Re:Record Time - Road Star Forum

	Road Star Forum	Forum Threaded View Rules

Welcome, Guest
Please Login or Register. Lost Password?

Road Star Forum

Technical Corner

Jetting

Record Time

Favoured: 0

TOPIC: Record Time

Forum Tools

#74743

vegasdave (User)

Platinum Boarder

Posts: 1158

Record Time 4 Years, 1 Month ago

And this was working steady not hurried.

Removed my carb,rejetted and adjusted float
and reinstalled.....1hr. & 15min.

As you know I`ve been having MPG issues,so
I went back to Mik 170 main,PMS 3(may adjust
some later)left needle at 3rd & stock spacing.
Took a 42 mile jaunt to check out initial running.
Idling excellent(have had some small stumbling),no
hesitation through out the RPM,and tryed to make it
stave for gas,but needed more room.In other words I
did some adjustments and the whole thing didn`t go to
crap.
My gauge for this short run shows alittle under 1/4.
But I know I have to do a 100 miler or so to be for sure.
So far so good.As you know I just used the (Dry)float Adj.
And I did go the wrong way the 1st time.But I went (over)
what it called for to lean up the float bowl.
As always I will let you guys know how it goes

thanks for all your support

Logged

If Your Not Moving Forwards,Your Moving Backwards
Live To Ride,Ride To Live 06 Road Star Candy Red
SMOKIN!!!!

The administrator has disabled public write access.

#74746

Big Bear (Moderator)

Who loves you , Baby?

Moderator

Posts: 6997

Re:Record Time 4 Years, 1 Month ago
X2 BB

Logged

The administrator has disabled public write access.

