Re:Almost, but not quite - Road Star Forum

	Road Star Forum	Forum Flat View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Electrical/Electronics

Re:Almost, but not quite

Favoured: 1

TOPIC: Re:Almost, but not quite

Forum Tools

#225984

vwtech0 (User)

Engineers Don't Know Jack!

Senior Boarder

Posts: 275

Re:Almost, but not quite 2 Years, 8 Months ago

If you connected wires with an empty beer can nearby, thats probably your problem right there. You should never have less than half a beer when hooking up a 12 volt circuit. Check at the bulbs and see which one your lacking ( positive or ground ). No sense back tracking until you get that one down. You might find power on both sides of one bulb and ground on both sides of another. That should at least tell you where to start. If you lack power or ground at any connection, then you have an open circuit. If you pulled wires through the bars, then pray you didn't pull one loose. Remember, no less than half a beer. Once it hits less than half. CHUG!

Logged

I lost my Slinky. Can I push you down the stairs?

The administrator has disabled public write access.

Topics

Author

Date

Almost, but not quite

boodie111

2009/09/17 21:35

Re:Almost, but not quite

vwtech0

2009/09/17 22:47

Re:Almost, but not quite

boodie111

2009/09/17 23:32

Re:Almost, but not quite

vwtech0

2009/09/17 23:34

Re:Almost, but not quite

boodie111

2009/09/17 23:42

Re:Almost, but not quite

boodie111

2009/09/18 21:16

Re:Almost, but not quite

vwtech0

2009/09/18 23:11

Re:Almost, but not quite

boodie111

2009/09/19 00:05

Re:Almost, but not quite

vwtech0

2009/09/19 07:26

Re:Almost, but not quite

Flashback

2009/09/19 08:28

Re:Almost, but not quite

Clifford

2009/09/19 10:31

Re:Almost, but not quite

vwtech0

2009/09/19 12:56

Re:Almost, but not quite

Clifford

2009/09/25 21:50

Re:Almost, but not quite

boodie111

2009/09/27 16:10

Re:Almost, but not quite

Clifford

2009/09/27 21:46

Re:Almost, but not quite

boodie111

2009/09/19 09:29

Re:Almost, but not quite

1700cc

2009/09/19 09:57

Re:Almost, but not quite

boodie111

2009/09/19 10:07

Re:Almost, but not quite

boodie111

2009/09/19 14:01

Re:Almost, but not quite

boodie111

2009/09/19 15:22

Re:Almost, but not quite

vwtech0

2009/09/19 17:09

Re:Almost, but not quite

vwtech0

2009/09/19 17:11

Re:Almost, but not quite

vwtech0

2009/09/19 18:06

Re:Almost, but not quite

boodie111

2009/09/19 18:25

Re:Almost, but not quite

vwtech0

2009/09/19 18:40

Re:Almost, but not quite

boodie111

2009/09/19 19:10

Re:Almost, but not quite

boodie111

2009/09/19 19:43

Re:Almost, but not quite

todddpain

2009/09/20 01:01

Re:Almost, but not quite

vwtech0

2009/09/20 11:29

Re:Almost, but not quite

boodie111

2009/09/20 21:53

Re:Almost, but not quite

boodie111

2009/09/20 22:07

Re:Almost, but not quite

vwtech0

2009/09/20 22:13

Re:Almost, but not quite

todddpain

2009/09/22 00:34

Re:Almost, but not quite

vwtech0

2009/09/22 07:28

Re:Almost, but not quite

boodie111

2009/09/21 11:02

Re:Almost, but not quite

DocShadow

2009/09/21 11:22

Re:Almost, but not quite

boodie111

2009/09/21 11:58

Re:Almost, but not quite

vwtech0

2009/09/21 18:00

Re:Almost, but not quite

boodie111

2009/09/21 22:32

Re:Almost, but not quite

boodie111

2009/09/22 09:06

Re:Almost, but not quite

Flashback

2009/09/22 09:19

Re:Almost, but not quite

boodie111

2009/09/22 09:40

Re:Almost, but not quite

Flashback

2009/09/22 09:53

Re:Almost, but not quite

boodie111

2009/09/22 12:15

Re:Almost, but not quite

boodie111

2009/09/24 22:25

Re:Almost, but not quite

vwtech0

2009/09/24 23:23

Re:Almost, but not quite

vwtech0

2009/09/24 23:27

Re:Almost, but not quite

boodie111

2009/09/25 09:51

Re:Almost, but not quite

vwtech0

2009/09/25 20:33

Re:Almost, but not quite

boodie111

2009/09/26 12:01

Re:Almost, but not quite

boodie111

2009/10/03 21:30

Re:Almost, but not quite

Clifford

2009/10/03 22:24

Re:Almost, but not quite

boodie111

2009/10/03 23:00

Forum List

Technical Corner

Electrical/Electronics

