Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Road Star Forum General Miscellaneous
Re:iridium plugs, do you gap
Go to bottom Post Reply Favoured: 0
TOPIC: Re:iridium plugs, do you gap
#228587
oldsoldir (User)
Fresh Boarder
Posts: 81
graphgraph
User Offline Click here to see the profile of this user
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
I seem to having a problem getting the last plug into the front right cylinder head. The plug does not want to go in straight and binds after a few turns. Is there a secret to this particular one or do I need to take a breath and go back later.

Thanks
 
Logged Logged  
  The administrator has disabled public write access.
#228590
cartersta (User)
jackncoke summer coolant, winter antifreeze
Platinum Boarder
Posts: 1562
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: screamer alabama Birthdate: 1956-10-04
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
take a breath, have had that problem getting it to start, dont force it whatever you do, i sometime spin it backwards to get o feel of the whole, then start forwards, doc or fb will chime in i hope
 
Logged Logged  
 
  The administrator has disabled public write access.
#228704
oldsoldir (User)
Fresh Boarder
Posts: 81
graphgraph
User Offline Click here to see the profile of this user
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
Thanks guys,

All done...just needed to take a deep breath and call my Brother in Law who is a mechanic....15 minutes later..done.
 
Logged Logged  
  The administrator has disabled public write access.
#228815
kadoc (User)
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
going to swap out for iridium plugs in the AM..what is the part number for o6 rodie...if anyone knows and where have you all found the best place to buy? Everything i have read says this is a must ....haven't changed since new...don't fix what isn't broken i always say....anyway thanks for anyhelp.
 
Logged Logged  
  The administrator has disabled public write access.
#228822
PapaTom (Moderator)
I said 4 quarts.
Moderator
Posts: 3178
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Washington/St. George, UT Birthdate: 1950-11-17
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
kadoc, it's NGK #7803. Try Advnced Auto, Autozone, etc. I got mine from Amazon.com for $7.40 with free shipping. I've seen them run from $6 - $7+ each.
 
Logged Logged  
 

FREE SPIRIT 2007 Silverado
  The administrator has disabled public write access.
#228833
kadoc (User)
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
going to swap out for iridium plugs in the AM..what is the part number for o6 rodie...if anyone knows and where have you all found the best place to buy? Everything i have read says this is a must ....haven't changed since new...don't fix what isn't broken i always say....anyway thanks for anyhelp.
 
Logged Logged  
  The administrator has disabled public write access.
#228845
PapaTom (Moderator)
I said 4 quarts.
Moderator
Posts: 3178
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Washington/St. George, UT Birthdate: 1950-11-17
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
Some have tried Autolites too. Same part# I believe.
 
Logged Logged  
 

FREE SPIRIT 2007 Silverado
  The administrator has disabled public write access.
#228929
ROSSETAW (User)
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Re:iridium plugs, do you gap 2 Years, 7 Months ago  
got some today advance auto 6.99 ea ------------ gap was fine out of the box
 
Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Technical Discussions, 5/26/2012, 28 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...
Latest reply, 5/27/2012
Darn: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my ...advice on tail bags for a road trip.
29 posts, last by:
Darn
In: Maintenance, 5/27/2012, 2 replies
Subject: Problem Shifting
evillaleon: Hi, i am new in the forum. Yesterday i bought a 2001 Road Star Silverado. At first ride i had some problem shifting but thought that could be my fault. As soon as i drove it home, i start having ...
Latest reply, 5/27/2012
Blackroadie: There was a recall on your bike for the tranny...do u know if it was done?Problem Shifting
3 posts, last by:
Blackroadie
In: Bolt Ons, 5/26/2012, 30 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/27/2012
Darn: That would be easy with my setup, the only thing is everyone would have to have the sissy bar, ...Flag mounts for 6"x9"
31 posts, last by:
Darn
In: Bike Talk, 5/27/2012, 9 replies
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...
Latest reply, 5/27/2012
Stevie: Post here or send me a pm when your coming my way. Idyllwild is awesome, and I go up to big ...Road Star Ride Tomorrow
10 posts, last by:
Stevie
In: Bike Talk, 5/24/2012, 20 replies
Subject: Warrior starter
River: I am thinking of putting on a Warrior starter even though my bike only has 2600 miles on it. What do you guys think of doing that?
Latest reply, 5/27/2012
Ricohoc: i second your opinion.. did the same with mine plus the wires,warrior relay and a 310amp battery..man ...Warrior starter
21 posts, last by:
Ricohoc
In: Jetting, 5/27/2012
Subject: fuel air mixture
Ttown: Can any one tell me the best and simplest method for setting the fuel air mixture? I believe that my bike is running lean now, and would like to adjust it for optimal efficiency. And what is the best ...
fuel air mixture
new topic by:
Ttown
In: Electrical/Electronics, 5/27/2012, 7 replies
Subject: Bike won't start.
Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ...
Latest reply, 5/27/2012
Ricohoc: Bike won't start.
8 posts, last by:
Ricohoc
In: Introductions, 5/27/2012, 24 replies
Subject: Hello from TN.
Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ...
Latest reply, 5/27/2012
blue star: :welcome: from N.E. Louisiana.Hello from TN.
25 posts, last by:
blue star
In: Website General, 5/27/2012, 17 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...
Latest reply, 5/27/2012
blue star: After you put in city and state, you have to hit the SUBMIT button at the bottom.Members by location.
18 posts, last by:
blue star
In: Jetting, 5/27/2012, 1 reply
Subject: Thank you
FF56: I would like to thank Curt and Erbman. Curt Thank you for posting the info on your web site about how the carbs on these bikes work, been every informative. Erbman Thank you for you Stop thread, ...
Latest reply, 5/27/2012
Erbman02: thats the idle adjuster under the filter. Works hand in hand with pilot screw for idle adjustment. ...Thank you
2 posts, last by:
Erbman02
In: Rides, Meets, Events, 5/14/2012, 87 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...
Latest reply, 5/27/2012
pastornj: You can add me to the group,and I'll help with whatever I can. I'm in Fayetteville - not sure how far ...WNC Meet and Greet
88 posts, last by:
pastornj
In: Maintenance, 5/27/2012, 14 replies
Subject: Low Fuel Light
moreland4: This is my first riding season with the HSR 42 and being pumpless. Trying to recall when the low fuel light typically comes on. Does it light up before or after switching to reserve? Asking because ...
Latest reply, 5/27/2012
Road*Dave: Your new petcock pickup should be the same height as the stock petcock you remove, otherwise the pickup ...Low Fuel Light
15 posts, last by:
Road*Dave
In: Pics of My Ride, 5/27/2012, 13 replies
Subject: Road Glide fairing finally installed
polishdog: Not sure if I like it yet, still on the fence. It might just end up on ebay... that way I can get hard bags and maybe duals!
Latest reply, 5/27/2012
Stevie: looks great, buyer's remorse? give it some time!Road Glide fairing finally installed
14 posts, last by:
Stevie
In: Maintenance, 5/27/2012
Subject: Stupid mistake ok outcome
FF56: So I installed a new set of EBC HH pads on the front yesterday, changed the fluid with DOT 4, only had time to ride around the block. Front brake seemed weak, more pull than normal, which wasn't that ...
Stupid mistake ok outcome
new topic by:
FF56
In: Bike Talk, 4/30/2012, 37 replies
Subject: S.O.S all roadstar gurus...HELP
rballew: I still haven't solved the issue with my signals,speedo,odometer,clock & fuel gauge working imtermittenly or they work until i touch the brakes(front or rear) the brake light and horn will not work at ...
Latest reply, 5/27/2012
Bonzaiii: rballew started the thread and I "bonzaii" posted on the very next post that I was having the exact same ...S.O.S all roadstar gurus...HELP