Forum List

Technical Corner

Jetting

get the latest posts directly to your desktop

...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... -->

New Forum Posts
In: Pics of My Ride, 5/27/2012, 10 replies Subject: Road Glide fairing finally installed polishdog: Not sure if I like it yet, still on the fence. It might just end up on ebay... that way I can get hard bags and maybe duals! Latest reply, 5/27/2012 Spydr: Nope, Don't put them on e-bay. Give Us a shot first. SpydrRoad Glide fairing finally installed 11 posts, last by: Spydr In: Maintenance, 5/27/2012, 9 replies Subject: Low Fuel Light moreland4: This is my first riding season with the HSR 42 and being pumpless. Trying to recall when the low fuel light typically comes on. Does it light up before or after switching to reserve? Asking because ... Latest reply, 5/27/2012 moreland4: Yes, a Pingle.Low Fuel Light 10 posts, last by: moreland4 In: Non Motorcycle Topics, 5/25/2012, 9 replies Subject: How To Catch A Bear jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ... Latest reply, 5/27/2012 buckshot: :laugh: :laugh: My 13 year old grandson loved it to.How To Catch A Bear 10 posts, last by: buckshot In: Bike Talk, 5/27/2012, 3 replies Subject: NEW BIKE roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ... Latest reply, 5/27/2012 Curt: Congrats man enjoy the ride.:)NEW BIKE 4 posts, last by: Curt In: Non Motorcycle Topics, 5/25/2012, 8 replies Subject: Eyelet/Grommet Machine info? Ricohoc: I know this is a motorcycle forum, but this is the "Non Motorcycle Topics" area. :laugh: Anyone here have any knowledge/experience with an eyelet/grommet machine? I've been thinking ... Latest reply, 5/27/2012 buckshot: Check out . The table top style would be a good one. You could use thicker mat. ...Eyelet/Grommet Machine info? 9 posts, last by: buckshot In: Introductions, 5/27/2012, 14 replies Subject: Hello from TN. Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ... Latest reply, 5/27/2012 Curt: Georgeherrin :welcome: from Texas.:)Hello from TN. 15 posts, last by: Curt In: Maintenance, 5/27/2012, 2 replies Subject: front brakes dragging murshes: i noticed the handling on my bike has changed recentley. so i jacked it up and spun the front wheel. i can only get maybe half a rotation when i spin it. i cant get the front brakes to stop dragging. any ... Latest reply, 5/27/2012 Curt: They all rub the pistons don't retract far enough to keep the pad off the rotor. If you have too much ...front brakes dragging 3 posts, last by: Curt In: Introductions, 5/26/2012, 23 replies Subject: Hello from the Region kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it. Latest reply, 5/27/2012 buckshot: :welcome: from Northeast IowaHello from the Region 24 posts, last by: buckshot In: Maintenance, 4/22/2012, 20 replies Subject: Intake manifold jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ... Latest reply, 5/27/2012 saab9k: That manifold is not a easy one to reproduce. To make it competitive you have to do a 1 piece cast, ...Intake manifold 21 posts, last by: saab9k In: Bolt Ons, 5/26/2012, 20 replies Subject: New Handlebars - Stock Grips? alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ... Latest reply, 5/27/2012 dvblair: oops didn't read all the posts, but if anyone wants them they are for sale.New Handlebars - Stock Grips? 21 posts, last by: dvblair In: Non Motorcycle Topics, 5/26/2012, 28 replies Subject: Thank you, all who served. fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny) Latest reply, 5/27/2012 brown91redcam: Thank you to all those that are serving and have served our great country we all owe our gratitude for ...Thank you, all who served. 29 posts, last by: brown91redcam In: Bike Talk, 5/27/2012, 3 replies Subject: help needed : Road Star "Ultra" mods Chevyhoss: Good Afternoon Everyone, Posted on another topic earlier today but here goes... It's been quite awhile since I have posted on here but the "Outta Here" thread caught my interest. My wife's ... Latest reply, 5/27/2012 ultrastar: Keith when I did mIne I went with all fiberglass parts the only PVC part on my bike is the HD lower fairing. ...help needed : Road Star "Ultra" mods 4 posts, last by: ultrastar In: Rides, Meets, Events, 5/14/2012, 85 replies Subject: WNC Meet and Greet theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ... Latest reply, 5/27/2012 moreland4: Ask moreland4 ... he has been there... we live at the top of a mountain on a dead end drive that ...WNC Meet and Greet 86 posts, last by: moreland4 In: Electrical/Electronics, 5/27/2012, 6 replies Subject: Bike won't start. Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ... Latest reply, 5/27/2012 fireman922: Fuel pump relay?Bike won't start. 