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts

In: Rides, Meets, Events, 5/27/2012
Subject: Seaside Bike Fest, 2nd week of July
River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out.
Seaside Bike Fest, 2nd week of July

new topic by:

River

In: Bike Talk, 5/27/2012, 2 replies
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...

Latest reply, 5/27/2012
River: I don't know Erbman, it registers 14.1 to 4.5 instead of 14.1 to 4.7 so I guess that would be a decimal. ...Interesting fact

3 posts, last by:

River

In: Bolt Ons, 5/26/2012, 18 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...

Latest reply, 5/27/2012
brown91redcam: Thanks for the pics,I have a pair like those that I have been thinking of using on mine but they seemed ...New Handlebars - Stock Grips?

19 posts, last by:

brown91redcam

In: Technical Discussions, 5/26/2012, 22 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...

Latest reply, 5/27/2012
LIGHTNIN: I have been useing the T-Bag Expandable for years and it is one tough customer. Did not want leather ...advice on tail bags for a road trip.

23 posts, last by:

LIGHTNIN

In: Electrical/Electronics, 5/26/2012, 18 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...

Latest reply, 5/27/2012
brown91redcam: I have seen the load equalizers at auto parts store near the bulbs,it is a inline resistor that simulates ...So much for simple

19 posts, last by:

brown91redcam

In: Bike Talk, 5/26/2012, 2 replies
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...

Latest reply, 5/27/2012
Inubus: Thank you very much! I can't find any markings for identification of the maker of the sidecar so I think ...Side Car mounting

3 posts, last by:

Inubus

In: Introductions, 5/27/2012, 7 replies
Subject: Hello from TN.
Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ...

Latest reply, 5/27/2012
DRABHorse: :welcome:You bought a great bike...and the people on this forum are fantastic Have fun and ride safe..From ...Hello from TN.

8 posts, last by:

DRABHorse

In: Miscellaneous, 5/26/2012, 12 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...

Latest reply, 5/27/2012
armybronco: I agree with Blue Star! At the very least the bill for ANY work should be cut by 1/2 if not 2/3!!!!:woohoo: ...Let the summer begin...(not quite)

13 posts, last by:

armybronco

In: Electrical/Electronics, 5/26/2012, 8 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...

Latest reply, 5/27/2012
Ricohoc: :laugh:Solar Pulse Battery Energy Power Charger?

9 posts, last by:

Ricohoc

In: Non Motorcycle Topics, 5/26/2012, 26 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)

Latest reply, 5/27/2012
armybronco: I am truly humbled by those that served our great country before me...if not for them I would not be ...Thank you, all who served.

27 posts, last by:

armybronco

In: Non Motorcycle Topics, 5/25/2012, 27 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...

Latest reply, 5/27/2012
Darn: I had a Cruisers Vee Express 30ft (not as new as the one your showing) but I loved it, hated to get rid ...I'm Torn

28 posts, last by:

Darn

In: Miscellaneous, 5/26/2012, 17 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...

Latest reply, 5/27/2012
Boatmark: I frequent a coupla other forums on the net and the RSC is the one I always find myself at the most. ...this clinic has shown its true greatness yet again

18 posts, last by:

Boatmark

In: Rides, Meets, Events, 5/14/2012, 81 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...

Latest reply, 5/27/2012
ironman: Hey Smoke, if your going, swing thru NE Ohio & we'll ride down together. Rememeber we're heading ...WNC Meet and Greet

82 posts, last by:

ironman

In: Website General, 5/27/2012, 12 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...

Latest reply, 5/27/2012
BC1955: I tried to get the little house to show up user name when I post but it does not. What do I need to ...Members by location.

13 posts, last by:

BC1955

In: Bike Talk, 5/26/2012, 15 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?