38 posts, last by:
Bonzaiii
In: Bike Talk, 5/27/2012
Subject: Awesome deal for someone in NC
Locke6169: http://charlotte.craigslist.org/mcy/3041680137.html Just saw this bike and thought I would pass it along.
Awesome deal for someone in NC
new topic by:
Locke6169
In: Jetting, 5/24/2012, 17 replies
Subject: accelerator pump squirt
rooftop: I've been trying to find out where the accelerator pump squirt should be aimed.It seems some say it should strike the needle in the center and some say off to the side.I can rotate it up or down but not ...
Latest reply, 5/27/2012
rooftop: Erbman02, I know that when the beast is warn and running, that any gas mixture should atomize before ...accelerator pump squirt
18 posts, last by:
rooftop
In: Bike Talk, 5/27/2012, 4 replies
Subject: NEW BIKE
roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ...
Latest reply, 5/27/2012
tibadoe: If you have any questions about your new Venture, this is a good forum: My brother has a Venture and ...NEW BIKE
5 posts, last by:
tibadoe
In: Miscellaneous, 4/19/2012, 12 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/27/2012
Stevie: hey man! sorry I just saw this guess by now you already saw the show lol laffing devils ...Hey Stevie...
13 posts, last by:
Stevie
In: Miscellaneous, 5/27/2012
Subject: Antic euro made bikes
saab9k: http://www.ukwheels.com/motorbikes.asp I like the Nimbus with sidecar.
Antic euro made bikes
new topic by:
saab9k
In: Maintenance, 4/22/2012, 21 replies
Subject: Intake manifold
jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ...
Latest reply, 5/27/2012
Erbman02: Thats why my instructor said to have a casting place take a look at it. Found one in Tampa. So ...Intake manifold
22 posts, last by:
Erbman02
In: Bike Talk, 5/27/2012, 6 replies
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...
Latest reply, 5/27/2012
Erbman02: next time you accelerate, see how rich you get, 13.5 AFR is needed to achieve max Tq. If you can't hit ...Interesting fact
7 posts, last by:
Erbman02
In: Non Motorcycle Topics, 5/26/2012, 29 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from John)
Latest reply, 5/27/2012
brown91redcam: Thank you to all those that are serving and have served our great country we all owe our gratitude for ...Thank you, all who served.
30 posts, last by:
brown91redcam
In: Non Motorcycle Topics, 5/25/2012, 9 replies
Subject: How To Catch A Bear
jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ...
Latest reply, 5/27/2012
buckshot: :laugh: :laugh: My 13 year old grandson loved it to.How To Catch A Bear
10 posts, last by:
buckshot
In: Non Motorcycle Topics, 5/25/2012, 8 replies
Subject: Eyelet/Grommet Machine info?
Ricohoc: I know this is a motorcycle forum, but this is the "Non Motorcycle Topics" area. :laugh: Anyone here have any knowledge/experience with an eyelet/grommet machine? I've been thinking ...
Latest reply, 5/27/2012
buckshot: Check out . The table top style would be a good one. You could use thicker mat. ...Eyelet/Grommet Machine info?
9 posts, last by:
buckshot
In: Maintenance, 5/27/2012, 2 replies
Subject: front brakes dragging
murshes: i noticed the handling on my bike has changed recentley. so i jacked it up and spun the front wheel. i can only get maybe half a rotation when i spin it. i cant get the front brakes to stop dragging. any ...
Latest reply, 5/27/2012
Curt: They all rub the pistons don't retract far enough to keep the pad off the rotor. If you have too much ...front brakes dragging
3 posts, last by:
Curt
In: Introductions, 5/26/2012, 23 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/27/2012
buckshot: :welcome: from Northeast IowaHello from the Region
24 posts, last by:
buckshot
In: Bolt Ons, 5/26/2012, 20 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...
Latest reply, 5/27/2012
dvblair: oops didn't read all the posts, but if anyone wants them they are for sale.New Handlebars - Stock Grips?
21 posts, last by:
dvblair
In: Bike Talk, 5/27/2012, 3 replies
Subject: help needed : Road Star "Ultra" mods
Chevyhoss: Good Afternoon Everyone, Posted on another topic earlier today but here goes... It's been quite awhile since I have posted on here but the "Outta Here" thread caught my interest. My wife's ...
Latest reply, 5/27/2012
ultrastar: Keith when I did mIne I went with all fiberglass parts the only PVC part on my bike is the HD lower fairing ...help needed : Road Star "Ultra" mods
4 posts, last by:
ultrastar
In: Rides, Meets, Events, 5/27/2012, 1 reply
Subject: Seaside Bike Fest, 2nd week of July
River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out.
Latest reply, 5/27/2012
Shadowofself: I usually ride down even if just for a day trip. Just got Roadie so will be a different ride this year. DanSeaside Bike Fest, 2nd week of July
2 posts, last by:
Shadowofself




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.