7 posts, last by: fireman922 In: Rides, Meets, Events, 5/27/2012, 1 reply Subject: Seaside Bike Fest, 2nd week of July River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out. Latest reply, 5/27/2012 Shadowofself: I usually ride down even if just for a day trip. Just got Roadie so will be a different ride this year. DanSeaside Bike Fest, 2nd week of July 2 posts, last by: Shadowofself In: Technical Discussions, 5/26/2012, 23 replies Subject: advice on tail bags for a road trip. smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ... Latest reply, 5/27/2012 Doc_V: Call me crazy, but I think there's something cool about a bike loaded with gear. B) Whenever I see ...advice on tail bags for a road trip. 24 posts, last by: Doc_V In: Bolt Ons, 5/26/2012, 28 replies Subject: Flag mounts for 6"x9" Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them? Latest reply, 5/27/2012 Darn: The angle iron was actually pretty easy to do, but the U-bolts I bought were too long so after I put ...Flag mounts for 6"x9" 29 posts, last by: Darn In: Bike Talk, 5/26/2012, 3 replies Subject: Side Car mounting Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ... Latest reply, 5/27/2012 USAFRETIRED: Post a picture of the sidecar. Might be able to identify it.Side Car mounting 4 posts, last by: USAFRETIRED In: Bike Talk, 5/21/2012, 30 replies Subject: Qutta here WhiteStarNC: Folks - after 6 years as a Road Star owner and forum member I just wanted to say thanks for all the help, community, support and laughs I have gotten from this forum. I road the Roadie to the Myrtle ... Latest reply, 5/27/2012 Blagonravov: roadstarclinic.com is wonderful. There's always all of the ideal info in the ideas of my fingers. Thanks ...Qutta here 31 posts, last by: Blagonravov In: Bike Talk, 5/27/2012, 2 replies Subject: Interesting fact River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ... Latest reply, 5/27/2012 River: I don't know Erbman, it registers 14.1 to 4.5 instead of 14.1 to 4.7 so I guess that would be a decimal. ...Interesting fact 3 posts, last by: River In: Electrical/Electronics, 5/26/2012, 18 replies Subject: So much for simple bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ... Latest reply, 5/27/2012 brown91redcam: I have seen the load equalizers at auto parts store near the bulbs,it is a inline resistor that simulates ...So much for simple 19 posts, last by: brown91redcam In: Miscellaneous, 5/26/2012, 12 replies Subject: Let the summer begin...(not quite) h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ... Latest reply, 5/27/2012 armybronco: I agree with Blue Star! At the very least the bill for ANY work should be cut by 1/2 if not 2/3!!!!:woohoo: ...Let the summer begin...(not quite) 13 posts, last by: armybronco In: Electrical/Electronics, 5/26/2012, 8 replies Subject: Solar Pulse Battery Energy Power Charger? Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ... Latest reply, 5/27/2012 Ricohoc: :laugh:Solar Pulse Battery Energy Power Charger? 9 posts, last by: Ricohoc In: Non Motorcycle Topics, 5/25/2012, 27 replies Subject: I'm Torn Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ... Latest reply, 5/27/2012 Darn: I had a Cruisers Vee Express 30ft (not as new as the one your showing) but I loved it, hated to get rid ...I'm Torn 28 posts, last by: Darn In: Miscellaneous, 5/26/2012, 17 replies Subject: this clinic has shown its true greatness yet again smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ... Latest reply, 5/27/2012 Boatmark: I frequent a coupla other forums on the net and the RSC is the one I always find myself at the most. ...this clinic has shown its true greatness yet again 18 posts, last by: Boatmark In: Website General, 5/27/2012, 12 replies Subject: Members by location. Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ... Latest reply, 5/27/2012 BC1955: I tried to get the little house to show up user name when I post but it does not. What do I need to ...Members by location. 13 posts, last by: BC1955 In: Bike Talk, 5/26/2012, 15 replies Subject: Changing the shock spring Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press? Latest reply, 5/27/2012 BC1955: No Stevie, I changed out the stock relay arm to the Baron's. I still have the stock dog bones but a ...Changing the shock spring 16 posts, last by: BC1955 In: Miscellaneous, 4/19/2012, 9 replies Subject: Hey Stevie... OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh: Latest reply, 5/27/2012 SKWEARpeg: We have a whole generation of people out there, who's entire life is comprised of their Smart phone, ...Hey Stevie... 10 posts, last by: SKWEARpeg In: Non Motorcycle Topics, 5/27/2012, 10 replies Subject: It's 3:00 am ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh: Latest reply, 5/27/2012 Edge51: booIt's 3:00 am 11 posts, last by: Edge51 In: Bike Talk, 5/26/2012, 20 replies Subject: Road trip tool kit About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ... Latest reply, 5/27/2012 About_Time: VWH...thanks for posting this. I think I've seen it before, but it was one of those types of things ...Road trip tool kit 21 posts, last by: About_Time

