greenpus,,, can't you mount it on the shifter side ? [im[/img]
not this kit. it's meant to be mounted on the valve rod tubes.
Greenpus, I have the same oil pressure guage from SS Custom Cycles. Also am running V&H
Longshots. Ran into the problem of the oil pressure guage not clearing the rear exhaust header. When I contacted Shane, he seemed to indicate he had never heard of this issue before. He did say the guage was made with the intent of the stock exhaust in place. Overall, I had a good experience with Shane. He seemed helpful and replied to several of my emails.
Anyway, like others have said and done, I had an extended spacer made and ordered a new bolt to fit the added spacer length. Spacer was 4 inches and the bolt was an M6x130mm (or maybe it was 120mm, I ordered one of each to be sure). Ordered the bolts from Fastenal
. I used the supplied oil line from Shane.
Here's some pics of the finished job.
Hope this helps in some way.