics of My Ride, 6/27/2011, 52 replies
Subject: Posting Pics Step By Step!!!
CPORetired: I know alot of people are having trouble with the posting of pics so since I am bored to death today I thought I would try to help. First the programs I use are all available online and do NOT cost anything. ...

Latest reply, 2/11/2012
geester: Thanks CPO.Posting Pics Step By Step!!!

53 posts, last by:

geester

In: Bike Talk, 2/11/2012, 5 replies
Subject: This tachometer?
dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ...

Latest reply, 2/11/2012
Curt: Nothing wrong with that one I can make a polished SS bracket to fit your stock risers that looks like ...This tachometer?

6 posts, last by:

Curt

In: Maintenance, 2/10/2012, 21 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...

Latest reply, 2/11/2012
jd750ace: Mark7 wrote: Re:Ignition switch and battery ???? 1 Day, 12 Hours ago I just replaced my battery ...Ignition switch and battery ????

22 posts, last by:

jd750ace

In: Bike Talk, 2/11/2012, 2 replies
Subject: chrome wheel
kryinggame: Guys, I'm kicking an idea around: chrome wheel. For you guys who went chrome, did you do both front and back wheels or solely the front wheel? I'm wondering if it would look horrible if I only went ...

Latest reply, 2/11/2012
bigflip: When I did my 21" conversion, I did the front first, then did the rear a few months later. I couldn't ...chrome wheel

3 posts, last by:

bigflip

In: Introductions, 1/30/2012, 35 replies
Subject: My First R*
LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ...

Latest reply, 2/11/2012
smokescreens: Man im glad i dont have a mod monkey hanging around:ohmy: that could make me broke:ohmy: :ohmy:My First R*

36 posts, last by:

smokescreens

In: Non Motorcycle Topics, 2/10/2012, 6 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...

Latest reply, 2/11/2012
xbeaus: Got my new boots!

7 posts, last by:

xbeaus

In: Pics of My Ride, 1/28/2012, 33 replies
Subject: I'm back with a new toy!!
Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ...

Latest reply, 2/11/2012
Keeb: Hmmmmmm....guess its time for a new sig pic. The Purple Beast has moved on from my garage now, Guess ...I'm back with a new toy!!

34 posts, last by:

Keeb

In: Electrical/Electronics, 2/11/2012, 3 replies
Subject: new key switch help
250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ...

Latest reply, 2/11/2012
Erbman02: well, the other 2 wires are not connected for a reason at the key switch until the key is on. I'd check ...new key switch help

4 posts, last by:

Erbman02

In: Bike Talk, 2/11/2012, 1 reply
Subject: new apes coming
tristate: just ordered new pc apes, after alot of looking found these guys, ROAD-6 customs. All good reveiws, all "good ol boys" doing the work...

Latest reply, 2/11/2012
Chadmans06: Nice Tristae, they were my first choice, the only reason I didn't get them was because I scored some ...new apes coming

2 posts, last by:

Chadmans06

In: Bike Talk, 2/11/2012, 1 reply
Subject: Anyone familiar with this drivers backrest?
Doc_V: Saw this on Amazon for $145. Anyone know anything about them? On ...

Latest reply, 2/11/2012
pigpen: This is a great design for the Roadie. It's design is taken from the bak-up backrest design. this design ...Anyone familiar with this drivers backrest?

2 posts, last by:

pigpen

In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: New family member
greyphart: Names Reggie. 4 1/2 year old Golden ...

Latest reply, 2/11/2012
tarcon: I have a Doberman and an Irish Setter. the Irish Setter goes balistic when I just go to get on my bike. ...New family member

4 posts, last by:

tarcon

In: Bolt Ons, 2/11/2012, 1 reply
Subject: Decals
moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. (some Yamaha ones on the bottom of page ...

Latest reply, 2/11/2012
Tug: Here are some more http://home.comcast.net/~tpbiker1/Motorcycle.html http://www.motorcycledecalgraphics.com/ http://www.jamesdeancreations.com/yamaha_decals.htmDecals

2 posts, last by:

Tug

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.