New Forum Posts

In: Pics of My Ride, 5/27/2012, 10 replies
Subject: Road Glide fairing finally installed
polishdog: Not sure if I like it yet, still on the fence. It might just end up on ebay... that way I can get hard bags and maybe duals!

Latest reply, 5/27/2012
Spydr: Nope, Don't put them on e-bay. Give Us a shot first. SpydrRoad Glide fairing finally installed

11 posts, last by:

Spydr

In: Maintenance, 5/27/2012, 9 replies
Subject: Low Fuel Light
moreland4: This is my first riding season with the HSR 42 and being pumpless. Trying to recall when the low fuel light typically comes on. Does it light up before or after switching to reserve? Asking because ...

Latest reply, 5/27/2012
moreland4: Yes, a Pingle.Low Fuel Light

10 posts, last by:

moreland4

In: Non Motorcycle Topics, 5/25/2012, 9 replies
Subject: How To Catch A Bear
jeckes: Not sure if I posted this before, but my teenage daughter told me this one. How to catch a bear. 1. Dig a big deep hole. 2. Fill the hole with ashes. 3. Surround the top of the hole with frozen peas. When ...

Latest reply, 5/27/2012
buckshot: :laugh: :laugh: My 13 year old grandson loved it to.How To Catch A Bear

10 posts, last by:

buckshot

In: Bike Talk, 5/27/2012, 3 replies
Subject: NEW BIKE
roadstar16002000: Have traded in 2000 Road Star Silverado with 81,000klms for a 2012 Royal Star Venture S no klms.Deal was done last Fri.May 18th Got can. trade-in. Put on passing lights,driver's back-rest,trunk ...

Latest reply, 5/27/2012
Curt: Congrats man enjoy the ride.:)NEW BIKE

4 posts, last by:

Curt

In: Non Motorcycle Topics, 5/25/2012, 8 replies
Subject: Eyelet/Grommet Machine info?
Ricohoc: I know this is a motorcycle forum, but this is the "Non Motorcycle Topics" area. :laugh: Anyone here have any knowledge/experience with an eyelet/grommet machine? I've been thinking ...

Latest reply, 5/27/2012
buckshot: Check out . The table top style would be a good one. You could use thicker mat. ...Eyelet/Grommet Machine info?

9 posts, last by:

buckshot

In: Introductions, 5/27/2012, 14 replies
Subject: Hello from TN.
Georgeherrin: Hi new to the forum and thought I would let folks know a bit about me. I am happily married 5 children 13 to 25 and 6 grand children. I live in Hohenwald Tn. Pure country. My first license was a bike license. ...

Latest reply, 5/27/2012
Curt: Georgeherrin :welcome: from Texas.:)Hello from TN.

15 posts, last by:

Curt

In: Maintenance, 5/27/2012, 2 replies
Subject: front brakes dragging
murshes: i noticed the handling on my bike has changed recentley. so i jacked it up and spun the front wheel. i can only get maybe half a rotation when i spin it. i cant get the front brakes to stop dragging. any ...

Latest reply, 5/27/2012
Curt: They all rub the pistons don't retract far enough to keep the pad off the rotor. If you have too much ...front brakes dragging

3 posts, last by:

Curt

In: Introductions, 5/26/2012, 23 replies
Subject: Hello from the Region
kozaturf: New to the clinic and wanted to say hi from "The Region" (NWI) Just picked up my Roadie on Monday and love it.

Latest reply, 5/27/2012
buckshot: :welcome: from Northeast IowaHello from the Region

24 posts, last by:

buckshot

In: Maintenance, 4/22/2012, 20 replies
Subject: Intake manifold
jd750ace: Does anyone have a technical drawing of the intake manifold? I'd like to look into producing an all-metal unit that is already ported out and ready to go. I can apply "fixes" to the stocker, but it's ...

Latest reply, 5/27/2012
saab9k: That manifold is not a easy one to reproduce. To make it competitive you have to do a 1 piece cast, ...Intake manifold

21 posts, last by:

saab9k

In: Bolt Ons, 5/26/2012, 20 replies
Subject: New Handlebars - Stock Grips?
alltimeqb: You guys might flog me but I just put a pair of Krome Werks Dyna Wide Glide handle bars on the R*. Liked the looks of them on eBay, still warming up to 'em on the Roadie. But, what the heck are you ...

Latest reply, 5/27/2012
dvblair: oops didn't read all the posts, but if anyone wants them they are for sale.New Handlebars - Stock Grips?

21 posts, last by:

dvblair

In: Non Motorcycle Topics, 5/26/2012, 28 replies
Subject: Thank you, all who served.
fireman922: It is not National BBQ Day. I am honored to thank all of you and the families who also served. (Stolen from FastJohnny)

Latest reply, 5/27/2012
brown91redcam: Thank you to all those that are serving and have served our great country we all owe our gratitude for ...Thank you, all who served.

29 posts, last by:

brown91redcam

In: Bike Talk, 5/27/2012, 3 replies
Subject: help needed : Road Star "Ultra" mods
Chevyhoss: Good Afternoon Everyone, Posted on another topic earlier today but here goes... It's been quite awhile since I have posted on here but the "Outta Here" thread caught my interest. My wife's ...

Latest reply, 5/27/2012
ultrastar: Keith when I did mIne I went with all fiberglass parts the only PVC part on my bike is the HD lower fairing. ...help needed : Road Star "Ultra" mods

4 posts, last by:

ultrastar

In: Rides, Meets, Events, 5/14/2012, 85 replies
Subject: WNC Meet and Greet
theGRINDER: Ok guys, gals, friends and neighbors... time for a meet and greet with a garage day... I can't promise to get everything together myself, so I may need some help on this one... I will be working 7 10 hour ...

