Road Star Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: passing lamps
#55414
bigbad (User)
Fresh Boarder
Posts: 30
graphgraph
User Offline Click here to see the profile of this user
passing lamps 4 Years, 5 Months ago  
my 1700 roadstar has 35w bulbs,can i change to 55w piaa or do i need to stay with stock bulbs
 
Logged Logged  
  The administrator has disabled public write access.
#55415
Pop Rivet (User)
Platinum Boarder
Posts: 3123
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Website rwbaxter@cogeco.ca Location: Kingston Ontario Canada Birthdate: 1949-07-03
Re:passing lamps 4 Years, 5 Months ago  
You can go to the 55 watt but keep in mind ..that is an extra 40 watts total draw on the electrical system...also hotter in the little pot too

I put in 55 watt bulbs and then added the RTB controller which added more light at the back...BUT stressed out even more the electrical system...on braking and running...

I have a little voltmeter on my bike and it was spending too much time in the below green zone ..especially at idle...

I put back my stock 35 watt bulbs...the volt meter dances in the green zone and I am more comfortable with that

The KURY tribar passing lamps I have came with 35 watt bulbs...and the stock is 35 watt IMHO that is where you should leave it...
as well.. the sealed beams used in the passing lamps are 35 watts
60 watt hi beam along with a 70 watt passing lamp total is plenty of light
 
Logged Logged  
 
2009 Ultra Classic HD...2005 Silverado Road Star




MY WEBSITE HOG HEAVEN

Listen to the Road Star
  The administrator has disabled public write access.
#55438
bigbad (User)
Fresh Boarder
Posts: 30
graphgraph
User Offline Click here to see the profile of this user
Re:passing lamps 4 Years, 5 Months ago  
thanks pop rivet for the enformation i should have in my owners manual.
 
Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->
New Forum Posts
In: Maintenance, 4/22/2012, 19 replies
Subject: Intake manifold
jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ...
Latest reply, 5/27/2012
Spydr: Neil, Take your time, my friend. I just wanted to know that it arrived. SIntake manifold
20 posts, last by:
Spydr
In: Electrical/Electronics, 5/27/2012, 4 replies
Subject: Bike won't start.
Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ...
Latest reply, 5/27/2012
tibadoe: I would start simple - test the battery volts & load test. Battery may have lost a cell or just crapped ...Bike won't start.
5 posts, last by:
tibadoe
In: Bike Talk, 5/27/2012, 1 reply
Subject: NEW BIKE
roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ...
Latest reply, 5/27/2012
tibadoe: Congrats on your new Venture. They are nice rides. Don't forget to keep it tached up.NEW BIKE
2 posts, last by:
tibadoe
In: Introductions, 5/27/2012, 9 replies
Subject: Hello from TN.
Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ...
Latest reply, 5/27/2012
Roger7886: :welcome: from asheville ncHello from TN.
10 posts, last by:
Roger7886
In: Technical Discussions, 5/26/2012, 23 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...
Latest reply, 5/27/2012
Doc_V: Call me crazy, but I think there's something cool about a bike loaded with gear. B) Whenever I see ...advice on tail bags for a road trip.
24 posts, last by:
Doc_V
In: Bolt Ons, 5/26/2012, 28 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?
Latest reply, 5/27/2012
Darn: The angle iron was actually pretty easy to do, but the U-bolts I bought were too long so after I put ...Flag mounts for 6"x9"
29 posts, last by:
Darn
In: Rides, Meets, Events, 5/14/2012, 83 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...
Latest reply, 5/27/2012
ironman: Hey Smoke, if your going, swing thru NE Ohio & we'll ride down together. Rememeber we're heading ...WNC Meet and Greet
84 posts, last by:
ironman
In: Bike Talk, 5/26/2012, 3 replies
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...
Latest reply, 5/27/2012
USAFRETIRED: Post a picture of the sidecar. Might be able to identify it.Side Car mounting
4 posts, last by:
USAFRETIRED
In: Bike Talk, 5/21/2012, 30 replies
Subject: Qutta here
WhiteStarNC: Folks - after 6 years as a Road Star owner and forum member I just wanted to say thanks for all the help, community, support and laughs I have gotten from this forum. I road the Roadie to the Myrtle ...
Latest reply, 5/27/2012
Blagonravov: roadstarclinic.com is wonderful. There's always all of the ideal info in the ideas of my fingers. Thanks ...Qutta here
31 posts, last by:
Blagonravov
In: Rides, Meets, Events, 5/27/2012
Subject: Seaside Bike Fest, 2nd week of July
River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out.
Seaside Bike Fest, 2nd week of July
new topic by:
River
In: Bike Talk, 5/27/2012, 2 replies
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...
Latest reply, 5/27/2012
River: I don't know Erbman, it registers 14.1 to 4.5 instead of 14.1 to 4.7 so I guess that would be a decimal. ...Interesting fact
3 posts, last by:
River
In: Bolt Ons, 5/26/2012, 18 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...
Latest reply, 5/27/2012
brown91redcam: Thanks for the pics,I have a pair like those that I have been thinking of using on mine but they seemed ...New Handlebars - Stock Grips?
19 posts, last by:
brown91redcam
In: Electrical/Electronics, 5/26/2012, 18 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...
Latest reply, 5/27/2012
brown91redcam: I have seen the load equalizers at auto parts store near the bulbs,it is a inline resistor that simulates ...So much for simple
19 posts, last by:
brown91redcam
In: Miscellaneous, 5/26/2012, 12 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...
Latest reply, 5/27/2012
armybronco: I agree with Blue Star! At the very least the bill for ANY work should be cut by 1/2 if not 2/3!!!!:woohoo: ...Let the summer begin...(not quite)
13 posts, last by:
armybronco
In: Electrical/Electronics, 5/26/2012, 8 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...
Latest reply, 5/27/2012
Ricohoc: :laugh:Solar Pulse Battery Energy Power Charger?
9 posts, last by:
Ricohoc
In: Non Motorcycle Topics, 5/26/2012, 26 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)
Latest reply, 5/27/2012
armybronco: I am truly humbled by those that served our great country before me...if not for them I would not be ...Thank you, all who served.
27 posts, last by:
armybronco
In: Non Motorcycle Topics, 5/25/2012, 27 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...
Latest reply, 5/27/2012
Darn: I had a Cruisers Vee Express 30ft (not as new as the one your showing) but I loved it, hated to get rid ...I'm Torn
28 posts, last by:
Darn
In: Miscellaneous, 5/26/2012, 17 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...
Latest reply, 5/27/2012
Boatmark: I frequent a coupla other forums on the net and the RSC is the one I always find myself at the most. ...this clinic has shown its true greatness yet again
18 posts, last by:
Boatmark
In: Website General, 5/27/2012, 12 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...
Latest reply, 5/27/2012
BC1955: I tried to get the little house to show up user name when I post but it does not. What do I need to ...Members by location.
13 posts, last by:
BC1955
In: Bike Talk, 5/26/2012, 15 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?
Latest reply, 5/27/2012
BC1955: No Stevie, I changed out the stock relay arm to the Baron's. I still have the stock dog bones but a ...Changing the shock spring
16 posts, last by:
BC1955
In: Miscellaneous, 4/19/2012, 9 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:
Latest reply, 5/27/2012
SKWEARpeg: We have a whole generation of people out there, who's entire life is comprised of their Smart phone, ...Hey Stevie...
10 posts, last by:
SKWEARpeg
In: Introductions, 5/26/2012, 22 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.
Latest reply, 5/27/2012
Edge51: From B.C. that's Canada...where's NWI??? lol Hello from the Region
23 posts, last by:
Edge51
In: Non Motorcycle Topics, 5/27/2012, 10 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:
Latest reply, 5/27/2012
Edge51: booIt's 3:00 am
11 posts, last by:
Edge51
In: Bike Talk, 5/26/2012, 20 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...
Latest reply, 5/27/2012
About_Time: VWH...thanks for posting this. I think I've seen it before, but it was one of those types of things ...Road trip tool kit
21 posts, last by:
About_Time
In: Bike Talk, 5/27/2012, 2 replies
Subject: Road Star Ride Tomorrow
Stevie: A few of us are heading up to Julian California on our Roadies in the morning It's a pretty popular weekend motorcycle destination If anybody's in the San Diego area tomorrow, come on up They got ...
Latest reply, 5/27/2012
Stevie: Loading up as we speak First stop... Santa Ysabel for some breakfastRoad Star Ride Tomorrow
3 posts, last by:
Stevie
In: Bike Talk, 5/26/2012, 7 replies
Subject: Confused and a little frustrated.
BK177V: I lost the chrome bezel that holds in the lens on the spot light on my 03 roadie. At first I thought it was a Cobra light bar, but I have had some people tell me that it is a factory Yamaha light bar. ...
Latest reply, 5/27/2012
BK177V: I dont think they are Cobra. They do look like the ones in the above picture. I wouldnt mind buying 2 ...Confused and a little frustrated.
8 posts, last by:
BK177V
In: Rides, Meets, Events, 3/16/2012, 100 replies
Subject: Central M&G, 2012 June 29,30, and July 1
fastjohnny: This is the "sign up sheet" for the central Meet & Greet (4th annual) to be held in the Anamosa, IA area. We may wind up staying closer to Cedar Rapids - way more hotels, but I don't know for sure just ...
Latest reply, 5/27/2012
Darn: All are welcome! Come on up. I've got a couple of "Guest rooms" if needed, just ask EMU and Mandy, it's ...Central M&G, 2012 June 29,30, and July 1
101 posts, last by:
Darn
In: Bike Talk, 5/21/2012, 42 replies
Subject: I have gone to the Darkside...
TReynolds: Pirelli RT66 150/80/16 rear tire on Front at 40 psi Austone tire 175SR16 on rear at 38 psi No modifications for fitment Hand mounted both tires and installed myself (Cast Wheels). Front tire seated ...
Latest reply, 5/27/2012
Darn: Dyna-beads are pretty easy to find, just google them. They are the best way to balance a tire, unless ...I have gone to the Darkside...
43 posts, last by:
Darn
In: Bike Talk, 5/8/2012, 38 replies
Subject: My Project
FF56: This will be about the ups and downs of buying my mystery bike. I call it that because I bought it from an estate sale, and have no info about it, but the price was great. So far it has been a challenge, ...
Latest reply, 5/27/2012
Ricohoc: My Project
39 posts, last by:
Ricohoc
In: Electrical/Electronics, 5/25/2012, 18 replies
Subject: Rear tail/brake light lens
FF56: Does anyone know where I can find a clear tail/brake light lens for a 2000 R*, I just installed a red LED tail light and turn signals, found clear turn signal lens, but I seem to not be looking in the ...
Latest reply, 5/27/2012
Ricohoc: Rear tail/brake light lens
19 posts, last by:
Ricohoc




  Privacy Policy | Terms of Service | Spam Policy | Report Abuse

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.

Copyright 2003-2007 Road Star Clinic and its respective authors. Road Star Clinic is sponsored by the folks at MLSHomeQuest.com.