Re:h-d chrome lowers questions - Road Star Forum

	Road Star Forum	Forum Flat View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

General

Bike Talk

Re:h-d chrome lowers questions (1 viewing) (1) Guest

Favoured: 0

TOPIC: Re:h-d chrome lowers questions

Forum Tools

#229986

dcoley (User)

Junior Boarder

Posts: 184

Re:h-d chrome lowers questions 2 Years, 4 Months ago

I just installed a set last weekend used the same metheod as MS-1700.
I had my windshield set at the highest position and took the bike out and all was fine they cut down on the buffeting OK, but there was a gap between the bottom of the windshield and the top of the lower.

This looked kinda dumm to me so I went and dropped my windshield down to the bottom and closed the gap all looked much better took the bike back out and at 60 + mph the harmonics started from somewhere I can only assume from the new set-up ? I didn't have the noise when the w-shield was raised to the top.

Has anyone else had noise with HD-lowers at the high speeds ?

Logged

DColey

The administrator has disabled public write access.

Topics

Author

Date

h-d chrome lowers questions

bartish

2009/09/28 18:30

Re:h-d chrome lowers questions

MS1700

2009/09/28 18:55

Re:h-d chrome lowers questions

Southwest

2009/09/28 19:16

Re:h-d chrome lowers questions

Lakecharles

2009/09/28 19:24

Re:h-d chrome lowers questions

chico

2009/09/28 20:04

Re:h-d chrome lowers questions

chico

2009/09/28 20:05

Re:h-d chrome lowers questions

Lumberjack

2009/09/28 21:15

Re:h-d chrome lowers questions

Rubber Duck

2009/09/28 21:35

Re:h-d chrome lowers questions

Lumberjack

2009/10/09 10:13

Re:h-d chrome lowers questions

chico

2009/09/28 21:16

Re:h-d chrome lowers questions

chico

2009/09/28 21:40

Re:h-d chrome lowers questions

MS1700

2009/09/29 05:03

Re:h-d chrome lowers questions

DocShadow

2009/09/29 09:58

Re:h-d chrome lowers questions

Greeny

2009/09/29 12:29

Re:h-d chrome lowers questions

Shoshin

2009/09/29 11:06

Re:h-d chrome lowers questions

dcoley

2009/10/09 21:01

Re:h-d chrome lowers questions

Mark7

2009/10/10 04:54

Forum List

General

Bike Talk

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Bike Talk, 2/11/2012, 9 replies Subject: Solo Seats- Narrowing down the list, want opinions Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ... Latest reply, 2/11/2012 rballew: the E.D seat looks too big for the bike. imho,it just doesn't flow with the bike.Solo Seats- Narrowing down the list, want opinions 10 posts, last by: rballew In: Body/Frame, 2/11/2012, 10 replies Subject: Stock heel/toe shifter….. ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ... Latest reply, 2/11/2012 ironman: older models had a steel stamping/weldment. Newer models,don't know what year they changed/improved are ...Stock heel/toe shifter….. 11 posts, last by: ironman In: Bike Talk, 2/11/2012, 1 reply Subject: four corners ride? 129drifter: anyone done the four corners ride on a Roadstar? What say ye? :) http://www.usa4corners.org/main.htm Latest reply, 2/11/2012 twobig4x4s: i want to from indiana,indianapolis four corners ride? 2 posts, last by: twobig4x4s In: Bike Talk, 2/11/2012, 2 replies Subject: Windshield Bag DarkStar74: I am wanting to get a decent priced 3 pocket studded windshield bag. Not sure on the fitment on the stock Silverado windhield. I was hoping you guys could help me out with suggestions and maybe even someone ... Latest reply, 2/11/2012 ozarkpreacher: I put this one on my bike when I had just the windshield. I used velcro 2.5 wide and went all the ...Windshield Bag 3 posts, last by: ozarkpreacher In: Non Motorcycle Topics, 2/11/2012, 7 replies Subject: Growing old, kicking and screaming mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ... Latest reply, 2/11/2012 Questcap: "Old age isn't for sissies," my mom always said. My uncle would say, "There's a lot of lead in them ...Growing old, kicking and screaming 8 posts, last by: Questcap In: Bike Talk, 2/11/2012, 2 replies Subject: Stage 3 problem B1gRed: So I'm working over a set of stock pipes for my 09 R* to make them stage 3. I made it all the way to the point where I wiggle the center tube until it comes out. Well it broke loose but it seems it somehow ... Latest reply, 2/11/2012 