Latest reply, 5/27/2012
moreland4: Ask moreland4 ... he has been there... we live at the top of a mountain on a dead end drive that ...WNC Meet and Greet

86 posts, last by:

moreland4

In: Electrical/Electronics, 5/27/2012, 6 replies
Subject: Bike won't start.
Dealer5d: Last noght I shut off bike to make a phone call. Well after that it refused to start. After towing it home I pulled off the tank and the fuel pump cover and I don't seem to be getting any power to the ...

Latest reply, 5/27/2012
fireman922: Fuel pump relay?Bike won't start.

7 posts, last by:

fireman922

In: Rides, Meets, Events, 5/27/2012, 1 reply
Subject: Seaside Bike Fest, 2nd week of July
River: We are having the Seaside Oregon bike fest the 2nd week of July. We usually have a good turn out.

Latest reply, 5/27/2012
Shadowofself: I usually ride down even if just for a day trip. Just got Roadie so will be a different ride this year. DanSeaside Bike Fest, 2nd week of July

2 posts, last by:

Shadowofself

In: Technical Discussions, 5/26/2012, 23 replies
Subject: advice on tail bags for a road trip.
smokescreens: guys im gunna try my arse off to make it to the NC meet in oct. but i need to have more space for my cloths and such.im looking at this tailbag from saddlemen anyone else running it? it looks good and ...

Latest reply, 5/27/2012
Doc_V: Call me crazy, but I think there's something cool about a bike loaded with gear. B) Whenever I see ...advice on tail bags for a road trip.

24 posts, last by:

Doc_V

In: Bolt Ons, 5/26/2012, 28 replies
Subject: Flag mounts for 6"x9"
Planet42: I recently joined PGR, and am interested in mounting 2 6"x9" flags to the back of my R* - maybe off the license plate. Does anyone have any suggestions on what mounts are good and where I can get them?

Latest reply, 5/27/2012
Darn: The angle iron was actually pretty easy to do, but the U-bolts I bought were too long so after I put ...Flag mounts for 6"x9"

29 posts, last by:

Darn

In: Bike Talk, 5/26/2012, 3 replies
Subject: Side Car mounting
Inubus: Ok since I have to work on the bike anyway, I'm gonna take the side car off the goldwing and get rid of the wiring nightmare it is turning out to be. I think the R* will pull the sidecar better than this ...

Latest reply, 5/27/2012
USAFRETIRED: Post a picture of the sidecar. Might be able to identify it.Side Car mounting

4 posts, last by:

USAFRETIRED

In: Bike Talk, 5/21/2012, 30 replies
Subject: Qutta here
WhiteStarNC: Folks - after 6 years as a Road Star owner and forum member I just wanted to say thanks for all the help, community, support and laughs I have gotten from this forum. I road the Roadie to the Myrtle ...

Latest reply, 5/27/2012
Blagonravov: roadstarclinic.com is wonderful. There's always all of the ideal info in the ideas of my fingers. Thanks ...Qutta here

31 posts, last by:

Blagonravov

In: Bike Talk, 5/27/2012, 2 replies
Subject: Interesting fact
River: Here a while back we discussed the big question that if you change the pipes and put on a big air kit (or equivalent) will the fuel injected bikes (Roadies)run lean (or leaner) and no, they will not. Here ...

Latest reply, 5/27/2012
River: I don't know Erbman, it registers 14.1 to 4.5 instead of 14.1 to 4.7 so I guess that would be a decimal. ...Interesting fact

3 posts, last by:

River

In: Electrical/Electronics, 5/26/2012, 18 replies
Subject: So much for simple
bencadenbach: I had a great idea to get rid of stock turn signals and use LED strips wrapped around the forks and all seemed pretty simple and strait forward and get a nice clean look. Well I got everything installed ...

Latest reply, 5/27/2012
brown91redcam: I have seen the load equalizers at auto parts store near the bulbs,it is a inline resistor that simulates ...So much for simple

19 posts, last by:

brown91redcam

In: Miscellaneous, 5/26/2012, 12 replies
Subject: Let the summer begin...(not quite)
h_unzeki: Took the bike to my mechanic the other day to have my Progressive Spring mounted (finally)- along with a few other mind details. Called him this morning to see if my baby was done and got ahold of his ...