Latest reply, 5/27/2012
BC1955: No Stevie, I changed out the stock relay arm to the Baron's. I still have the stock dog bones but a ...Changing the shock spring

16 posts, last by:

BC1955

In: Miscellaneous, 4/19/2012, 9 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:

Latest reply, 5/27/2012
SKWEARpeg: We have a whole generation of people out there, who's entire life is comprised of their Smart phone, ...Hey Stevie...

10 posts, last by:

SKWEARpeg

In: Introductions, 5/26/2012, 22 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/27/2012
Edge51: From B.C. that's Canada...where's NWI??? lol Hello from the Region

23 posts, last by:

Edge51

In: Bolt Ons, 5/26/2012, 26 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?

Latest reply, 5/27/2012
Darn: I made mine with the American flag up high and the other two are over the saddle bags, I can also mount ...Flag mounts for 6"x9"

27 posts, last by:

Darn

In: Non Motorcycle Topics, 5/27/2012, 10 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:

Latest reply, 5/27/2012
Edge51: booIt's 3:00 am

11 posts, last by:

Edge51

In: Bike Talk, 5/26/2012, 20 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...

Latest reply, 5/27/2012
About_Time: VWH...thanks for posting this. I think I've seen it before, but it was one of those types of things ...Road trip tool kit

21 posts, last by:

About_Time

In: Bike Talk, 5/27/2012, 2 replies
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...

Latest reply, 5/27/2012
Stevie: Loading up as we speak First stop... Santa Ysabel for some breakfastRoad Star Ride Tomorrow

3 posts, last by:

Stevie

In: Bike Talk, 5/26/2012, 7 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...

Latest reply, 5/27/2012
BK177V: I dont think they are Cobra. They do look like the ones in the above picture. I wouldnt mind buying 2 ...Confused and a little frustrated.

8 posts, last by:

BK177V

In: Rides, Meets, Events, 3/16/2012, 100 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...

Latest reply, 5/27/2012
Darn: All are welcome! Come on up. I've got a couple of "Guest rooms" if needed, just ask EMU and Mandy, it's ...Central M&G, 2012 June 29,30, and July 1

101 posts, last by:

Darn

In: Bike Talk, 5/21/2012, 42 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...

Latest reply, 5/27/2012
Darn: Dyna-beads are pretty easy to find, just google them. They are the best way to balance a tire, unless ...I have gone to the Darkside...

43 posts, last by:

Darn

In: Bike Talk, 5/8/2012, 38 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...

Latest reply, 5/27/2012
Ricohoc: My Project

39 posts, last by:

Ricohoc

In: Electrical/Electronics, 5/25/2012, 18 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...

Latest reply, 5/27/2012
Ricohoc: Rear tail/brake light lens

19 posts, last by:

Ricohoc

In: Technical Discussions, 5/26/2012, 2 replies
Subject: where does the hoses go?
zulu: ok i know im getting old but seeing as i have had the bike in bits for the winter ,can some one kick me up the arse and tell me where the two hoses go from the back of the air box....xv1600 99-model,i ...

Latest reply, 5/27/2012
zulu: your a gentleman and a scolar ...many thanks old boy,where does the hoses go?

3 posts, last by:

zulu

In: Tech Tips, 5/26/2012, 6 replies
Subject: Engine teardown video
gearjammer: For those of you who have considered an engine teardown for whatever reason, but didn't want to pull the trigger. Whether it was due to a lack of confidence in the unknown or just like to watch someone ...

Latest reply, 5/27/2012
Spydr: Helps to see it done at least once, right?Engine teardown video

7 posts, last by:

Spydr

In: Bolt Ons, 5/24/2012, 13 replies
Subject: Do I really need push & pull cables?
DropkickFace: Heard somewhere you only need 1? How's that? Pros? Cons? James

Latest reply, 5/27/2012
Booster: If running a HSR carb the push don't work (for me anyway).Do I really need push & pull cables?

14 posts, last by:

Booster

In: Maintenance, 5/25/2012, 12 replies
Subject: I messed up the Barnett conversion some how
espressodude: Well I changed everything out and did as the instructions said to, I think. I don't think the clutch is engaging, when the bike is in gear pull the clutch handle and the wheel keeps on a turning. It may ...

Latest reply, 5/26/2012
Greysnake: Glad it worked out and your clutch will have a better feel to it.:)I messed up the Barnett conversion some how

13 posts, last by:

Greysnake

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.