Questcap: I'm not able to help, but I am very much interested in the outcome, as I'm about to gut a set of stock ...Stage 3 problem 3 posts, last by: Questcap In: Bike Talk, 2/10/2012, 12 replies Subject: Waht Tires do you ride??? ear3: Latest reply, 2/11/2012 SMOKINJOE: yea,,, can't help you with the white walls, but i can turn you onto a really nice all around long lasting ...Waht Tires do you ride??? 13 posts, last by: SMOKINJOE In: Bike Talk, 2/11/2012, 6 replies Subject: Finallt done...yah right!!!! Dragoon: prior to having my back surgery in January, i did all the mechanical work to my bike (coils, suspension, heads and valve, carburetor and upgraded stator). The bike runs like lightning. Then the day before ... Latest reply, 2/11/2012 TampaSVT: Looking good, brotha... ;) RichFinallt done...yah right!!!! 7 posts, last by: TampaSVT In: Non Motorcycle Topics, 2/11/2012, 3 replies Subject: Thnx! Inubus: I bought my 07 2 years ago and decided to check out the web to see what I could find out about this bike. I found this place! Lucky me. Great advice in just about everything I could think of asking. I ... Latest reply, 2/11/2012 TampaSVT: +1, Inubus. ;) RichThnx! 4 posts, last by: TampaSVT In: Bike Talk, 2/11/2012, 5 replies Subject: Any problem using Harley bars? Doc_V: Was thinking about getting some new bars and was curious if Harley bars can be used on a Roadie? ...Assuming they're 1 in. in diameter of course. Latest reply, 2/11/2012 TampaSVT: People will keep trying to win you over with free hotdogs if you put HD bars on. But, I don't know ...Any problem using Harley bars? 6 posts, last by: TampaSVT In: Rides, Meets, Events, 2/11/2012, 3 replies Subject: Finally got to blow out the cobwebs today... Road Dog: ...that is, after all of this awesome rain that we've needed and working for 2 weeks without a weekend break, it was time for me and the wife to hop on the R* and ride. We rode out to Round Top, TX ... Latest reply, 2/11/2012 Don Dickinson: in the teens in minneapolis today, however, the weatherman says 40 or so by wed. fingers are crossed:)Finally got to blow out the cobwebs today... 4 posts, last by: Don Dickinson In: Non Motorcycle Topics, 2/11/2012, 4 replies Subject: Lets go flying saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152 Latest reply, 2/11/2012 samw: I know what you mean, I did some real ugly ones in a 172.:ohmy:Lets go flying 5 posts, last by: samw In: Bike Talk, 2/11/2012, 2 replies Subject: 2012 Road Star Silverado S donelam304: Has anyone seen the new Road Star Silverado S yet. We finally got one in at the shop i work part time at and put her together. The first thing i noticed and fell in love with was the entire front end. ... Latest reply, 2/11/2012 Tug: yeah them are pretty :woohoo: http://www.chromemasters.com/2012 Road Star Silverado S 3 posts, last by: Tug In: Pics of My Ride, 6/27/2011, 52 replies Subject: Posting Pics Step By Step!!! CPORetired: I know alot of people are having trouble with the posting of pics so since I am bored to death today I thought I would try to help. First the programs I use are all available online and do NOT cost anything. ... Latest reply, 2/11/2012 geester: Thanks CPO.Posting Pics Step By Step!!! 53 posts, last by: geester In: Bike Talk, 2/11/2012, 5 replies Subject: This tachometer? dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ... Latest reply, 2/11/2012 Curt: Nothing wrong with that one I can make a polished SS bracket to fit your stock risers that looks like ...This tachometer? 6 posts, last by: Curt In: Maintenance, 2/10/2012, 21 replies Subject: Ignition switch and battery ???? BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ... Latest reply, 2/11/2012 jd750ace: Mark7 wrote: Re:Ignition switch and battery ???? 1 Day, 12 Hours ago I just replaced my battery ...Ignition switch and battery ???? 