Folks

Gidday. I have a 2005 Roadie Midnight Star, 10 days old 1,200 miles, and its damn fine.

I have done stage 1 pipe mods, this was great, freeing the weld was a BUGGER but otherwise went well 6x 1/2inch in each pipe sounds groooovie not at all loud just deep rumble "perfect".

Now I'm interested in fitting a BAK, my questions are
1. Can I do this fine and still re-jet at this time but with the stock pipe with stage 1 mods,
2. Do I need the rev-unlimitr or dyna on 04/05, I had read elsewhere that the rev cut-oof was smoother and didnt have the dramatic cut-off of 99-03.

3. Am I wasting my money just dong a BAK upgrade without new pipe. According to Yamaha Speedster 03 brochure seems air kit alone is fine.


Okay thats all folks,

Cheers
Tone<br><br>Post edited by: tone, at: 2004/08/15 07:35

1. You can put the BAK on with stock Stage 1 pipes but you will need to re-jet. I had the same setup and it ran real bad using the stock needle.

2. You don't need the rev limiter or Dyna unless you're always racing. On those occasions when I go flat out from a light, I hit the limit but otherwise I don't notice and rarely rev it that high.

3. The BAK upgrade will be noticeable and you don't need the pipes but you will notice a difference when you put on more free-flowing pipes.

doc