At that point if you have everything, you're no more than 1-1.5hr from complete reassembly. Only one of the valves per rocker is adjustable by screw IIRC, the other is fixed. I just made sure they were both touching at the same time. I kind of miss doing the rebuild, it was pretty fun, but I'm definitely happy i'm done and she's on the road.

Well finally had the bike alltogether yesterday and was ready to break in the new cam and lifters this morning, however i received some bad news about my Grandfathers passing overnight and by the time i decided to get out and clear my head on the bike i had forgotten to change the old oil filter, so i ended up going for a short ride of about 12 miles / 20 klm`s with the new oil but using the old filter, i hope this wont be a problem. I ended up travelling that distance pretty much in 2nd gear the whole way at a speed of around 50 MLPH / 80 KPH , I have come home and all seems good so far, no noises or oil leaks so im feeling better about that, when i drained the oil there was some crap that had stuck to the new magnetic drain plugs and i guess that may be the case for the next few oil changes. Im also finding it quite difficult to buy Mobil 1 V Twin here so i just ordered 12 Quarts off Ebay and will have to wait for the delivery before i go any further, so a big "Thank You" to all who contributed to this post and lets hope the old oil filter or anything else doesnt comes back to bite me

Well it sounds like you are good to go so far. Congrats

Good to hear!

Good effort - congrats.