22 posts, last by: jd750ace In: Bike Talk, 2/11/2012, 2 replies Subject: chrome wheel kryinggame: Guys, I'm kicking an idea around: chrome wheel. For you guys who went chrome, did you do both front and back wheels or solely the front wheel? I'm wondering if it would look horrible if I only went ... Latest reply, 2/11/2012 bigflip: When I did my 21" conversion, I did the front first, then did the rear a few months later. I couldn't ...chrome wheel 3 posts, last by: bigflip In: Introductions, 1/30/2012, 35 replies Subject: My First R* LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ... Latest reply, 2/11/2012 smokescreens: Man im glad i dont have a mod monkey hanging around:ohmy: that could make me broke:ohmy: :ohmy:My First R* 36 posts, last by: smokescreens In: Non Motorcycle Topics, 2/10/2012, 6 replies Subject: Got my new boots! chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ... Latest reply, 2/11/2012 xbeaus: Got my new boots! 7 posts, last by: xbeaus In: Pics of My Ride, 1/28/2012, 33 replies Subject: I'm back with a new toy!! Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ... Latest reply, 2/11/2012 Keeb: Hmmmmmm....guess its time for a new sig pic. The Purple Beast has moved on from my garage now, Guess ...I'm back with a new toy!! 34 posts, last by: Keeb In: Electrical/Electronics, 2/11/2012, 3 replies Subject: new key switch help 250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ... Latest reply, 2/11/2012 Erbman02: well, the other 2 wires are not connected for a reason at the key switch until the key is on. I'd check ...new key switch help 4 posts, last by: Erbman02 In: Bike Talk, 2/11/2012, 1 reply Subject: new apes coming tristate: just ordered new pc apes, after alot of looking found these guys, ROAD-6 customs. All good reveiws, all "good ol boys" doing the work... Latest reply, 2/11/2012 Chadmans06: Nice Tristae, they were my first choice, the only reason I didn't get them was because I scored some ...new apes coming 2 posts, last by: Chadmans06 In: Bike Talk, 2/11/2012, 1 reply Subject: Anyone familiar with this drivers backrest? Doc_V: Saw this on Amazon for $145. Anyone know anything about them? On ... Latest reply, 2/11/2012 pigpen: This is a great design for the Roadie. It's design is taken from the bak-up backrest design. this design ...Anyone familiar with this drivers backrest? 2 posts, last by: pigpen In: Bike Talk, 2/5/2012, 9 replies Subject: WTB: Landon's Grab Bar major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ... Latest reply, 2/11/2012 major443: Thanks for the info, hopefully he'll see this post if he's still making them, cheers.....Major WTB: Landon's Grab Bar 10 posts, last by: major443 In: Non Motorcycle Topics, 2/11/2012, 3 replies Subject: New family member greyphart: Names Reggie. 4 1/2 year old Golden ... Latest reply, 2/11/2012 tarcon: I have a Doberman and an Irish Setter. the Irish Setter goes balistic when I just go to get on my bike. ...New family member 4 posts, last by: tarcon In: Bolt Ons, 2/11/2012, 1 reply Subject: Decals moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. (some Yamaha ones on the bottom of page ... Latest reply, 2/11/2012 Tug: Here are some more http://home.comcast.net/~tpbiker1/Motorcycle.html http://www.motorcycledecalgraphics.com/ http://www.jamesdeancreations.com/yamaha_decals.htmDecals 2 posts, last by: Tug In: Bike Talk, 2/6/2012, 8 replies Subject: lost drive... where to buy? masterhermit: yeah... ok i found the cause...... thanks to RSC members, drive pulley got no teeth.....:( i posted a pic in the thread in tech. now the problem i have is finding a replacement, according to Yamaha and ... Latest reply, 2/11/2012 HotRodRStar: I just found a pulley that recently came up on Ebay if you are still in the market ... Rodlost drive... where to buy? 9 posts, last by: HotRodRStar In: Maintenance, 2/10/2012, 10 replies Subject: Throtle return rate espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ... Latest reply, 2/11/2012 espressodude: Thanks guys I adjusted the cable at the bars and works good now. I think my carb is leaking but it ...Throtle return rate 11 posts, last by: espressodude In: Bolt Ons, 2/10/2012, 4 replies Subject: Floorboard Extensions Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob Latest reply, 2/11/2012 chrisxv1600al: Rob, Thats exactly what I was thinking when I made my spacers. My bike has the Kuryakyn twin Velocity ...Floorboard Extensions 5 posts, last by: chrisxv1600al In: Bike Talk, 2/10/2012, 23 replies Subject: this road star is to cool!!! smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow Latest reply, 2/11/2012 Big Dawg: Very nice ride! BDthis road star is to cool!!! 24 posts, last by: Big Dawg