Latest reply, 5/27/2012
armybronco: I agree with Blue Star! At the very least the bill for ANY work should be cut by 1/2 if not 2/3!!!!:woohoo: ...Let the summer begin...(not quite)

13 posts, last by:

armybronco

In: Electrical/Electronics, 5/26/2012, 8 replies
Subject: Solar Pulse Battery Energy Power Charger?
Ricohoc: http://www.fleetsafety.com/Solar-Pulse-Battery-Energy-Power-Charger-by-Pulsetech-506 Description: ...

Latest reply, 5/27/2012
Ricohoc: :laugh:Solar Pulse Battery Energy Power Charger?

9 posts, last by:

Ricohoc

In: Non Motorcycle Topics, 5/25/2012, 27 replies
Subject: I'm Torn
Stevie: Walk Around Cuddy Fishing Boat Or Express Cruiser... The ...

Latest reply, 5/27/2012
Darn: I had a Cruisers Vee Express 30ft (not as new as the one your showing) but I loved it, hated to get rid ...I'm Torn

28 posts, last by:

Darn

In: Miscellaneous, 5/26/2012, 17 replies
Subject: this clinic has shown its true greatness yet again
smokescreens: so as many of you know i have been dealing with a venders horrible customer service and overall operation issues and that has put my bike down at the start of the michigan 6-7 month riding season. and ...

Latest reply, 5/27/2012
Boatmark: I frequent a coupla other forums on the net and the RSC is the one I always find myself at the most. ...this clinic has shown its true greatness yet again

18 posts, last by:

Boatmark

In: Website General, 5/27/2012, 12 replies
Subject: Members by location.
Mudslide: I ride every day unless I know it's going to be pouring rain. I see Roadstars everywhere everyday. But there is no way to tell if any are members here. So......Admin, would it be possible to have a location ...

Latest reply, 5/27/2012
BC1955: I tried to get the little house to show up user name when I post but it does not. What do I need to ...Members by location.

13 posts, last by:

BC1955

In: Bike Talk, 5/26/2012, 15 replies
Subject: Changing the shock spring
Stevie: I'm going to lower my bike with the lowering links but it's been suggested to change the shock spring Is there a way to change it without a press?

Latest reply, 5/27/2012
BC1955: No Stevie, I changed out the stock relay arm to the Baron's. I still have the stock dog bones but a ...Changing the shock spring

16 posts, last by:

BC1955

In: Miscellaneous, 4/19/2012, 9 replies
Subject: Hey Stevie...
OK, just JB..: Saw a commercial last night on Discovery about a new show following a MC from San Diego. Heard anything about it/them? :huh:

Latest reply, 5/27/2012
SKWEARpeg: We have a whole generation of people out there, who's entire life is comprised of their Smart phone, ...Hey Stevie...

10 posts, last by:

SKWEARpeg

In: Non Motorcycle Topics, 5/27/2012, 10 replies
Subject: It's 3:00 am
ironman: just looked @ "who's on line" Thought I was the only one who's bat-crap crazy for being up at this hour, looking at a computer. GO TO BED !!!! Have a safe weekend everyone:laugh: :laugh: :laugh:

Latest reply, 5/27/2012
Edge51: booIt's 3:00 am

11 posts, last by:

Edge51

In: Bike Talk, 5/26/2012, 20 replies
Subject: Road trip tool kit
About_Time: I remember a recent thread on this subject, but after a half hour of worthless search results :censored:, I figured it was just easier to ask again. So here goes. I'm going to Americade next week and ...

Latest reply, 5/27/2012
About_Time: VWH...thanks for posting this. I think I've seen it before, but it was one of those types of things ...Road trip tool kit

21 posts, last by:

About_Time

The Road Star Clinic is a collaborative community of riders who archive and publish user contributed technical data about Yamaha Road Star motorcycles.

We also sponsor the creation and support of other community websites similar to our own. Inquiries about availability of a website for your community can be submitted to us via any "Contact Us" option on the Clinic.