New Forum Posts

In: Bike Talk, 2/11/2012, 9 replies
Subject: Solo Seats- Narrowing down the list, want opinions
Doc_V: I've narrowed down the list and would like to get some opinions based on the following criteria in order of importance: 1) Comfort 2) The Lower the better ...

Latest reply, 2/11/2012
rballew: the E.D seat looks too big for the bike. imho,it just doesn't flow with the bike.Solo Seats- Narrowing down the list, want opinions

10 posts, last by:

rballew

In: Body/Frame, 2/11/2012, 10 replies
Subject: Stock heel/toe shifter…..
ROADGRABBER: Didn’t want to hijack dvblair’s ’’shifter mod’’ thread! So here goes! I have the early 02 shifter and personnaly I find it much easier to use the heel shifter to rev up, I find that it’s a more ergonomic ...

Latest reply, 2/11/2012
ironman: older models had a steel stamping/weldment. Newer models,don't know what year they changed/improved are ...Stock heel/toe shifter…..

11 posts, last by:

ironman

In: Bike Talk, 2/11/2012, 1 reply
Subject: four corners ride?
129drifter: anyone done the four corners ride on a Roadstar? What say ye? :) http://www.usa4corners.org/main.htm

Latest reply, 2/11/2012
twobig4x4s: i want to from indiana,indianapolis four corners ride?

2 posts, last by:

twobig4x4s

In: Bike Talk, 2/11/2012, 2 replies
Subject: Windshield Bag
DarkStar74: I am wanting to get a decent priced 3 pocket studded windshield bag. Not sure on the fitment on the stock Silverado windhield. I was hoping you guys could help me out with suggestions and maybe even someone ...

Latest reply, 2/11/2012
ozarkpreacher: I put this one on my bike when I had just the windshield. I used velcro 2.5 wide and went all the ...Windshield Bag

3 posts, last by:

ozarkpreacher

In: Non Motorcycle Topics, 2/11/2012, 7 replies
Subject: Growing old, kicking and screaming
mbk: Couple in their nineties are both having problems remembering things. During a checkup, the doctor tells them that they're physically okay, but they might want to start writing things down to help them ...

Latest reply, 2/11/2012
Questcap: "Old age isn't for sissies," my mom always said. My uncle would say, "There's a lot of lead in them ...Growing old, kicking and screaming

8 posts, last by:

Questcap

In: Bike Talk, 2/11/2012, 2 replies
Subject: Stage 3 problem
B1gRed: So I'm working over a set of stock pipes for my 09 R* to make them stage 3. I made it all the way to the point where I wiggle the center tube until it comes out. Well it broke loose but it seems it somehow ...

Latest reply, 2/11/2012
Questcap: I'm not able to help, but I am very much interested in the outcome, as I'm about to gut a set of stock ...Stage 3 problem

3 posts, last by:

Questcap

In: Bike Talk, 2/10/2012, 12 replies
Subject: Waht Tires do you ride???
ear3:

Latest reply, 2/11/2012
SMOKINJOE: yea,,, can't help you with the white walls, but i can turn you onto a really nice all around long lasting ...Waht Tires do you ride???

13 posts, last by:

SMOKINJOE

In: Bike Talk, 2/11/2012, 6 replies
Subject: Finallt done...yah right!!!!
Dragoon: prior to having my back surgery in January, i did all the mechanical work to my bike (coils, suspension, heads and valve, carburetor and upgraded stator). The bike runs like lightning. Then the day before ...

Latest reply, 2/11/2012
TampaSVT: Looking good, brotha... ;) RichFinallt done...yah right!!!!

7 posts, last by:

TampaSVT

In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: Thnx!
Inubus: I bought my 07 2 years ago and decided to check out the web to see what I could find out about this bike. I found this place! Lucky me. Great advice in just about everything I could think of asking. I ...

Latest reply, 2/11/2012
TampaSVT: +1, Inubus. ;) RichThnx!

4 posts, last by:

TampaSVT

In: Bike Talk, 2/11/2012, 5 replies
Subject: Any problem using Harley bars?
Doc_V: Was thinking about getting some new bars and was curious if Harley bars can be used on a Roadie? ...Assuming they're 1 in. in diameter of course.

Latest reply, 2/11/2012
TampaSVT: People will keep trying to win you over with free hotdogs if you put HD bars on. But, I don't know ...Any problem using Harley bars?

6 posts, last by:

TampaSVT

In: Rides, Meets, Events, 2/11/2012, 3 replies
Subject: Finally got to blow out the cobwebs today...
Road Dog: ...that is, after all of this awesome rain that we've needed and working for 2 weeks without a weekend break, it was time for me and the wife to hop on the R* and ride. We rode out to Round Top, TX ...

Latest reply, 2/11/2012
Don Dickinson: in the teens in minneapolis today, however, the weatherman says 40 or so by wed. fingers are crossed:)Finally got to blow out the cobwebs today...

4 posts, last by:

Don Dickinson

In: Non Motorcycle Topics, 2/11/2012, 4 replies
Subject: Lets go flying
saab9k: This is the fun part http://www.youtube.com/watch?feature...&v=mMvLuUJFHYk Took me a couple of hours to master this in a cessna 152

Latest reply, 2/11/2012
samw: I know what you mean, I did some real ugly ones in a 172.:ohmy:Lets go flying

5 posts, last by:

samw

In: Bike Talk, 2/11/2012, 2 replies
Subject: 2012 Road Star Silverado S
donelam304: Has anyone seen the new Road Star Silverado S yet. We finally got one in at the shop i work part time at and put her together. The first thing i noticed and fell in love with was the entire front end. ...

Latest reply, 2/11/2012
Tug: yeah them are pretty :woohoo: http://www.chromemasters.com/2012 Road Star Silverado S

3 posts, last by:

Tug

In: Pics of My Ride, 6/27/2011, 52 replies
Subject: Posting Pics Step By Step!!!
CPORetired: I know alot of people are having trouble with the posting of pics so since I am bored to death today I thought I would try to help. First the programs I use are all available online and do NOT cost anything. ...

Latest reply, 2/11/2012
geester: Thanks CPO.Posting Pics Step By Step!!!

53 posts, last by:

geester

In: Bike Talk, 2/11/2012, 5 replies
Subject: This tachometer?
dingodango88: Does anyone know if this will work with an 03. I know it says specifically for the 1700...but I like this one because is the same riser clamp that I have. Does anyone have this specific tach? I was also ...

Latest reply, 2/11/2012
Curt: Nothing wrong with that one I can make a polished SS bracket to fit your stock risers that looks like ...This tachometer?

6 posts, last by:

Curt

In: Maintenance, 2/10/2012, 21 replies
Subject: Ignition switch and battery ????
BEAMS123: So I took my bike to this harley guy that knows everything about bikes.....told him over the phone how to get the seat off yet after 1.5 hrs still no luck. So I drove out to his shop and took it off for ...

Latest reply, 2/11/2012
jd750ace: Mark7 wrote: Re:Ignition switch and battery ???? 1 Day, 12 Hours ago I just replaced my battery ...Ignition switch and battery ????

22 posts, last by:

jd750ace

In: Bike Talk, 2/11/2012, 2 replies
Subject: chrome wheel
kryinggame: Guys, I'm kicking an idea around: chrome wheel. For you guys who went chrome, did you do both front and back wheels or solely the front wheel? I'm wondering if it would look horrible if I only went ...

Latest reply, 2/11/2012
bigflip: When I did my 21" conversion, I did the front first, then did the rear a few months later. I couldn't ...chrome wheel

3 posts, last by:

bigflip

In: Introductions, 1/30/2012, 35 replies
Subject: My First R*
LuDogStar: Hello everyone! Just purchased my first Road Star. It is a 2005 Black Cherry (like new). I am really enjoying this bike and hope ...

Latest reply, 2/11/2012
smokescreens: Man im glad i dont have a mod monkey hanging around:ohmy: that could make me broke:ohmy: :ohmy:My First R*

36 posts, last by:

smokescreens

In: Non Motorcycle Topics, 2/10/2012, 6 replies
Subject: Got my new boots!
chrisxv1600al: Got my new boots! Milwaukee "Mechanics". $83.99 after Gold Club membership discount from J & P Cycles. Also ...

Latest reply, 2/11/2012
xbeaus: Got my new boots!

7 posts, last by:

xbeaus

In: Pics of My Ride, 1/28/2012, 33 replies
Subject: I'm back with a new toy!!
Keeb: Well my move over to the Mean Streak didn't last long. I got my tax returns and found This bad boy for $3500 in Daytona lastnight. 2001 with 17K miles, Corbin bags, Wrapped V&H Longshots, Barons BAK, ...

Latest reply, 2/11/2012
Keeb: Hmmmmmm....guess its time for a new sig pic. The Purple Beast has moved on from my garage now, Guess ...I'm back with a new toy!!

34 posts, last by:

Keeb

In: Electrical/Electronics, 2/11/2012, 3 replies
Subject: new key switch help
250WIDE: i just got a hotop dual coil mount and new kew switch from bms chopper. I cant figure out how to wire the factory 4 wires to it. factory wires are red,blue-black,blue-yellow, brown-blue.... the new switch ...

Latest reply, 2/11/2012
Erbman02: well, the other 2 wires are not connected for a reason at the key switch until the key is on. I'd check ...new key switch help

4 posts, last by:

Erbman02

In: Bike Talk, 2/11/2012, 1 reply
Subject: new apes coming
tristate: just ordered new pc apes, after alot of looking found these guys, ROAD-6 customs. All good reveiws, all "good ol boys" doing the work...

Latest reply, 2/11/2012
Chadmans06: Nice Tristae, they were my first choice, the only reason I didn't get them was because I scored some ...new apes coming

2 posts, last by:

Chadmans06

In: Bike Talk, 2/11/2012, 1 reply
Subject: Anyone familiar with this drivers backrest?
Doc_V: Saw this on Amazon for $145. Anyone know anything about them? On ...

Latest reply, 2/11/2012
pigpen: This is a great design for the Roadie. It's design is taken from the bak-up backrest design. this design ...Anyone familiar with this drivers backrest?

2 posts, last by:

pigpen

In: Bike Talk, 2/5/2012, 9 replies
Subject: WTB: Landon's Grab Bar
major443: Morning all...looking to buy one of these grab bars for my bike, they're a pretty hot commodity and tough to find. If you have one and would like to sell it please give me a shout. I also have a few items ...

Latest reply, 2/11/2012
major443: Thanks for the info, hopefully he'll see this post if he's still making them, cheers.....Major WTB: Landon's Grab Bar

10 posts, last by:

major443

In: Non Motorcycle Topics, 2/11/2012, 3 replies
Subject: New family member
greyphart: Names Reggie. 4 1/2 year old Golden ...

Latest reply, 2/11/2012
tarcon: I have a Doberman and an Irish Setter. the Irish Setter goes balistic when I just go to get on my bike. ...New family member

4 posts, last by:

tarcon

In: Bolt Ons, 2/11/2012, 1 reply
Subject: Decals
moreland4: Looking for a few good sites for decals. Here are a couple I've been browsing lately. (some Yamaha ones on the bottom of page ...

Latest reply, 2/11/2012
Tug: Here are some more http://home.comcast.net/~tpbiker1/Motorcycle.html http://www.motorcycledecalgraphics.com/ http://www.jamesdeancreations.com/yamaha_decals.htmDecals

2 posts, last by:

Tug

In: Bike Talk, 2/6/2012, 8 replies
Subject: lost drive... where to buy?
masterhermit: yeah... ok i found the cause...... thanks to RSC members, drive pulley got no teeth.....:( i posted a pic in the thread in tech. now the problem i have is finding a replacement, according to Yamaha and ...

Latest reply, 2/11/2012
HotRodRStar: I just found a pulley that recently came up on Ebay if you are still in the market ... Rodlost drive... where to buy?

9 posts, last by:

HotRodRStar

In: Maintenance, 2/10/2012, 10 replies
Subject: Throtle return rate
espressodude: Hello All First sorry if this is a stupid question, I did do a search and couldn't find anything relative. When I used to ride a life time ago my throttle "sprang" back to the starting position. ...

Latest reply, 2/11/2012
espressodude: Thanks guys I adjusted the cable at the bars and works good now. I think my carb is leaking but it ...Throtle return rate

11 posts, last by:

espressodude

In: Bolt Ons, 2/10/2012, 4 replies
Subject: Floorboard Extensions
Roadstar_Rob: I'm looking to extend my driver boards out away from the bike. All of the extensions I've come across are for moving them forward. Anyone familiar with extension mod to set them out wider? Thanks, Rob

Latest reply, 2/11/2012
chrisxv1600al: Rob, Thats exactly what I was thinking when I made my spacers. My bike has the Kuryakyn twin Velocity ...Floorboard Extensions

5 posts, last by:

chrisxv1600al

In: Bike Talk, 2/10/2012, 23 replies
Subject: this road star is to cool!!!
smokescreens: i ran accross this on photobucket and man is this bike cool to me. look at the rear brakes on this thing and the shift linkage. and it has a warrior motor in it:woohoo: forgive the first pic. http://s995.photobucket.com/albums/af76/Yzftx7500/roadstar%20custom/?albumview=slideshow

Latest reply, 2/11/2012
Big Dawg: Very nice ride! BDthis road star is to cool!!!

24 posts, last by:

Big Dawg

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.